Hydraulic Ram Mounting Plates

Filter by

Stroke Length

Bore Diameter

Maximum Push Force

Material

Extended Length

Thread Size

Diameter

Rod End Type

Rod Diameter

Overall Width

Retracted Length

Pin Diameter

Width

Mounting Hole Center-to-Center

Rod Thread Size

Maximum Pressure

Shank Thread Size

Body Material

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Not Compliant

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Hydraulic Cylinder Mounting Pattern

Body Length

Maximum Pull Force

87 Products

Hydraulic Jack Mounting Plates

Thread one of these plates onto your ram to mount it at the point of use.

For Ram		Mounting Plate					Mounting
Wt. Cap.	Collar Thread Size	Lg.	Wd.	Thk.	Max. Pressure, psi	Material	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.		Each
5 ton/10,000 lb.	1 1/2"-16	3"	3"	1"	10,000	Iron	No	4	5/16"	2 1/8"	2983T27	0000000
10 ton/20,000 lb.	2 1/4"-14	3 1/2"	3 1/2"	1"	10,000	Iron	No	4	5/16"	2 5/8"	2983T57	000000

Hydraulic Cylinder Flat-Shoulder Rod Ends


Rod End Installed on Hydraulic Cylinder

Create a bend or pivot at the end of a hydraulic cylinder. These rod ends meet common NFPA and JIC mounting patterns, so they're easy to swap out.

	ID	Thread Size	Lg.	Wd.	Ht.	Gender	For Hydraulic Cylinder Mounting Pattern		Each
Steel



	7/16"	1/2"	7/16"-20	2"	1"	3/4"	Female	NFPA Light Duty, NFPA/JIC Heavy Duty	6466N11	000000


	3/4"	3/4"	3/4"-16	2 13/16"	1 1/2"	1 1/4"	Female	NFPA Light Duty, NFPA/JIC Heavy Duty	6466N12	00000
	1"	1"	1"-14	3 13/16"	2"	1 1/2"	Female	NFPA Light Duty, NFPA/JIC Heavy Duty	6466N13	00000
	1 1/4"	1 3/8"	1 1/4"-12	4 13/16"	2 3/4"	2"	Female	NFPA Light Duty, NFPA/JIC Heavy Duty	6466N14	00000

Hydraulic Cylinder Front/Rear Flanges


Front/Rear Flange

These flanges can mount on either end of the hydraulic cylinder. Use them to connect a cylinder to another part of the hydraulic system.

						Inside Mounting Hole		Outside Mounting Hole
	For Bore Dia.	Wd.	Ht.	Thk.	For Rod Gland Dia.	Dia.	Ctr.-to-Ctr.	Dia.	Ctr.-to-Ctr.	Mounting Fasteners Included	For Hydraulic Cylinder Mounting Pattern		Each
Steel



		1 1/2"	4 1/4"	2 1/2"	3/8"	7/8"	3/8"	1 5/8"	7/16"	3 7/16"	Yes	NFPA/JIC Heavy Duty	62205K145	0000000


		2"	5 1/8"	3"	5/8"	1 3/8"	1/2"	2 1/16"	9/16"	4 1/8"	Yes	NFPA/JIC Heavy Duty	62205K571	000000
		2 1/2"	5 5/8"	3 1/2"	5/8"	1 3/8"	1/2"	2 9/16"	9/16"	4 5/8"	Yes	NFPA/JIC Heavy Duty	62205K136	000000
		3 1/4"	7 1/8"	4 1/2"	3/4"	1 15/16"	5/8"	3 1/4"	11/16"	5 7/8"	Yes	NFPA/JIC Heavy Duty	62205K146	000000
		4"	7 5/8"	5"	7/8"	2 7/16"	5/8"	3 13/16"	11/16"	6 3/8"	Yes	NFPA/JIC Heavy Duty	62205K156	000000

Hydraulic Cylinders


Clevis Brackets with Clevis Pin	Front/Rear Flange	Clevis Rod Ends


Clevis Pin	Hydraulic Cylinder

Pivot Bracket	NFPA and JIC Mounting Pattern

For easy interchangeability, the mounting footprint of these cylinders meets NFPA and JIC (Joint Industrial Congress) industry standards. All have two hydraulic ports: one to extend the piston rod and another to retract it.

