Also known as pendant lights, these fixtures hang from a cord.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement.

These lights fit into ceiling cutouts.

Fit traditional fluorescent ceiling strip lights with LED lights, which use less electricity.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Brighten high-traffic areas with our most rugged ceiling lights. Rated IK10, the highest impact resistance rating, they’re protected by a 16-gauge cold-rolled steel frame and polycarbonate lens.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets.

Maximize the light that reaches your shelving. Often used in storage rooms and warehouse rack rows, these lights have reflectors that direct all light downwards from ceilings up to 24 ft. high.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Install sockets for medium (standard household) screw-in base light bulbs.

Often used in stairwells and hallways, these lights save energy by only turning on when they sense movement.

Illuminate steps to reduce the risk of tripping or falling, especially at night or in poorly lit areas.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Built for hot, hazardous areas such as steel mills and refineries, these lights work in temperatures up to 212° F. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

A sealed lens keeps moisture out to protect these lights against washdowns.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust.

Brighten your ISO Class 3 clean room with long rows of lights—you can wire these lights together at the ends. They have an airtight seal that keeps contaminants from entering your space.

To keep contaminants from entering your clean room, these lights seal against drop ceilings with an airtight gasket.

A mounting clip at the base lets you attach these lights to nearby surfaces.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working.

Point light where it’s needed—even in wet areas. These lights are sealed against splashing and dripping water.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers.

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids.

Brighten remote areas using the same battery as your other cordless Milwaukee tools.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

Also known as wall packs, these lights mount to exterior walls and ceilings.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Hardwire these lights to a power source.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

These lights swing out from the wall to illuminate loading docks and trailers.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

If the power goes out, you’ll find these flashlights right away.

Always have a flashlight on hand—these attach to a key ring.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free.

Light up objects more than a quarter of a mile away. These flashlights are also known as searchlights.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

All of these flashlights stand up to wet environments.

Safely light up work in explosion-prone areas. Rated NEC Class I, these flashlights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Similar to a holster without the bulk, belt loops hold your flashlight when not in use.

Convert incandescent, halogen, krypton, and xenon Maglite flashlights into LED flashlights to produce more light and consume less battery power.

Gently bend these single-use lightsticks to activate.

Keep your hands free by wearing a flashlight on your head.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.

Illuminate your electronics cabinets and racks with long-lasting LED lights.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

Connect the battery pack to your existing fluorescent light to convert it into an emergency backup light.

Mount add-on heads in remote areas to extend emergency lighting.