Switch your device on and off without needing a separate switch. These connectors work with industry standard cords often found on power supplies, appliances, and other electronic devices. Wire these connectors using the quick-disconnect terminals. They slide together with mating terminals for a secure hold that's also easy to pull apart to make repairs. The terminals are on the back of the connector, so the wiring stays inside your device.

Class I shock protection means they have insulation and a protective ground. They meet UL 94 V-0, so they self-extinguish within 10 seconds if they catch fire and won’t spread the fire by dripping. They’re also UL and C-UL recognized components, CE and ENEC marked, and CSA certified—they meet U.S., Canadian, and European safety standards.

Drill mounting holes in your device to mount screw-on connectors to housings of any thickness. Snap-in connectors secure with tabs. They do not require fasteners, but they do need a specific panel thickness on your device housing and a precisely cut hole for secure mounting.

The power switch on connectors with an indicator light illuminates when your device is on.

Shielded connectors protect against interference from nearby equipment.

Connectors for 20 mm-long fuses have a drawer to hold a fuse (sold separately), which prevents short circuits and circuit overloads from damaging your device.

For technical drawings and 3-D models, click on a part number.

Rated IP67, these connectors create a dust- and watertight seal where they fit into the housing of power supplies, appliances, and other electronic devices. Instead of hardwiring your devices, these connectors let you plug in a standard IEC power cord and turn the power on and off with a built-in switch. Wire these connectors using the quick-disconnect terminals; they slide together with matching terminals on your wiring for a secure hold that's also easy to pull apart to make repairs. The terminals are on the back of the connector, so the wiring stays inside your device.

To protect your devices, these connectors have a thermal circuit breaker that uses the excess heat when there’s overcurrent to trip the breaker and cut power. If there’s a short circuit, the breakers can safely stop up to a 2,000-Amp breakthrough current. These connectors also have Class I shock protection, so they’re insulated and have a protective ground.

These connectors meet UL 94 V-0, which means they self-extinguish within 10 seconds if they catch fire, and won’t spread the fire by dripping. They’re also UL and C-UL recognized components, and CE and ENEC marked, so they meet stringent safety standards.

For technical drawings and 3-D models, click on a part number.

Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords. Compared to using separate receptacles, these combination connectors are quicker to install and have a more streamlined appearance. Snap the connector into your panel—tabs on the side hold them in place without needing fasteners. Then solder your power supply to the wire terminals for a secure, permanent bond. C13 receptacles are also known as Sheet F outlets.

Rated IP30, these connectors prevent objects greater than 2.5mm wide, such as screwdrivers, from touching internal components and accidentally shocking you. With Class I shock protection, they’re insulated and have a protective ground.

These connectors meet UL 94 V-0, which means they self-extinguish within 10 seconds if they catch fire, and won’t spread the fire by dripping. They’re also UL recognized, CE marked, CSA certified, and ENEC marked, so you know they meet stringent safety standards.

For technical drawings and 3-D models, click on a part number.

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference). Instead of hardwiring your devices, add these connectors and plug in a standard IEC power cord. Wire these connectors using the quick-disconnect terminals; they slide together with matching terminals on your wiring for a secure hold that's also easy to pull apart to make repairs. The terminals are on the back of the connector, so the wiring stays inside your device. For the best EMI-filtering performance, choose a connector with a current rating at or slightly above your device's current requirements.

Rated IP40, these connectors prevent objects larger than a 1 mm-wd. wire from touching internal components and accidentally shocking you. With Class I shock protection, they’re insulated and have a protective ground. Some have a fuse drawer to hold a fuse, which prevents short circuits and circuit overloads from damaging your device. The fuses are sold separately.

These connectors meet UL 94 V-0, which means they self-extinguish within 10 seconds if they catch fire, and won’t spread the fire by dripping. They’re also UL and C-UL recognized components, ENEC marked, and CSA certified, so they meet stringent safety standards.

Screw-on connectors mount to housings of any thickness, as long as you can drill mounting holes into them. Snap-in connectors have tabs on the side to mount to housings without using fasteners. But, they require a specific panel thickness and precisely cut hole for secure mounting.

Connectors with an indicator light on their switch show if your device is powered on.

Shielded connectors protect against interference from nearby equipment.

For technical drawings and 3-D models, click on a part number.

Bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI). All of these connectors are compatible with standard IEC power cords. Often used to convey power from wall outlets, there’s no need to wire your devices to an external power source. Instead, wire these connectors into your device with the terminals on the back of each connector. When selecting a connector, make sure the current is at or slightly above the requirements of your device for the best EMI-filtering performance.

All of these connectors meet U.S. and international standards for safety. They also meet UL 94 V-0, which means they self-extinguish within 10 seconds if they catch fire, and won’t spread the fire by dripping. Rated IP40, these connectors prevent objects larger than 1 mm, such as wire, from making contact with a live circuit and shocking you. They also include shock protection. Class I shock protection means they're insulated and have a protective ground to prevent electrical shocks. Class II shock protection means there are two levels of insulation to prevent electrical shocks.

Screw-on connectors mount to devices with any panel thickness, as long as you can drill mounting holes into the device. Snap-in connectors mount to devices with snap-in tabs—no fasteners needed—but require a specific panel thickness and a precisely cut hole for secure mounting.

Solder terminal wire connections are more secure than quick-disconnect terminal connections. Quick-disconnect terminal wire connections are faster to wire than solder terminal connections. The terminals slide together with the quick-disconnect terminals on your wiring and are easily disconnected by hand, but still provide a strong hold.

For technical drawings and 3-D models, click on a part number.

Power electronics in damp environments while protecting them from electromagnetic interference. The filter on these connectors reduces electromagnetic interference, which could damage components and cause your electronics to behave erratically. These connectors pair with industry standard cords often found on electronic devices. Wire them using the quick-disconnect terminals, which slide together with matching terminals on your device for a secure fit that can still be pulled apart by hand and removed for repairs. The terminals are on the back of the connector, so the wiring stays inside your device.

Class I shock protection means these connectors have insulation and a protective ground. They meet UL 94 V-0, so they self-extinguish within 10 seconds if they catch fire and won’t spread the fire by dripping. They’re also UL and C-UL recognized components, CE and ENEC marked—they meet U.S., Canadian, and European safety standards. They are rated IP65 for protection from dust and rinsing.

When selecting a connector, make sure the current is at or slightly above the requirements of your device for the best EMI-filtering performance. These connectors require fuses (sold separately) to prevent short circuits and circuit overloads from damaging your devices.

For technical drawings and 3-D models, click on a part number.