Adjustable Cushion—Those with an adjustable cushion reduce shock to internal components and lessen machine noise.

No Cushion—Cylinders with no cushion have a compact size.

							Rod		O'all		Mounting Hole		Inlet/Outlet Connection
	Stroke Lg.	Body Lg.	Max. Push Force, lbf	Max. Pull Force, lbf	Retracted Lg.	Extended Lg.	Thread Size	Dia.	Wd.	Ht.	Ctr.-to-Ctr.	Thread Size	Pipe Size	Dash Size	Thread Type	Body Material	Max. Pressure, psi	Cylinder Cushion Type		Each
NFPA/JIC Heavy Duty Mounting Pattern







				1 1/2" Diameter Bore

				1"	6"	4,420	3,650	7 3/8"	8 3/8"	7/16"-20	5/8"	2 1/2"	2 1/2"	1 5/8"	3/8"-24	1/2	08	NPT	Steel	2,500	None	62205K575	0000000


				2"	7"	4,420	3,650	8 3/8"	10 3/8"	7/16"-20	5/8"	2 1/2"	2 1/2"	1 5/8"	3/8"-24	1/2	08	NPT	Steel	2,500	None	62205K592	000000
				3"	8"	4,420	3,650	9 3/8"	12 3/8"	7/16"-20	5/8"	2 1/2"	2 1/2"	1 5/8"	3/8"-24	1/2	08	NPT	Steel	2,500	None	62205K603	000000
				4"	9"	4,420	3,650	10 3/8"	14 3/4"	7/16"-20	5/8"	2 1/2"	2 1/2"	1 5/8"	3/8"-24	1/2	08	NPT	Steel	2,500	Adjustable	62205K691	000000
				5"	10"	4,420	3,650	11 3/8"	16 3/8"	7/16"-20	5/8"	2 1/2"	2 1/2"	1 5/8"	3/8"-24	1/2	08	NPT	Steel	2,500	Adjustable	62205K979	000000




						2" Diameter Bore

						1"	6 1/4"	7,850	5,900	8 1/8"	9 1/8"	3/4"-16	1"	3"	3"	2 1/16"	1/2"-20	1/2	08	NPT	Steel	2,500	None	62205K131	000000


						2"	7 1/4"	7,850	5,900	9 1/8"	11 1/8"	3/4"-16	1"	3"	3"	2 1/16"	1/2"-20	1/2	08	NPT	Steel	2,500	None	62205K132	000000
						3"	8 1/4"	7,850	5,900	10 1/8"	13 1/8"	3/4"-16	1"	3"	3"	2 1/16"	1/2"-20	1/2	08	NPT	Steel	2,500	None	62205K133	000000
						4"	9 1/4"	7,850	5,900	11 1/8"	15 1/8"	3/4"-16	1"	3"	3"	2 1/16"	1/2"-20	1/2	08	NPT	Steel	2,500	Adjustable	62205K134	000000
						5"	10 1/4"	7,850	5,900	12 1/8"	17 1/8"	3/4"-16	1"	3"	3"	2 1/16"	1/2"-20	1/2	08	NPT	Steel	2,500	Adjustable	62205K135	000000




								2 1/2" Diameter Bore

								1"	6 3/8"	12,270	10,320	8 1/4"	9 1/4"	3/4"-16	1"	3 1/2"	3 1/2"	2 9/16"	1/2"-20	1/2	08	NPT	Steel	2,500	None	62205K151	000000


								2"	7 3/8"	12,270	10,320	9 1/4"	11 1/4"	3/4"-16	1"	3 1/2"	3 1/2"	2 9/16"	1/2"-20	1/2	08	NPT	Steel	2,500	None	62205K152	000000
								3"	8 3/8"	12,270	10,320	10 1/4"	13 1/4"	3/4"-16	1"	3 1/2"	3 1/2"	2 9/16"	1/2"-20	1/2	08	NPT	Steel	2,500	None	62205K153	000000
								4"	9 3/8"	12,270	10,320	11 1/4"	15 1/4"	3/4"-16	1"	3 1/2"	3 1/2"	2 9/16"	1/2"-20	1/2	08	NPT	Steel	2,500	Adjustable	62205K154	00000000
								5"	10 3/8"	12,270	10,320	12 1/4"	17 1/4"	3/4"-16	1"	3 1/2"	3 1/2"	2 9/16"	1/2"-20	1/2	08	NPT	Steel	2,500	Adjustable	62205K155	00000000




