Corrosion-Resistant Hydraulic Cylinders
Made of 303 stainless steel, these hydraulic cylinders move heavy loads without corroding in wet areas. Four tie rods protect the barrel from impact and keep the end caps secure. These cylinders are double acting, meaning they pull loads as well as push them—and do so with nearly as much force. The mounting footprint meets NFPA and JIC (Joint Industrial Congress) compatibility standards.
Because they have a magnetic piston, these cylinders can be used with tie rod-mount proximity switches (not included) to indicate piston position. All have an adjustable cushion that cuts down on shock and noise.
For technical drawings and 3-D models, click on a part number.
O'all | Mounting Hole | Inlet/Outlet Connection— NPTF | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Max. Push Force, lbs. | Max. Pull Force, lbs. | Retracted Lg. | Extended Lg. | Rod Thread Size  | Wd. | Ht. | Ctr.-to-Ctr. | Dia. | Pipe Size | Dash Size | Body Material | Max. Pressure, psi | Air Cushion Type | Each | |
NFPA and JIC Heavy Duty Mounting Pattern | ||||||||||||||||
1 1/2" Bore Dia. | ||||||||||||||||
| 1" | 700 | 580 | 6 13/16" | 7 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 0000000 |
| 2" | 700 | 580 | 7 13/16" | 9 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 4" | 700 | 580 | 9 13/16" | 13 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 6" | 700 | 580 | 11 13/16" | 17 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 8" | 700 | 580 | 13 13/16" | 21 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 12" | 700 | 580 | 17 13/16" | 29 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
2" Bore Dia. | ||||||||||||||||
| 1" | 1,250 | 1,130 | 6 15/16" | 7 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 2" | 1,250 | 1,130 | 7 15/16" | 9 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 4" | 1,250 | 1,130 | 9 15/16" | 13 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 6" | 1,250 | 1,130 | 11 15/16" | 17 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 8" | 1,250 | 1,130 | 13 15/16" | 21 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 12" | 1,250 | 1,130 | 17 15/16" | 29 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
2 1/2" Bore Dia. | ||||||||||||||||
| 1" | 1,960 | 1,840 | 7 1/16" | 8 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 2" | 1,960 | 1,840 | 8 1/16" | 10 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 4" | 1,960 | 1,840 | 10 1/16" | 14 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 6" | 1,960 | 1,840 | 12 1/16" | 18 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 8" | 1,960 | 1,840 | 14 1/16" | 22 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 12" | 1,960 | 1,840 | 18 1/16" | 30 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| For Bore Dia. | Material | Mounting Fasteners Included | Each | |
Clevis Rod Ends | ||||
|---|---|---|---|---|
| 1 1/2" | Stainless Steel | __ | 0000000 | 0000000 |
| 2", 2 1/2" | Stainless Steel | __ | 0000000 | 000000 |
Pivot Brackets | ||||
| 1 1/2" | Stainless Steel | No | 0000000 | 000000 |
| 2", 2 1/2" | Stainless Steel | No | 0000000 | 000000 |
Clevis Pins | ||||
| 1 1/2" | 17-4 Stainless Steel | __ | 0000000 | 000000 |
| 2", 2 1/2" | 17-4 Stainless Steel | __ | 0000000 | 000000 |
Clevis Brackets with Clevis Pin | ||||
| 1 1/2" | Stainless Steel | No | 0000000 | 000000 |
| 2", 2 1/2" | Stainless Steel | No | 0000000 | 00000000 |
Rams for Hydraulic Jacks
Push or pry apart material with these rams by attaching them to a hydraulic pump. Use hose to connect the ram to a pump; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
Style A rams are wedge-shaped to squeeze into tight spaces to pry, lift, and spread.
Style B-D rams lift or push material. Style B rams have a lower profile than Style C rams. Style D rams have an unthreaded hole through the center that can be used to create a pulling action. Run a threaded rod through the bottom of the ram and fasten or weld the rod to the material you are trying to pull. Often used to free stuck parts.
