Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. Lights are sealed to keep out humidity and dripping, splashing, and falling liquids.

Lights without bulbs work with medium (standard household) screw-in base LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a tempered glass lens are more impact resistant than those with a glass lens.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

No need for wiring—these lights plug-in with a three-prong plug. Use these fixtures to illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to any angle to direct light where needed. Lights work with LED, CFL, halogen, and incandescent bulbs (sold separately). They cannot be sold to California due to local energy efficiency requirements.

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Style B work with LED, CFL, halogen, and incandescent bulbs (sold separately). Lights with a zinc housing are more impact resistant than those with an aluminum housing.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style B detect motion up to 70 feet away. They are compatible with LED, CFL, halogen, and incandescent bulbs (sold separately).

These lights are UL listed for Class I, Division 2, Groups A, B, C, and D, and Class II, Division 2, Groups F and G for use in environments where ignitable concentrations of hazardous material occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. They withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts. Lights can be hardwired to operate on any of the voltages listed. They have a low-voltage disconnect so they won’t drain the backup battery. Use the test switch to check that the heads and battery are working properly. Heads adjust to any angle to direct light where needed. They cannot be sold to California, Vermont, or Oregon due to energy efficiency requirements.