1"-14 Inserts | McMaster-Carr

Filter by

System of Measurement

Thread Size

Threaded Insert Type

Thread Direction

Helical Insert Type

For Tap Thread Size

Material

Installed Length

Profile

Thread Type

For Tap Type

For Use With

Screw-Locking Helical Inserts

For Use In

Pin Diameter

Manufacturer

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Insert Tool Thread Type

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Military Specification

Thread Spacing

End Type

Mount Type

40 Products

Helical Threaded Insert Removal Tools

To remove installed helical inserts, place the tip of these tools into the insert and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.

Narrow Profile—The tip of these tools has a narrower angle than standard removal tools to reduce the chance it will dig into your material’s surface when you strike the tool.

	Mfr.		Each
Standard Profile



	6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-12, 1"-14, M4, M5, M6, M7, M8, M9, M10, M12, M13, M14, M15, M16, M18, M20, M22, M24	—	90254A113	000000


	Narrow Profile



			7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 1/2"-28, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 5/8"-24, 3/4"-10, 3/4"-16, 3/4"-20, 7/8"-9, 7/8"-14, 7/8"-20, 1"-8, 1"-12, 1"-14, M12, M14, M16, M18, M20, M22, M24	Heli-Coil	90254A330	00000

Thread-In Quick-Release Pin Receptacles

Use a screwdriver to install these receptacles in a threaded hole. Use them to secure quick-release pins when you can't drill a through hole. They're made of 18-8 stainless steel for a balance of strength and corrosion resistance, and passivated for added protection against corrosion and oxidation.

	Barrel OD	Overall Lg.	Usable Lg. Reduction	Thread Size	Material	Passivation		Each
Round Mounting Flange



	5/8"	1"	15/16"	1/4"	1"-14	18-8 Stainless Steel	Passivated	94715A301	000000

Installation Bits for Slotted-Drive Threaded Inserts

For fast installation, use these installation bits with power drills and drill presses.

For Thread Size	Hex Shank Size		Each
1"-8, 1"-14	3/8"	94110A240	000000

Thread-Locking Threaded Insert Assortments

These assortments include various sizes of thread-locking inserts, which won’t back out or loosen from vibration. Also known as E-Z Lok, they come with Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours. After drilling and tapping your hole, install inserts with a wrench or use an installation bit (not included). To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole.

Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.

Black Phosphate-Coated Steel—These inserts resist occasional moisture.

	For Tap Thread Size	Drill Bit Size	For Maximum Hole Diameter	Drive Style		Each
Standard Wall







	Black Phosphate-Coated Steel

	22	1"-14 Thread × 1 1/4" Installed Lg. (2 Each) 1/2"-20 Thread × 0.656" Installed Lg. (6 Each) 3/4"-16 Thread × 0.781" Installed Lg. (7 Each) 5/8"-18 Thread × 0.688" Installed Lg. (7 Each)	Fine	3/4"-10 7/8"-9 1"-8 1 3/8"-12	21/32" 49/64" 7/8" 1 9/32"	21/32" 49/64" 7/8" 1 9/32"	Slotted	90248A115	000000

Key-Locking Threaded Insert Drivers

Place the tip of these tools into a key-locking insert after you've threaded it into a hole with your fingers. Then, strike these tools with a hammer to drive the keys into the material and secure the insert. They’re compatible with Keensert inserts.

Choose the tool that matches your insert’s thread size and tap thread size.

		Each
Standard (UN) Thread







	For Thick-Wall Inserts

	1"-8, 1"-12, 1"-14	1 3/8"-12	Straight	92100A744	000000

Helical Threaded Inserts

Pronged

Restore, reinforce, or create threads in metal. The tough coils on these inserts expand once installed to anchor in a tapped hole. Also known as Heli-Coil inserts, they're often used in engine heads and machinery housings where strong connections are critical. Unlike threadlocking inserts, you can remove and reuse them without them losing their strength.

