Hydraulic Power Units

Filter by

System of Measurement

Voltage

Power

Maximum Pressure

1,000 psi to 1,999 psi

2,000 psi to 2,999 psi

3,000 psi to 9,999 psi

10,000 psi or greater

Capacity

Number of Ports

For Use With

Maximum Flow Rate

Pipe Size

Flow Rate

Electrical Phase

Material

Power Source

Connection Port

Thread Type

UN/UNF (SAE Straight)

UNF

Dash Size

Overall Height

Overall Length

Shaft Diameter

Fixed Displacement Rate

Number of Mounting Holes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

REACH

56 Products

Create and supply hydraulic pressure. Choose a unit with a tank capacity about three times greater than your requirement to allow for heat dissipation. An inlet filter protects the pump from contamination.

All units include an additional NPTF threaded inlet port. NPTF (Dryseal) threads are compatible with NPT threads. UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.

					Overall			Inlet Connection — UN/UNF (SAE Straight)		Inlet Connection — NPTF		Outlet Connection — UN/UNF (SAE Straight)
	Max. Flow Rate, gpm	Max. Pressure, psi	Power, hp	Cap., gal.	Lg.	Wd.	Ht.	Thread Size	Dash Size	Pipe Size	Dash Size	Thread Size	Dash Size	Full Load Current @ Voltage		Each
240V AC/460V AC, Three Phase



		0.9	1,600	1	5	13"	15"	20 1/2"	7/8"-14	10	1/2	08	7/8"-14	10	1.5 amp @ 460V AC	62915K31	000000000


		1.3	2,300	2	5	13"	15"	24 1/2"	7/8"-14	10	1/2	08	7/8"-14	10	2.8 amp @ 460V AC	62915K32	00000000
		2.7	1,750	3	10	17 3/8"	19"	32 1/2"	1 1/16"-12	12	3/4	12	1 1/16"-12	12	4.4 amp @ 460V AC	62915K33	00000000
		3.6	2,050	5	10	17 3/4"	19"	29 3/4"	1 1/16"-12	12	3/4	12	1 1/16"-12	12	6.8 amp @ 460V AC	62915K44	00000000
		6.3	1,800	7 1/2	20	21 3/8"	22 1/2"	37 3/8"	1 1/16"-12	12	3/4	12	1 1/16"-12	12	9.5 amp @ 460V AC	62915K36	00000000
		8.6	1,700	10	30	21 3/8"	22 1/2"	42 1/4"	1 1/16"-12	12	3/4	12	1 1/16"-12	12	12 amp @ 460V AC	62915K47	00000000
		10.4	2,100	15	30	23 3/8"	22 1/2"	44 1/8"	1 1/16"-12	12	3/4	12	1 1/16"-12	12	18.1 amp @ 460V AC	62915K48	000000000

Slim-Shaft Hydraulic Power Units


	Replacement Hydraulic Tanks

Mount these units to an existing machine or where space is limited. They create and supply hydraulic pressure where standard models won’t fit. Choose a unit with a tank capacity about three times greater than your requirement to allow for heat dissipation.

	Hydraulic Power Units														Replacement Hydraulic Tanks
					Overall			Inlet Connection — NPT		Outlet Connection — NPT
	Max. Flow Rate, gpm	Max. Pressure, psi	Power, hp	Cap., gal.	Lg.	Wd.	Ht.	Pipe Size	Dash Size	Pipe Size	Dash Size	Full Load Current @ Voltage		Each		Each
120V AC/240V AC, Single Phase



		1	2,500	2	2.3	36 1/8"	8 1/8"	8 5/8"	1/4	04	3/8	06	10 amp @ 240V AC	3973K41	000000000	3973K415	0000000


		1.5	2,500	2	2.3	34 7/8"	8 1/8"	8 5/8"	1/4	04	3/8	06	10 amp @ 240V AC	3973K42	00000000	3973K415	000000

Jack Pumps


Manual Style 1	Manual Style 2	Manual Style 3

Air Powered Style 4	Air Powered Style 5	Air Powered Style 6

Electric Style 7	Electric Style 8

NEMA

5-20

Connect these pumps to a ram to create a hydraulic jack. Use hose to connect; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.