										3 1/4" Diameter Bore

										1"	7 1/4"	20,750	17,020	9 3/4"	10 3/4"	1"-14	1 3/8"	4 1/2"	4 1/2"	3 1/4"	5/8"-16	3/4	12	NPT	Steel	2,500	None	62205K171	00000000


										2"	8 1/4"	20,750	17,020	10 3/4"	12 3/4"	1"-14	1 3/8"	4 1/2"	4 1/2"	3 1/4"	5/8"-16	3/4	12	NPT	Steel	2,500	None	62205K172	00000000
										3"	9 1/4"	20,750	17,020	11 3/4"	14 3/4"	1"-14	1 3/8"	4 1/2"	4 1/2"	3 1/4"	5/8"-16	3/4	12	NPT	Steel	2,500	None	62205K173	00000000
										4"	10 1/4"	20,750	17,020	12 3/4"	16 3/4"	1"-14	1 3/8"	4 1/2"	4 1/2"	3 1/4"	5/8"-16	3/4	12	NPT	Steel	2,500	Adjustable	62205K174	00000000
										5"	11 1/4"	20,750	17,020	13 3/4"	18 3/4"	1"-14	1 3/8"	4 1/2"	4 1/2"	3 1/4"	5/8"-16	3/4	12	NPT	Steel	2,500	Adjustable	62205K175	00000000




												4" Diameter Bore

												1"	7 5/8"	31,420	25,400	10 5/8"	11 5/8"	1 1/4"-12	1 3/4"	5"	5"	3 13/16"	5/8"-16	3/4	12	NPT	Steel	2,500	None	62205K191	00000000


2"												8 5/8"	31,420	25,400	11 5/8"	13 5/8"	1 1/4"-12	1 3/4"	5"	5"	3 13/16"	5/8"-16	3/4	12	NPT	Steel	2,500	None	62205K192	00000000
3"	9 5/8"											31,420	25,400	12 5/8"	15 5/8"	1 1/4"-12	1 3/4"	5"	5"	3 13/16"	5/8"-16	3/4	12	NPT	Steel	2,500	None	62205K193	00000000
4"	10 5/8"											31,420	25,400	13 5/8"	17 5/8"	1 1/4"-12	1 3/4"	5"	5"	3 13/16"	5/8"-16	3/4	12	NPT	Steel	2,500	Adjustable	62205K194	00000000
5"	11 5/8"											31,420	25,400	14 5/8"	19 5/8"	1 1/4"-12	1 3/4"	5"	5"	3 13/16"	5/8"-16	3/4	12	NPT	Steel	2,500	Adjustable	62205K195	00000000

Accessories for Hydraulic Cylinders

For Bore Dia.		Each
2", 2 1/2"	62205K29	000000
3 1/4"	62205K39	000000
4"	62205K49	000000

For Bore Dia.	Mounting Fasteners Included		Each
1 1/2"	No	62205K14	000000
2", 2 1/2"	No	62205K24	00000
3 1/4"	No	62205K34	000000
4"	No	62205K44	000000

For Bore Dia.		Each
2", 2 1/2"	62205K22	000000
3 1/4"	62205K32	00000
4"	62205K42	00000

Front/Rear Flanges for NFPA/JIC Heavy Duty Mounting Pattern

For Bore Dia.	Mounting Fasteners Included		Each
1 1/2"	Yes	62205K145	0000000
2"	Yes	62205K571	000000
2 1/2"	Yes	62205K136	000000
3 1/4"	Yes	62205K146	000000
4"	Yes	62205K156	000000

Clevis Brackets with Clevis Pin for NFPA/JIC Heavy Duty Mounting Pattern

For Bore Dia.	Mounting Fasteners Included		Each
1 1/2"	Yes	62205K18	0000000
2"	Yes	62205K28	000000
2 1/2"	Yes	62205K38	000000
3 1/4"	Yes	62205K48	000000
4"	Yes	62205K58	000000

For Bore Dia.		Each
1 1/2"	62205K19	000000

For Bore Dia.		Each
1 1/2"	62205K12	000000

Hydraulic Cylinder Clevis Rod Ends


Clevis Rod Ends

Connect a clevis rod end to a hydraulic cylinder to create a bend or pivot. Use these with pivot brackets and clevis pins (each component sold separately). They’re also known as yoke-end linkages.