Installation requires a drill bit, a helical insert tap, and an installation tool.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	Inserts								Through-Hole Taps		Closed-End Hole Taps		Installation Tools		Inserts with Installation Tools
	Thread Size	Installed Lg.	Drill Bit Size	For Max. Hole Dia.	Specs. Met	Pkg. Qty.		Pkg.		Each		Each		Each	No. of Inserts Included		Each
Pronged







				18-8 Stainless Steel

				1"-14	1"	1 1/32"	1.031"	MS124665	1	91732A025	00000	91709A071	0000000	91709A494	0000000	90261A177	0000000	—	———	0


				1"-14	1.500"	1 1/32"	1.031"	MS124705	1	91732A027	0000	91709A071	000000	91709A494	000000	90261A177	000000	6	91732A121	0000000

Extraction Tools

Remove installed helical inserts.

For Pronged Helical Inserts—Place the tip into pronged inserts and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.

		Each
For Pronged Helical Inserts



	7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 1/2"-28, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 5/8"-24, 3/4"-10, 3/4"-16, 3/4"-20, 7/8"-9, 7/8"-14, 7/8"-20, 1"-8, 1"-12, 1"-14, M12, M14, M16, M18, M20, M22, M24	90254A330	000000

Steel Socket Nuts

Also known as Allen nuts, use these with socket head cap screws in recessed holes and tight spaces that don't have enough clearance for a wrench. Tighten them with a 6-point hex key. They can also be used as an insert by pressing or drawing them into nonhardened steel, cast iron, or soft nonferrous metal or by molding them into plastic, ceramic, fiber, and similar materials. Made from alloy steel, they're comparable in strength to Grade 9 bolts.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	OD	Ht.	Threading	Thread Dp.	For Hole Dia.	Hex Key Size		Each
Alloy Steel



	1"-14	1.53"	1.52"	Partially Threaded	0.81"	1.606"	1"	92067A038	000000

Thread-Locking Threaded Inserts

With Loctite® adhesive already on the threads, these inserts won’t back out or vibrate loose. The adhesive reaches full strength after 72 hours. Unlike helical inserts, you can install them with a standard drill and tap. However, thread-locking inserts are difficult to remove and reuse.

After drilling and tapping your hole, install inserts with a wrench or an installation bit. To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole. For slotted inserts, you can drive with a slotted screwdriver instead.

Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.

Black Phosphate-Coated Steel—These inserts resist occasional moisture.

	Inserts									Installation Tools
	Thread Size	For Tap Thread Size	Installed Lg.	Drill Bit Size	For Max. Hole Dia.	Drive Style	Pkg. Qty.		Pkg.		Each
Standard Wall







				Black Phosphate-Coated Steel

				1"-14	1 3/8"-12	1.250"	1 9/32"	1.281"	Slotted	1	90248A089	000000	94110A240	000000

Key-Locking Threaded Inserts for Soft Metal

Add strong threads in soft metal, such as aluminum. The keys on these inserts drive into holes to hold more securely than thread-locking or helical inserts. They prevent slipping and rotating, so they’re stable enough for use in vehicle or aerospace parts that experience heavy vibration. These inserts are comparable to Keensert inserts.

To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.

Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.

Black Phosphate-Coated Steel—These inserts resist occasional moisture.

	Inserts									Installation Tools		Inserts with Installation Tools
								Each
	Thread Size	For Tap Thread Size	Installed Lg.	Drill Bit Size	For Max. Hole Dia.	No. of Locking Keys		1-9	10-Up		Each	No. of Inserts Included		Each
Standard Wall







				Black Phosphate-Coated Steel

				1"-14	1 3/8"-12	1.375"	1 5/16"	1.313"	4	90245A085	000000	000000	92100A744	000000	2	90245A070	000000

Tube End Weld Nuts

Weld these nuts into tube ends to attach threaded fittings such as rod ends. The welded connection is stronger than tapping a tube directly. These nuts are often used to link control arms and suspensions. Also known as tube adapters and weldable threaded tube ends.