Rams with collar threads are threaded at the top of the ram for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | tons | lbs. | Ht. | Max. Lift | Ram Oil Capacity, cu. in. | Dia. | Lg. | Wd. | Ram Collar Thread Size | Ram Center Hole Dia. | Max. Pressure, psi | Pipe Size | Thread Type | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| A | 1 | 2,000 | 1/2"-4 1/4" | 3 3/4" | 0.7 | __ | 6 1/2" | 2 1/4" | __ | __ | 8,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 0000000 |
| A | 1 | 2,000 | 1 3/8"-13 1/8" | 11 3/4" | 3.4 | __ | 21" | 2 3/8" | __ | __ | 8,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 00000000 |
| B | 5 | 10,000 | 1 3/8"-1 5/8" | 1/4" | 0.2 | __ | 2 9/16" | 1 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/16" | 0000000 | 000000 |
| B | 5 | 10,000 | 1 3/4"-2 1/4" | 1/2" | 0.6 | __ | 2 9/16" | 1 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/16" | 000000 | 000000 |
| B | 10 | 20,000 | 1 3/4"-2 1/4" | 1/2" | 0.9 | __ | 3 1/4" | 2 3/16" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| B | 20 | 40,000 | 2 1/8"-2 5/8" | 1/2" | 2 | __ | 4" | 3" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 000000 | 000000 |
| B | 30 | 60,000 | 2 1/4"-2 3/4" | 1/2" | 3.2 | __ | 4 1/2" | 3 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| B | 50 | 100,000 | 2 5/8"-3 1/8" | 1/2" | 6.9 | __ | 5 1/2" | 5" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 0.9 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 000000 | 000000 |
| C | 5 | 10,000 | 6 5/8"-9 3/4" | 3 1/8" | 2.9 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 8 1/2"-13 5/8" | 5 1/8" | 5 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 10 3/4"-17 7/8" | 7 1/8" | 7 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 12 7/8"-22" | 9 1/8" | 9.1 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 10 | 20,000 | 3 1/2"-5" | 1 1/2" | 3.4 | 2 3/4" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 000000 |
| C | 10 | 20,000 | 4 7/8"-7" | 2 1/8" | 4.1 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 10 | 20,000 | 9 3/4"-15 3/4" | 6" | 13.7 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 10 | 20,000 | 13 3/4"-23 3/4" | 10" | 22.7 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 15 | 30,000 | 10 3/4"-17 1/8" | 6 3/8" | 19 | 2 3/4" | __ | __ | 2 3/4"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 000000 |
| C | 20 | 40,000 | 3 7/8"-5 5/8" | 1 3/4" | 7.8 | 3 5/8" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 000000 |
| C | 25 | 50,000 | 10 3/4"-16 7/8" | 6 1/8" | 32.2 | 3 1/2" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 000000 |
| C | 25 | 50,000 | 18 3/4"-32 7/8" | 14 1/8" | 73.4 | 3 1/2" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 15.8 | 4" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 000000 |
| C | 30 | 60,000 | 15 1/4"-23 1/2" | 8 1/4" | 53.6 | 4" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 000000 | 00000000 |
| C | 50 | 100,000 | 4 7/8"-7 1/4" | 2 3/8" | 22.8 | 4 7/8" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 00000000 |
| C | 55 | 110,000 | 11 1/8"-17 1/4" | 6 1/8" | 69 | 5" | __ | __ | 5"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 100 | 200,000 | 5 5/8"-7 7/8" | 2 1/4" | 44.2 | 6 1/2" | __ | __ | __ | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 0000000 | 00000000 |
| C | 100 | 200,000 | 14 1/8"-20 3/4" | 6 5/8" | 137 | 7" | __ | __ | 6 7/8"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/4" | 000000 | 00000000 |
| D | 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 8.3 | 2 3/4" | __ | __ | 2 3/4"-16 | 3/4" | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 00000000 |
| D | 20 | 40,000 | 6 1/2"-8 1/2" | 2" | 9.4 | 3 7/8" | __ | __ | 3 7/8"-12 | 1" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 18 | 4 1/2" | __ | __ | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 13"-19 1/8" | 6 1/8" | 44.2 | 4 1/2" | __ | __ | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 60 | 120,000 | 9 3/4"-12 3/4" | 3" | 38.2 | 6 1/4" | __ | __ | 6 1/4"-12 | 2 1/8" | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
Flow-Adjustment Manifolds for Hydraulic Jacks
Connect up to four rams and a gauge to a pump. Ram connections have flow-adjustment valves that control the flow of oil to adjust ram speed or shut it off to temporarily hold a load. Combine two or more manifolds for larger systems.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Thread Type | Gender | Max. Pressure, psi | Material | Includes | Each | |
| 3/8 | NPTF | Female | 10,000 | Steel | 18" Long Rubber Hose | 0000000 | 000000000 |
Compact Manifolds for Hydraulic Jacks
Connect up to five rams to a single pump. Includes plugs to cover ports not in use.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Ports | Pipe Size | Thread Type | Gender | Max. Pressure, psi | Material | Fasteners Included | No. of Holes | Hole Dia. | Includes | Each | |
| 6 | 3/8 | NPTF | Female | 10,000 | Steel | No | 2 | 1/4" | Four Plugs | 0000000 | 0000000 |
Pumps for Hydraulic Jacks
Connect these pumps to a ram to create a hydraulic jack. Use hose to connect; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
To use Style 1 and 2 pumps vertically, point the pump head (where the handle meets the pump) downward. Style 2 pumps are made of aluminum, making them lighter and more corrosion resistant than steel and iron pumps.