Stainless Steel—Stainless steel clevis rod ends are more corrosion resistant than steel clevis rod ends in wet environments.

					Overall			Shank
	For Bore Dia.	For Pin Dia.	Jaw Opening Wd.	Shank Ctr. Lg.	Wd.	Lg.	Ht.	Thread Size	Gender	Threading	For Hydraulic Cylinder Mounting Pattern		Each
Steel



		1 1/2"	1/2"	3/4"	1 1/2"	1 3/4"	2"	1"	7/16"-20	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K19	000000


		2", 2 1/2"	3/4"	1 1/4"	2 3/8"	2 1/2"	3 1/8"	1 1/2"	3/4"-16	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K29	00000
		3 1/4"	1"	1 1/2"	3 1/8"	3"	4 1/8"	2"	1"-14	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K39	000000


		Iron



				4"	1 3/8"	2 1/16"	4 1/8"	4 1/16"	5 1/2"	2 3/4"	1 1/4"-12	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K49	000000


				Stainless Steel



						—	1/2"	3/4"	1 1/2"	1 3/4"	2"	1"	7/16"-20	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	6043N11	000000


						—	3/4"	1 1/4"	2 3/8"	2 1/2"	3 1/8"	1 1/2"	3/4"-16	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	6043N12	000000
						—	1"	1 1/2"	3 1/8"	3"	4 1/8"	2"	1"-14	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	6043N13	000000
						—	1 3/8"	2 1/16"	4 1/8"	4 1/16"	5 1/2"	2 3/4"	1 1/4"-12	Female	Fully Threaded	NFPA Light Duty, NFPA/JIC Heavy Duty	6043N14	00000000

Hydraulic Cylinder Pivot Brackets


	Pivot Bracket

Pivot brackets are designed to be used with clevis rod ends and clevis pins (each component sold separately). When connected to a clevis rod end, they allow a hydraulic cylinder to move in an arc. Do not mount pivot brackets directly onto the cylinder.

Stainless Steel—Stainless steel brackets resist corrosion better than steel and iron brackets, making them a good choice for wet and damp environments.

							Mounting Hole
	For Bore Dia.	For Pin Dia.	Wd.	Ht.	Dp.	Base Plate Thk.	Dia.	Ctr.-to-Ctr.	Mounting Fasteners Included	For Hydraulic Cylinder Mounting Pattern		Each
Steel



		1 1/2"	1/2"	2 1/2"	2 1/2"	1 5/8"	3/8"	13/32"	1 5/8"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K14	000000


		2", 2 1/2"	3/4"	3 1/2"	3 1/2"	2 5/8"	5/8"	17/32"	2 9/16"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K24	00000
		3 1/4"	1"	4 1/2"	4 1/2"	3 1/4"	3/4"	21/32"	3 1/4"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K34	000000


		Iron



				4"	1 3/8"	5"	5"	4 3/8"	7/8"	21/32"	3 13/16"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	62205K44	000000


				Stainless Steel



						—	1/2"	2 1/2"	2 1/2"	1 5/8"	3/8"	13/32"	1 5/8"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	5765N11	000000


						—	3/4"	3 1/2"	3 1/2"	2 5/8"	5/8"	17/32"	2 9/16"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	5765N12	000000
						—	1"	4 1/2"	4 1/2"	3 3/8"	7/8"	21/32"	3 1/4"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	5765N13	000000
						—	1 3/8"	5"	5"	4 3/8"	7/8"	21/32"	3 13/16"	No	NFPA Light Duty, NFPA/JIC Heavy Duty	5765N14	00000000

Hydraulic Cylinder Clevis Brackets


Bracket with Clevis Pin and Cotter Pins	Bracket

Image of Attribute. Front orientation. Contains Annotated. Hydraulic Cylinder Clevis Brackets.

Mount these clevis brackets directly to a hydraulic cylinder. Clevis brackets allow hydraulic cylinders to create a bend or pivot when connected to a pivot bracket.

Stainless Steel—Stainless steel brackets resist corrosion better than steel brackets, making them a good choice for wet and damp environments.

								Mounting Hole
	For Bore Dia.	Pin Dia.	Wd.	Ht.	Dp.	Jaw Opening Wd.	Base Plate Thk.	Dia.	Ctr.-to-Ctr.	Mounting Fasteners Included	For Hydraulic Cylinder Mounting Pattern	Includes		Each
Steel



		1 1/2"	1/2"	2 1/2"	2 1/2"	1 5/8"	3/4"	3/8"	3/8"	1 5/8"	Yes	NFPA/JIC Heavy Duty	Clevis Pin, Two Cotter Pins	62205K18	0000000


		2"	3/4"	3"	3"	2 5/8"	1 1/4"	5/8"	9/16"	2 1/16"	Yes	NFPA/JIC Heavy Duty	Clevis Pin, Two Cotter Pins	62205K28	000000
		2 1/2"	3/4"	3 1/2"	3 1/2"	2 5/8"	1 1/4"	5/8"	9/16"	2 9/16"	Yes	NFPA/JIC Heavy Duty	Clevis Pin, Two Cotter Pins	62205K38	000000
		3 1/4"	1"	4 1/2"	4 1/2"	3 1/4"	1 1/2"	3/4"	5/8"	3 1/4"	Yes	NFPA/JIC Heavy Duty	Clevis Pin, Two Cotter Pins	62205K48	000000
		4"	1 3/8"	5"	5"	4 3/8"	2 1/16"	7/8"	5/8"	3 13/16"	Yes	NFPA/JIC Heavy Duty	Clevis Pin, Two Cotter Pins	62205K58	000000


		Stainless Steel



				—	1/2"	3 1/2"	3 1/2"	2"	3/4"	1/2"	3/8"	2 1/2"	No	NFPA/JIC Heavy Duty	—	6020N11	000000


				—	3/4"	5"	5"	2 5/8"	1 1/4"	5/8"	1/2"	3 13/16"	No	NFPA/JIC Heavy Duty	—	6020N12	00000000
				—	1"	6 1/2"	6 1/2"	3 1/4"	1 9/16"	3/4"	5/8"	4 15/16"	No	NFPA/JIC Heavy Duty	—	6020N13	00000000
				—	1 3/8"	7 1/2"	7 1/2"	4 5/8"	2 1/16"	7/8"	5/8"	5 11/16"	No	NFPA/JIC Heavy Duty	—	6020N14	00000000

Hydraulic Cylinder Clevis Pins

Secure parts onto hydraulic cylinders. Use these pins with clevis rod ends and pivot brackets (sold separately).

17-4 PH Stainless Steel—Stainless steel pins are more corrosion resistant than steel pins in wet environments.

	Dia.	Usable Lg.	Lg.	Through-Hole Dia.	For Hydraulic Cylinder Mounting Pattern	Includes		Each
1144 Carbon Steel



	1 1/2"	1/2"	1 15/16"	2 9/32"	0.106"	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Cotter Pins	62205K12	000000


	2", 2 1/2"	3/4"	2 23/32"	3 3/32"	0.14"	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Cotter Pins	62205K22	00000
	3 1/4"	1"	3 7/32"	3 19/32"	0.14"	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Cotter Pins	62205K32	00000
	4"	1 3/8"	4 1/4"	4 21/32"	0.173"	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Cotter Pins	62205K42	00000


	17-4 PH Stainless Steel



			—	1/2"	1 7/8"	2 1/8"	—	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Retaining Rings	6033N11	000000


			—	3/4"	2 5/8"	2 7/8"	—	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Retaining Rings	6033N12	000000
			—	1"	3 1/8"	3 3/8"	—	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Retaining Rings	6033N13	000000
			—	1 3/8"	4 1/8"	4 3/8"	—	NFPA Light Duty, NFPA/JIC Heavy Duty	Two Retaining Rings	6033N14	000000

Corrosion-Resistant Hydraulic Cylinders


Clevis Brackets with Clevis Pin	Clevis Rod Ends


Clevis Pin	Pivot Bracket

Hydraulic Cylinder

Made of 303 stainless steel, these hydraulic cylinders move heavy loads without corroding in wet areas. Four tie rods protect the barrel from impact and keep the end caps secure. These cylinders are double acting, meaning they pull loads as well as push them—and do so with nearly as much force. The mounting footprint meets NFPA and JIC (Joint Industrial Congress) compatibility standards.

Because they have a magnetic piston, these cylinders can be used with tie rod-mount proximity switches (not included) to indicate piston position. All have an adjustable cushion that cuts down on shock and noise.

							Rod		O'all		Mounting Hole		Inlet/Outlet Connection
	Stroke Lg.	Body Lg.	Max. Push Force, lbf	Max. Pull Force, lbf	Retracted Lg.	Extended Lg.	Thread Size	Dia.	Wd.	Ht.	Ctr.-to-Ctr.	Dia.	Pipe Size	Dash Size	Thread Type	Body Material	Max. Pressure, psi	Cylinder Cushion Type		Each
NFPA/JIC Heavy Duty Mounting Pattern







				1 1/2" Diameter Bore

				1"	5"	700	580	6 13/16"	7 13/16"	7/16"-20	5/8"	3 3/8"	2"	2 3/4"	5/16"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N11	0000000


				2"	6"	700	580	7 13/16"	9 13/16"	7/16"-20	5/8"	3 3/8"	2"	2 3/4"	5/16"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N12	000000
				4"	8"	700	580	9 13/16"	13 13/16"	7/16"-20	5/8"	3 3/8"	2"	2 3/4"	5/16"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N13	000000
				6"	10"	700	580	11 13/16"	17 13/16"	7/16"-20	5/8"	3 3/8"	2"	2 3/4"	5/16"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N14	000000
				8"	12"	700	580	13 13/16"	21 13/16"	7/16"-20	5/8"	3 3/8"	2"	2 3/4"	5/16"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N24	000000
				12"	16"	700	580	17 13/16"	29 13/16"	7/16"-20	5/8"	3 3/8"	2"	2 3/4"	5/16"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N25	00000000




						2" Diameter Bore

						1"	5"	1,250	1,130	6 15/16"	7 15/16"	7/16"-20	5/8"	4 1/8"	2 1/2"	3 3/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N15	000000


						2"	6"	1,250	1,130	7 15/16"	9 15/16"	7/16"-20	5/8"	4 1/8"	2 1/2"	3 3/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N16	000000
						4"	8"	1,250	1,130	9 15/16"	13 15/16"	7/16"-20	5/8"	4 1/8"	2 1/2"	3 3/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N17	000000
						6"	10"	1,250	1,130	11 15/16"	17 15/16"	7/16"-20	5/8"	4 1/8"	2 1/2"	3 3/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N18	00000000
						8"	12"	1,250	1,130	13 15/16"	21 15/16"	7/16"-20	5/8"	4 1/8"	2 1/2"	3 3/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N26	00000000
						12"	16"	1,250	1,130	17 15/16"	29 15/16"	7/16"-20	5/8"	4 1/8"	2 1/2"	3 3/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N27	00000000




								2 1/2" Diameter Bore

								1"	5 1/8"	1,960	1,840	7 1/16"	8 1/16"	7/16"-20	5/8"	4 5/8"	3"	3 7/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N19	000000


								2"	6 1/8"	1,960	1,840	8 1/16"	10 1/16"	7/16"-20	5/8"	4 5/8"	3"	3 7/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N21	000000
								4"	8 1/8"	1,960	1,840	10 1/16"	14 1/16"	7/16"-20	5/8"	4 5/8"	3"	3 7/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N22	00000000
								6"	10 1/8"	1,960	1,840	12 1/16"	18 1/16"	7/16"-20	5/8"	4 5/8"	3"	3 7/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N23	00000000
								8"	12 1/8"	1,960	1,840	14 1/16"	22 1/16"	7/16"-20	5/8"	4 5/8"	3"	3 7/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N28	00000000
								12"	16 1/8"	1,960	1,840	18 1/16"	30 1/16"	7/16"-20	5/8"	4 5/8"	3"	3 7/8"	3/8"	3/8	06	NPTF	303 Stainless Steel	400	Adjustable	7053N29	00000000

Accessories for Hydraulic Cylinders