	Threading	Thread Lg.		Each
4130 Alloy Steel







	For 1 3/4" OD Tubes

	0.12"	1"-14	2"	Fully Threaded	2"	94640A790	000000


	0.25"	1"-14	2"	Fully Threaded	2"	94640A460	00000

Easy-Start Helical Threaded Insert Installation Tools

These tools compress the diameter of your insert so it fits easily into a tapped hole. They’re the best choice for preventing misaligned or damaged threads—just make sure you have space to turn the crank. Screw or slide an insert onto your tool and drive it between a quarter-turn and half-turn below the surface. Also known as prewinders.

Threaded Insert Installation Tools with Depth Stop

T-Handle


Prong Slot Drive	Threaded Drive

Ensure consistent installation across multiple inserts. Set your desired installation depth, and the stop will prevent you from driving your insert any further.

Prong Slot Drive Helical Insert Tool—Install both left- and right-hand threaded inserts with any thread pitch. However, these tools don't align the threads like threaded-drive tools, so installation may be more difficult.

Threaded Drive Helical Insert Tool—These tools align each coil of your insert perfectly with the thread pitch of your tapped hole for easy installation.

	Mfr.	Handle Style	Helical Insert Tool Drive Type	For Use With		Each
Standard (UN) Thread



	1"-14	—	T-Handle	Prong Slot	Helical Inserts, Screw-Locking Helical Inserts	1338N45	0000000


	1"-14	Heli-Coil	T-Handle	Threaded	Helical Inserts, Screw-Locking Helical Inserts	90261A177	000000

Screw-On Caps

Polyethylene

Thread onto male pipe and fittings for the most secure fit. These caps keep dust, paint, and coatings out of threads and pipe. They also protect from damage during manufacturing, shipping, and storage.

Polyethylene—These tough caps are hard and wear resistant to hold up against scrapes and gouges.

	Thread
	Size	Type	For OD	Inside Ht.	Flexibility	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.
Polyethylene







				For Straight-Thread Fittings

				1"-14	UNS	1"	25/32"	Rigid	150	Red	100	1277K31	000000

Easy-Install Vibration-Damping Rigid Leveling Mounts with Threaded Stud

Style 1

A two-piece design requires less clearance to install than one-piece mounts. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes. A rubber cushion reduces vibration to protect components and extend your machine’s life.

Steel Base—These mounts are best for dry environments since moisture will cause them to rust.

Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.

	Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Base Dia.	Overall Ht.	Cushion Material		Each
Steel Base and Zinc-Plated Steel Stud with Rubber Cushion



	1	1"-14	8"	13,000	0.12"	9"	10 1/4"	Buna-N	60915K77	0000000

Forklift Hitch Receivers


Towing Adapter with Bumper Insert

Image of Specification. Front orientation. Contains Annotated.

Modify your forklift to tow machines, trailers, and disabled vehicles. These adapters have a hitch receiver that works with hitch inserts, mounting plate inserts, drawbar couplers, and other towing connectors. Lock adapters in place with a connecting pin behind each fork, then wrap the chain around your carriage.

Hitch Receiver			Fork Pockets		For Max. Fork		Overall			Mounting Hole
Wt. Cap., lb.	Size	For Hitch Ball Thread Size	No. of	Spacing Ctr.-to-Ctr.	Wd.	Ht.	Lg.	Wd.	Ht.	Dia.	Ctr.-to-Ctr. (A)	Ctr.-to-Ctr. (B)	Forklift Attachment Type	Material	Color		Each
4,000	2" Square	1"-14	2	24"	5"	2"	46"	30 11/16"	6"	19/32"	3 3/8"	1 3/4"	Hook and Chain, Pin	Powder-Coated Steel	Blue	9114N11	0000000

Bumper Inserts

Image of Product. Front orientation. Hitch Inserts.

Add bumper inserts to these adapters to push equipment instead of pulling it. The bumper is rubber, so it won’t scratch surfaces.