Warning: Never use to support people or loads over people.

Style 1—To use Style 1 pumps vertically, point the pump head (where the handle meets the pump) downward.

Style 2—To use Style 2 pumps vertically, point the pump head (where the handle meets the pump) downward. These pumps are made of aluminum, making them lighter and more corrosion resistant than steel and iron pumps.

Style 3—Style 3 pumps are also known as trailer pumps and have a body that is taller than it is long to fit in a narrow space. Use as part of a permanent lifting system.

Styles 4-6—Styles 4, 5, and 6 pumps use air power to operate where electricity is not available and require minimal effort. Use the pedal with your hand or foot to activate and release your ram.

Styles 7 and 8—Styles 7 and 8 pumps operate from up to 10 ft. away using the included wired remote.

2 Speeds—Pumps with two-speeds are quick to pump until the load is engaged, then pump more slowly for precise positioning.

					Pump								Mounting			Electrical
	Style	Working Orientation	Pump Oil Cap., cu. in.	No. of Speeds	Lg.	Wd.	Ht.	Max. Pressure, psi	Pipe Size	Thread Type	Gender	Pump Material	Fasteners Included	No. of Holes	Hole Dia.	Connection	No. of Blades	Plug Connection NEMA Type	Includes		Each
Manual



		1	Horizontal, Vertical	20	2	14 1/4"	5"	5 1/8"	10,000	3/8	NPTF	Female	Steel	No	2	1/4"	—	—	—	—	2992T13	0000000


		1	Horizontal, Vertical	45	1	24 7/8"	5 3/8"	5 3/4"	10,000	3/8	NPTF	Female	Steel	—	—	—	—	—	—	—	2992T15	000000
		1	Horizontal, Vertical	45	2	25 5/8"	5 3/8"	5 3/4"	10,000	3/8	NPTF	Female	Steel	—	—	—	—	—	—	—	2992T17	000000
		1	Horizontal, Vertical	145	2	23"	5 1/2"	6 5/8"	10,000	3/8	NPTF	Female	Steel	No	4	7/16"	—	—	—	—	2992T73	000000
		2	Horizontal, Vertical	20	1	13 1/4"	3 3/4"	5 5/8"	10,000	1/4	NPTF	Female	Aluminum	No	2	1/4"	—	—	—	—	2942T8	000000
		2	Horizontal, Vertical	20	2	13 1/4"	3 3/4"	5 5/8"	10,000	1/4	NPTF	Female	Aluminum	No	2	1/4"	—	—	—	—	2942T9	000000
		2	Horizontal, Vertical	55	2	21"	4 3/4"	7"	10,000	3/8	NPTF	Female	Aluminum	—	—	—	—	—	—	—	2942T2	000000
		2	Horizontal, Vertical	155	2	21 3/4"	7 1/8"	9"	10,000	3/8	NPTF	Female	Aluminum	No	2	3/8"	—	—	—	—	2942T3	00000000
		3	Vertical	148	1	8"	8"	11 1/8"	3,000	3/8	NPTF	Female	Cast Iron	No	4	9/16"	—	—	—	—	42985K78	00000000
		3	Vertical	148	1	8"	8"	11 1/8"	6,500	3/8	NPTF	Female	Cast Iron	No	4	9/16"	—	—	—	—	42985K74	00000000
		3	Vertical	148	1	8"	8"	11 1/8"	12,000	3/8	NPTF	Female	Cast Iron	No	4	9/16"	—	—	—	—	42985K77	00000000


		Air Powered



				4	Horizontal	36	1	14 3/4"	5 5/8"	5 3/4"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	5/16"	—	—	—	—	29215T12	00000000