Style 3 pumps are also known as trailer pumps and have a body that is taller than it is long to fit in a narrow space. Use as part of a permanent lifting system.
Style 4, 5, and 6 pumps use air power to operate where electricity is not available and require minimal effort. Use the pedal with your hand or foot to activate and release your ram.
Style 7 and 8 pumps operate from up to 10 ft. away using the included wired remote.
Pumps with two-speeds are quick to pump until the load is engaged, then pump more slowly for precise positioning.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Pump | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Working Orientation | Oil Capacity, cu. in. | No. of Speeds | Lg. | Wd. | Ht. | Max. Pressure, psi | Pipe Size | Thread Type | Gender | Material | Fasteners Included | No. of Holes | Hole Dia. | Plug Type | Includes | Each | |
Manual | ||||||||||||||||||
| 1 | Horizontal, Vertical | 20 | 2 | 14 1/4" | 5" | 5 1/8" | 10,000 | 3/8 | NPTF | Female | Steel | No | 2 | 1/4" | __ | __ | 0000000 | 0000000 |
| 1 | Horizontal, Vertical | 45 | 1 | 24 7/8" | 5 3/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Steel | __ | __ | __ | __ | __ | 0000000 | 000000 |
| 1 | Horizontal, Vertical | 45 | 2 | 25 5/8" | 5 3/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Steel | __ | __ | __ | __ | __ | 0000000 | 000000 |
| 1 | Horizontal, Vertical | 145 | 2 | 23" | 5 1/2" | 6 5/8" | 10,000 | 3/8 | NPTF | Female | Steel | No | 4 | 7/16" | __ | __ | 0000000 | 000000 |
| 2 | Horizontal, Vertical | 20 | 1 | 13 1/4" | 3 3/4" | 5 5/8" | 10,000 | 1/4 | NPTF | Female | Aluminum | No | 2 | 1/4" | __ | __ | 000000 | 000000 |
| 2 | Horizontal, Vertical | 20 | 2 | 13 1/4" | 3 3/4" | 5 5/8" | 10,000 | 1/4 | NPTF | Female | Aluminum | No | 2 | 1/4" | __ | __ | 000000 | 000000 |
| 2 | Horizontal, Vertical | 55 | 2 | 21" | 4 3/4" | 7" | 10,000 | 3/8 | NPTF | Female | Aluminum | __ | __ | __ | __ | __ | 000000 | 000000 |
| 2 | Horizontal, Vertical | 155 | 2 | 21 3/4" | 7 1/8" | 9" | 10,000 | 3/8 | NPTF | Female | Aluminum | No | 2 | 3/8" | __ | __ | 000000 | 00000000 |
| 3 | Vertical | 148 | 1 | 8" | 8" | 11 1/8" | 3,000 | 3/8 | NPTF | Female | Cast Iron | No | 4 | 9/16" | __ | __ | 00000000 | 00000000 |
| 3 | Vertical | 148 | 1 | 8" | 8" | 11 1/8" | 6,500 | 3/8 | NPTF | Female | Cast Iron | No | 4 | 9/16" | __ | __ | 00000000 | 00000000 |
| 3 | Vertical | 148 | 1 | 8" | 8" | 11 1/8" | 12,000 | 3/8 | NPTF | Female | Cast Iron | No | 4 | 9/16" | __ | __ | 00000000 | 00000000 |
Air | ||||||||||||||||||
| 4 | Horizontal | 36 | 1 | 14 3/4" | 5 5/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 5/16" | __ | __ | 00000000 | 00000000 |
| 5 | Horizontal | 90 | 1 | 10 5/8" | 5 3/4" | 8 1/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/8" | __ | __ | 00000000 | 000000 |
| 6 | Horizontal | 127 | 1 | 13 5/8" | 6 1/2" | 8 3/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/16" | __ | __ | 00000000 | 00000000 |
Electric | ||||||||||||||||||
| 7 | Vertical | 116 | 2 | 9 5/8" | 9 5/8" | 14 1/4" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/8" | Three Prong | Remote Control with 10-ft. Cord | 00000000 | 00000000 |
| 8 | Vertical | 590 | 2 | 11 1/2" | 9 1/2" | 19 5/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 1/2" | NEMA 5-20 | Remote Control with 10-ft. Cord | 0000000 | 00000000 |
Hose Fittings for Hydraulic Jacks
Use these fittings with hydraulic hose. They are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.
