Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

Shield circuit boards from flux, solder, conformal coatings, and high temperatures.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

No mixing required—these potting compounds come ready to apply.

Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Use these coatings on steel beams and pipes.

Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.

Prevent condensation from forming on refrigeration and air conditioning lines and cold‐water piping.

Protect and repair insulation with this cotton fiber and resin mesh.

Form this putty around metal pipes and tubing or spread on a flat metal surface to stop heat from traveling to adjoining surfaces when soldering, welding, and brazing.

Set and repair cast iron and steel furnaces, heaters, stoves, and boilers with this ready-to-use cement. It experiences minimal shrinkage for a permanent smokeproof and gasproof joint. Apply with a trowel or a spatula.

Lay, coat, and bond firebricks. Apply this mortar with a trowel.

Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour and reaches full strength in 24 hours.

This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas.