Manually pump air, water, or hydraulic fluid through your system so you can test for leaks.

Tighten these threaded fittings with your hands for a secure connection in testing, flushing, venting, and plugging applications—no tools, tape, or sealant required.

These gauges have a glycerin-filled dial to reduce needle flutter for precise readings in high-vibration applications.

All-stainless steel construction makes these gauges suitable for testing and calibrating in corrosive environments.

Gauges have an accuracy of ±0.25%.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Fine-tune the pressure range on these transmitters to account for changes in pressure readings over time.

Choose these transmitters when you need reliable pressure monitoring but not high accuracy.

Monitor and control pressure in portable HVAC systems, hydraulics, and oil and gas equipment. Unlike other pressure transmitters that measure the difference between your system and the atmosphere, these transmitters give measurements relative to zero pressure—regardless of altitude or temperature.

FM approved and CSA certified for use in hazardous locations, these transmitters monitor pressure where combustible fumes may be present.

The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.

Measure the difference in pressure between two process lines without needing to program your receiving device to correct for errors. These transmitters automatically compensate for errors caused by vibration and temperature changes.

View readings at the source with the dial indicator or remotely using a receiver—these transmitters measure the difference in pressure between two inputs in liquid applications.

With an accuracy of ±0.25%, use these transmitters in applications that require highly accurate measurement of both pressure and vacuum, such as activating vacuum pumps.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Used in hazardous locations, these transmitters safely convert pressure and vacuum into an electrical signal to measure liquids, gases, and steam. NEC rated for safety, these transmitters are explosion proof, so they can be used in environments containing flammable gases and vapors.

At least four times as accurate as standard vacuum transmitters, these transmitters sense vacuum at an accuracy of ±0.25%, making them ideal for use in laboratories and in analytical testing applications.

Unlike other gauges that measure the difference between your system and the atmosphere, these give measurements relative to zero pressure.