				5	Horizontal	90	1	10 5/8"	5 3/4"	8 1/8"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	3/8"	—	—	—	—	29215T37	000000
				6	Horizontal	127	1	13 5/8"	6 1/2"	8 3/8"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	3/16"	—	—	—	—	29215T13	00000000


				Electric



						7	Vertical	116	2	9 5/8"	9 5/8"	14 1/4"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	3/8"	Straight Blade	3	—	Remote Control with 10-ft. Cord	28945T31	00000000


						8	Vertical	590	2	11 1/2"	9 1/2"	19 5/8"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	1/2"	—	—	5-20	Remote Control with 10-ft. Cord	2920T17	00000000

Air to Hydraulic Power Units

Power a hydraulic cylinder from your air system to avoid the setup, cost, and mess of hydraulic fluid. These converters give you more consistent power than using air power for an air cylinder. However, because air works at a lower pressure than hydraulic fluid, your hydraulic cylinder won’t move loads at its full force. Attach these converters to an air line with a speed controller and solenoid (not included).

Note: These converters are not for use near fire.

	Oil Displacement, mm						Overall, mm		Inlet Connection—BSPT		Outlet Connection—BSPT		Drain Connection—BSPT		Mounting Holes
	Max.	Increments	For Max. Hydraulic Cylinder Stroke Lg., mm	Max. Flow Rate, gpm	Max. Pressure, psi	Cap., gal.	Wd.	Ht.	Pipe Size	Dash Size	Pipe Size	Dash Size	Pipe Size	Dash Size	No. of	Dia., mm	Features		Each
For 40 mm Bore Dia.



		50	50	60	3.3	100	0.02	107	213	1/4	06	1/4	06	—	—	4	7	Drain Plug	6476N11	000000


		100	50	120	3.3	100	0.03	107	263	1/4	06	1/4	06	—	—	4	7	Drain Plug	6476N12	00000
		150	50	180	3.3	100	0.05	107	313	1/4	06	1/4	06	—	—	4	7	Drain Plug	6476N13	00000
		200	50	250	3.3	100	0.07	107	363	1/4	06	1/4	06	—	—	4	7	Drain Plug	6476N14	00000


		For 63 mm Bore Dia.



				50	50	150	7.9	100	0.04	104	228	3/8	06	3/4	12	1/4	06	4	11	Drain Plug	6476N15	00000


				100	50	300	7.9	100	0.08	104	278	3/8	06	3/4	12	1/4	06	4	11	Drain Plug	6476N16	000000
				200	50	600	7.9	100	0.16	104	378	3/8	06	3/4	12	1/4	06	4	11	Drain Plug	6476N17	000000
				300	50	890	7.9	100	0.24	104	503	3/8	06	3/4	12	1/4	06	4	11	Drain Plug	6476N18	000000

Hydraulic Motors

Power equipment with hydraulic motors when electric motors can't be used for safety reasons and air-powered motors aren't powerful enough. These produce rotary power at about the same speed as air-powered motors, but with much greater torque. UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.

							Connection					Shaft
	Fixed Displacement Rate, in³/rev	Torque @ Max. Pressure, in·lbf	Speed @ Max. Pressure, rpm	Max. Pressure, psi	Max. Flow Rate, gpm	Power, hp	Port	Thread Type	Thread Size	Dash Size	Overall Lg.	Dia.	Lg.	For Min. Viscosity, SSU		Each
Clockwise, Counterclockwise



		3	675	623	1,800	9	6 5/8	Inlet/Outlet	UN/UNF (SAE Straight)	7/8"-14	10	7 1/4"	1"	1 1/2"	50	6299K51	0000000