For technical drawings and 3-D models, click on a part number.
| Type | Pipe Size | Thread Type | Swivel Type | Max. Pressure, psi | Material | Each | |
| Straight Connector | 3/8 (Female) × 3/8 (Female) | NPTF | __ | 10,000 | Steel | 0000000 | 000000 |
| Straight Connector | 3/8 (Male) × 3/8 (Male) | NPTF | __ | 10,000 | Steel | 0000000 | 00000 |
| Straight Connector | 3/8 (Male) × 3/8 (Male) | NPTF | __ | 10,000 | Steel | 0000000 | 00000 |
| Straight Adapter | 3/8 (Female) × 3/8 (Male) | NPTF | Swivels Until Tightened | 10,000 | Steel | 0000000 | 000000 |
| Straight Reducing Adapter | 3/8 (Female) × 1/4 (Male) | NPTF | __ | 10,000 | Steel | 0000000 | 00000 |
| Straight Reducing Adapter | 3/8 (Male) × 1/4 (Female) | NPTF | __ | 10,000 | Steel | 0000000 | 00000 |
| Straight Reducer | 3/8 (Female) × 1/4 (Female) | NPTF | __ | 10,000 | Steel | 0000000 | 00000 |
| 90° Elbow Connector | 3/8 (Female) × 3/8 (Female) | NPTF | __ | 10,000 | Steel | 0000000 | 00000 |
| Tee Connector | 3/8 (Female) × 3/8 (Female) | NPTF | __ | 10,000 | Steel | 0000000 | 00000 |
Hose Couplings for Hydraulic Jacks
Connect a hose to a ram or pump.
Quick Disconnect—High-pressure minimal spill couplings have a flat face, which ensures minimal fluid loss when connecting and disconnecting your hose line. They're double-shut-off style, so there is a valve in both the plug and the socket. To connect, push the plug into the socket until you hear a "click." To disconnect, slide the sleeve forward until the plug ejects.
For technical drawings and 3-D models, click on a part number.
Hose for Hydraulic Jacks
This steel-reinforced hose has male threads.
Plastic hose consists of multiple layers for abrasion resistance and long life.
For technical drawings and 3-D models, click on a part number.
Black Rubber | Yellow Plastic | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Max. Pressure, psi | Lg., ft. | Reinforcement Material | Each | Each | ||
| 1/4, 3/8 | NPTF | Male | 10,000 | 6 | Steel | 000000 | 0000000 | 0000000 | 0000000 |
| 1/4 | NPTF | Male | 10,000 | 6 | Steel | 000000 | 00000 | 000000 | 00 |
| 3/8 | NPTF | Male | 10,000 | 6 | Steel | 000000 | 000000 | 0000000 | 000000 |
| 3/8 | NPTF | Male | 10,000 | 10 | Steel | 000000 | 000000 | 0000000 | 000000 |
| 3/8 | NPTF | Male | 10,000 | 20 | Steel | 000000 | 000000 | 0000000 | 000000 |
Flow-Adjustment Valves for Hydraulic Jacks
Control the flow of oil to adjust ram speed, or shut it off to temporarily hold a load.
For technical drawings and 3-D models, click on a part number.