Hitch Receiver Size	Overall Lg.	Overall Wd.	Overall Ht.	Material	Base Material	Base Color		Each
2" Square	14 1/16"	30 3/16"	6 1/2"	Rubber	Powder-Coated Steel	Yellow	9114N12	0000000

Helical Insert Taps

Match the size of helical inserts so they fit tightly when installed in the hole.

High-Speed Steel—These taps resist heat and wear to stay sharp.

Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.

Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.

						Drill Bit			Plug Chamfer		Bottoming Chamfer
	For Insert Size	Thread Lg.	Overall Lg.	For Insert Thread Type	No. of Flutes	Size	Decimal Size Equiv.	Shank Type		Each		Each
High-Speed Steel







				Uncoated

				1"-14	2 9/16"	5 7/16"	UNF	4	1 1/32"	1.0313"	Square	91709A071	0000000	91709A494	0000000

Screw-Locking Helical Threaded Inserts

Pronged

The irregularly shaped threads tightly grip screws to prevent them from loosening or backing out under vibration. Use these inserts to create or repair threads in pumps and other machinery that shakes and rattles. Also known as Heli-Coil inserts.

Installation requires a drill bit, a helical insert tap, and an installation tool.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	Inserts							Through-Hole Taps		Closed-End Hole Taps		Installation Tools
	Thread Size	Installed Lg.	Drill Bit Size	For Max. Hole Dia.	Pkg. Qty.		Pkg.		Each		Each		Each
Pronged







				18-8 Stainless Steel

				1"-14	1"	1 1/32"	1.031"	1	90296A037	00000	91709A071	0000000	91709A494	0000000	90261A177	0000000


				1"-14	1.500"	1 1/32"	1.031"	1	90296A038	0000	91709A071	000000	91709A494	000000	90261A177	000000

Hitch Inserts

Insert Shown with Hitch-Ball Components

Use these inserts in hitch-ball connections for towing. They fit into a receiver that's attached to a vehicle. Maximum trailer weight is the total weight being towed. Vertical capacity (also known as tongue weight) represents the weight of the load on the hitch ball.

Height Adapters for Hitch Balls


(Shown in Drop Position)	(Shown in Raise Position)

Height adapters for hitch balls raise or drop the ball to the height that works for your trailer. From the drop position, rotate the adapter 180° to achieve the raise position.

Stainless Steel— Adapters made from stainless steel offer the most long-term corrosion resistance.

	Vert. Cap., lb.	Drop Ht.	Rise Ht.	Overall Dp.	For Hitch Receiver Size	For Hitch Ball Thread Size		Each
Powder-Coated Steel



	6,000	600	2"	3/4"	12"	2" Square	1"-14	2507T21	000000


	6,000	600	4"	2 3/4"	12 1/4"	2" Square	1"-14	2507T22	00000


	Stainless Steel



			6,000	600	2"	3/4"	11 3/4"	2" Square	1"-14	7765T101	00000

Height Adjusting Adapters for Hitch Balls


(Shown in Drop Position)	(Shown in Raise Position)

	Vert. Cap., lb.	Max. Drop Ht.	Max. Rise Ht.	Ht. Adjustment Increments	Overall Dp.	For Hitch Receiver Size	For Hitch Ball Thread Size		Each
Powder-Coated Steel



	6,000	600	11"	9 3/4"	2"	12"	2" Square	1"-14	7765T54	000000


	10,000	1,000	11"	9 3/4"	2"	12"	2" Square	1"-14	7765T53	000000

Helical Threaded Inserts with Installation Tools

Drill Bit, Installation Tool

and Through-Hole Tap

Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	For Max. Hole Dia.	No. of Inserts Included	Includes		Each
Pronged







	18-8 Stainless Steel

	1"-14	1.500"	1 1/64"	1.016"	6	Drill Bit Installation Tool Through-Hole Tap	91732A121	0000000

Key-Locking Threaded Inserts with Installation Tools

Paired with the right tool for installation, these inserts create strong threads in soft metal, such as aluminum. They have keys that drive into material to prevent inserts from slipping and rotating in the hole.

Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.

Black Phosphate-Coated Steel—These inserts resist occasional moisture.

	Drill Bit Size	For Max. Hole Dia.	No. of Locking Keys	No. of Inserts Included		Each
Standard Wall







	Black Phosphate-Coated Steel

	1"-14	1 3/8"-12	1.375"	1 5/16"	1.313"	4	2	90245A070	000000

Left-Hand-Thread Tube End Weld Nuts

These weld nuts prevent fasteners from backing out of assemblies that rotate counterclockwise. Their left-hand threads pair with left-hand screws and rods to stop the fastener from loosening as the assembly turns. Weld them to the end of a tube for a stronger connection than tapping the tube directly. Also known as tube adapters and weldable threaded tube ends.

	Threading	Thread Lg.		Each
4130 Alloy Steel







	For 1 3/4" OD Tubes

	0.12"	1"-14	2"	Fully Threaded	2"	94640A507	000000


	0.25"	1"-14	2"	Fully Threaded	2"	94640A464	00000

Hitch Balls

Mount these onto a hitch insert, and connect them to a trailer with a hitch-ball coupler. Maximum trailer weight is the total weight being towed.

	Hitch Ball Dia.	Thread Size	Stud Lg.		Each
Chrome-Plated Steel Hitch Balls



	5,000	2"	1"-14	2 1/8"	8785T5	000000


	6,000	2 5/16"	1"-14	2"	8785T22	00000


	Stainless Steel Hitch Balls



			8,200	2"	1"-14	1 3/4"	8785T82	00000


			8,200	2 5/16"	1"-14	1 3/4"	8785T98	00000

Hollow Tapered Plugs

A hollow construction makes these plugs extra flexible, so they compress for easy installation and a snug fit. The tapered profile fits a range of hole diameters. If you flip the plug over, it can be used as a cap.

Polyethylene—Convenient and economical. Instead of cleaning and reusing, just toss and grab a new plug.

	For Thread Size	Ht.	Max. Temp., ° F	Color	Flange Dia.	Pkg. Qty.		Pkg.
Polyethylene



	0.866" to 0.975"	1"-14	5/8"	150	Red	1 1/8"	100	4491K102	00000

Key-Locking Threaded Insert Installation Tools

Style A

Thread inserts and drive down their keys with a single tool. These tools are compatible with Keensert inserts.

	For Tap Thread Size	Style	Features		Each
For Thick-Wall Inserts



	1"-8, 1"-12, 1"-14	1 3/8"-12	A	Slotted End	6721N44	000000

Hitch Kits


Kit with Cotter Pin	Kit with Locking Pin

Everything you need to attach a hitch to your vehicle's receiver—these kits include a hitch insert, ball, and pin. To match the height of your trailer, you can flip them over to raise or drop the ball. The ball in these kits connects with hitch-ball couplers on trailers.

Locking—Kits with a locking hitch pin prevent your hitch from getting stolen—you can't pull the hitch insert out without the key. A dust cap keeps debris out of the locking mechanism.

For Maximum Trailer Weight—Maximum trailer weight is the total weight being towed.

Vertical Capacity—Vertical capacity (also known as tongue weight) is the weight of the load on the hitch ball.

								Hitch Ball				Hitch Pin
	For Max. Trailer Wt., lb.	Vert. Cap., lb.	Drop Ht.	Rise Ht.	Overall Dp.	For Hitch Receiver Size	No. of Hitch Balls Included	Dia.	Material	Thread Size	Stud Lg.	Dia.	Lg.	Keying	No. of Keys Included		Each
Cotter



		6,000	600	2"	3/4"	11 1/2"	2" × 2" Square	1	2"	Chrome-Plated Steel	1"-14	2"	5/8"	2 7/8"	—	—	9012N11	000000


		Locking



				6,000	600	2"	3/4"	13 1/4"	2" × 2" Square	1	2"	Chrome-Plated Steel	1"-14	2"	5/8"	3 1/4"	Keyed Differently	2	9012N12	00000