		6	1,347	430	1,800	12	9 1/8	Inlet/Outlet	UN/UNF (SAE Straight)	7/8"-14	10	7 1/2"	1"	1 1/2"	50	6299K52	000000
		8	1,842	327	1,800	12	9 1/2	Inlet/Outlet	UN/UNF (SAE Straight)	7/8"-14	10	7 7/8"	1"	1 1/2"	50	6299K53	000000
		10	2,317	257	1,800	12	9 3/8	Inlet/Outlet	UN/UNF (SAE Straight)	7/8"-14	10	8"	1"	1 1/2"	50	6299K54	000000
		17.9	3,141	147	1,400	12	7 1/4	Inlet/Outlet	UN/UNF (SAE Straight)	7/8"-14	10	9"	1"	1 1/2"	50	6299K55	000000
		24	3,541	111	1,200	12	6 1/8	Inlet/Outlet	UN/UNF (SAE Straight)	7/8"-14	10	9 7/8"	1"	1 1/2"	50	6299K56	000000

Rotary Hydraulic Actuators


Roller Bearing	Ball Bearing

Turn heavy loads to open tank doors, pivot conveyors, or lift wheelchair ramps. These actuators have internal rack-and-pinion gears that create high torque. You can adjust the shaft rotation by as much as 30°.

			Overall			Shaft			Inlet/Outlet Connection
	Bore Size	Max. Torque, in·lbf	Ht.	Lg.	Body Material	Dia.	Lg.	Ctr.-to-Base Lg.	Pipe Size	Thread Size	Thread Type	Gender	Bearing Type		Each
90° Shaft Rotation



		7/8"	1,800	3.6"	8.75"	Steel	7/8"	1 5/16"	1.8"	—	9/16"-18	UNF	Female	Roller	6019N22	000000000


		1"	395	3"	7.95"	Aluminum	1/2"	7/8"	1.5"	1/8	—	NPT	Female	Ball	6019N11	00000000
		1 1/2"	1,180	4.3"	10.89"	Aluminum	7/8"	1 7/8"	2.2"	1/4	—	NPT	Female	Ball	6019N12	00000000
		1 1/2"	7,500	5.3"	12.39"	Steel	1 1/4"	1 7/8"	2.6"	—	9/16"-18	UNF	Female	Roller	6019N23	00000000
		1 1/2"	10,000	6"	13.64"	Steel	1 3/4"	2 5/8"	3"	—	9/16"-18	UNF	Female	Roller	6019N24	00000000
		2"	2,830	5"	13.45"	Aluminum	1 1/8"	1 7/8"	2.5"	1/4	—	NPT	Female	Ball	6019N13	00000000
		2 1/2"	4,295	6"	14.83"	Aluminum	1 3/8"	2 1/4"	3"	1/4	—	NPT	Female	Ball	6019N14	00000000
		3 1/4"	11,407	8"	19.61"	Aluminum	1 3/4"	3 1/2"	4"	3/8	—	NPT	Female	Ball	6019N15	00000000


		180° Shaft Rotation



				7/8"	1,800	3.6"	10.63"	Steel	7/8"	1 5/16"	1.8"	—	9/16"-18	UNF	Female	Roller	6019N25	00000000


				1"	395	3"	9.51"	Aluminum	1/2"	7/8"	1.5"	1/8	—	NPT	Female	Ball	6019N16	00000000
				1 1/2"	1,180	4.3"	12.95"	Aluminum	7/8"	1 7/8"	2.2"	1/4	—	NPT	Female	Ball	6019N17	00000000
				1 1/2"	7,500	5.3"	15.39"	Steel	1 1/4"	1 7/8"	2.6"	—	9/16"-18	UNF	Female	Roller	6019N26	00000000
				1 1/2"	10,000	6"	16.89"	Steel	1 3/4"	2 5/8"	3"	—	9/16"-18	UNF	Female	Roller	6019N27	00000000
				2"	2,830	5"	16.32"	Aluminum	1 1/8"	1 7/8"	2.5"	1/4	—	NPT	Female	Ball	6019N18	00000000
				2 1/2"	4,295	6"	17.76"	Aluminum	1 3/8"	2 1/4"	3"	1/4	—	NPT	Female	Ball	6019N19	00000000
				3 1/4"	11,407	8"	24.11"	Aluminum	1 3/4"	3 1/2"	4"	3/8	—	NPT	Female	Ball	6019N21	00000000