Connect these powerful tools to your shop air. They hammer as they rotate to drive screws quickly, even through thick or dense material.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

The small-diameter shaft can access screws in narrow recessed holes.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

The slightly tapered tip wedges into the screw recess for a secure hold. Also known as Torx-Align bits.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

When you don't have exact alignment between the fastener and the bit, the ball end allows angled entry to turn screws in hard-to-reach areas. A retaining ring grips inside the recess to hold screws in place.

A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.

The six rounded points fit the star-shaped recess of Torx-Plus screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

An opening at the tip accommodates the pin in the recess of tamper-resistant pentalobe and tamper-resistant Torx Plus screws.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

Use with screws that have two drilled holes.

Strong and durable, these multipurpose bits are for use with bit screwdrivers.

Also known as Polydrive bits.

Also known as Reed and Prince bits.

These bits have an offset cross shape. They’re also known as ACR® bits.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

An opening at the tip accommodates the pin in the recess of tamper-resistant Phillips screws. These are also known as pin-in-head Phillips bits.

An exterior stop collar prevents fasteners from being driven too deep. Use with soft materials such as drywall, wood, and fiberboard.

A three-winged tip fits triangular slotted screw recesses.

Turn the screws found in Apple devices.

Because they make contact on the flat sides of fasteners rather than only on the corners, these magnetic bits significantly reduce slipping and stripping. They’re also known as lobular bits.

Turn hex nuts and cap screws.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

These bits are also known as nut setters.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

The slightly tapered tip wedges into the screw recess for a secure hold. These are also known as Torx-Align bits.

Designed for the fasteners used in electronics assembly, the tip of these bits has slightly sharper corners than Phillips style.

Grip the indentations on the head of tri-groove fasteners.

Use with screws that have two drilled holes.

Also known as Robertson bits these are designed for screws with a square recess in the head.

These adapters are designed to withstand the high torque of impact drivers. They hold hex-shank bits (also known as insert bits).

Use these wrenches for medium-volume production, general maintenance, and construction applications.

Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.