Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.

Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds.

These lights fit into ceiling cutouts.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Also known as pendant lights, these fixtures hang from a cord.

Also known as turret lights, these fixtures have downlight reflectors to direct light.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Mount lights in recessed spaces so the lens is flush with the wall.

Suspend or mount with fasteners to the ceiling.

These LED lights have an air-tight seal to protect against contaminants.

Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.

Hang these lights where you need them on the job site.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power.

Attach these tiny flashlights to a grease gun nozzle or air hose to shine light directly onto your work.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

Shine light into hard-to-reach spaces with these flexible-arm flashlights.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free.

Extend light into hard-to-reach spaces by attaching a fiber-optic cable to your flashlight.

Similar to a holster without the bulk, belt loops hold your flashlight when not in use.

Convert incandescent, halogen, krypton, and xenon Maglite flashlights into LED flashlights to produce more light and consume less battery power.

Because these flashlights are buoyant, they're easy to recover when dropped in the water.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

Rated for use in environments where hazardous material is present.

Gently bend these single-use lightsticks to activate.

Safe for use in environments where hazardous material is present.

Turn a mini flashlight into a headlamp with these straps.

Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Hardwire these lights to a power source.

Also known as wall packs, these lights mount to exterior walls and ceilings.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

Change the color of a room; filters allow only the same color lightwave to pass through.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

Suspend these lights overhead or mount them above your workspace.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

Mount add-on heads in remote areas to extend emergency lighting.

No need for wiring—these lights plug-in with a two-prong plug.

Also known as Coddington magnifiers, these have grooved lens for an extremely clear view.

Two LED bulbs illuminate your work.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

Textured surfaces and irregularities are more visible.

Lock the adjustable arm into position to maintain a steady view even near vibrating machinery.

Use where electrostatic discharge is a concern.

These microscopes come with a 1.3 megapixel camera that has a USB port for interfacing with your computer.

Reposition these microscopes without moving the base. The head rotates 360°.

Illuminate your sample from above, below, or both—these microscopes have an upper and lower light that you can turn on together or separately.

Slide the switch to adjust magnification.

These lights have two UV bulbs and two fluorescent bulbs that work independently of each other.

The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting.