McMaster-Carr logo
    Filter by
    Approximate Coverage
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    For Use Outdoors
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    41 Products

    Condensation-Reducing Protective Coatings

    Image of Product. Front orientation. Protective Coatings. Condensation-Reducing Protective Coatings, Aerosol Can.
    Image of Product. Front orientation. Protective Coatings. Condensation-Reducing Protective Coatings, Pail.

    Aerosol

    Can

    Pail

    An alternative to jacketing, these coatings prevent condensation from forming on refrigeration, air conditioning lines, and cold-water piping. They are often used on irregularly shaped surfaces, such as fittings, flanges, and valves. All coatings adhere to metal.
    Mastics—These coatings adhere to PVC and CPVC in addition to metal.
    For Use Outdoors—These coatings create a vapor barrier and protect from conditions outdoors.
    Container
    Size,
    gal.
    Net Wt.,
    oz.
    Type
    Temp.,
    ° F
    Form
    Approx. Coverage,
    ft²
    Density,
    lb/gal
    Begins
    to Harden
    Color
    For Use
    Outdoors
    Each
    —14Aerosol Can32 to 120Spray16—5 min.WhiteNo6780K32000000
    1—Pail-40 to 180Mastic16.511.32 hr.WhiteYes2965N1100000
    1—Pail-20 to 190Mastic16.512.12 hr.WhiteYes2965N1200000
    5—Pail0 to 150Mastic297.824 hr.BlackNo4588K3000000

    Vibration-Damping Coatings

    Image of Product. Front orientation. Vibration-Damping Coatings. Sprays.
    Image of Product. Front orientation. Vibration-Damping Coatings. Liquids.

    Sprays

    Liquids

    Apply to irregularly shaped equipment and large areas to reduce noise from vibration. These coatings turn energy from vibrations into heat to dampen sound and movement.
    Cannot Be Sold To—Coatings that cannot be sold to California are restricted due to VOC (Volatile Organic Compounds) regulations.
    Container
    Size, fl. oz.
    Form
    Approx. Coverage
    Area, ft²
    Max. Temp.,
    ° F
    Color
    Cannot Be
    Sold To
    Each
    18Spray20250BlackCalifornia9545T5000000
    32Liquid10250Gray—9545T200000

    Heat Barrier Coatings

    Putty
    Image of Product. Front orientation. Heat Barriers. Heat Barrier Coatings, Putty.
    Form this putty around metal pipes and tubing or spread on a flat metal surface to stop heat from traveling to adjoining surfaces when soldering, welding, and brazing.
    Container
    Size, fl. oz.
    Begins to
    Harden, hr.
    Min.
    Temp.
    Max. Temp.,
    ° F
    Color
    Each
    1612Not Rated2,000Gray76685A65000000
    Spray Gel
    Image of Product. Front orientation. Heat Barriers. Heat Barrier Coatings, Spray Gel.
    Spray on this clear gel to protect components and surfaces from heat damage and discoloration caused by soldering, welding, and brazing. It is nonstaining and won't leave a residue.
    Container
    Size, fl. oz.
    Approx. Coverage
    Area, ft²
    Min. Temp.,
    ° F
    Max.
    Temp.
    Density,
    lb/gal
    Each
    324032Not Rated97654A2000000

    Firebrick Repair Coatings

    Image of Product. Front orientation. Firebrick Repair Coatings.
    Renew heat resistance and performance of worn firebrick. Apply coating with a brush or spray on for a crack-free seal.
    Container
    Size, gal.
    Approx. Coverage
    Area, ft²
    Temp. Range,
    ° F
    Density,
    lb/ft³
    Color
    Each
    193-50 to 2,350100Beige9366K50000000

    Gap-Filling Spray Foam Insulation

    Seal and insulate cracks, gaps, and other hollow spaces with this insulation.
    Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Gap-Filling Spray Foam Insulation, Nonreusable.
    Image of Product. Front orientation. Spray Foam Insulation Guns.

    Dispensing Guns

    1.2 cu. ft. Approximate Coverage—Insulation that covers 1.2 cu. ft. is best for touch-up and repair jobs.
    12 cu. ft. Approximate Coverage—Insulation that covers 12 cu. ft. comes out in a smooth line, so they're useful for filling and sealing gaps to prevent airflow.
    12.3 cu. ft. Approximate Coverage—Insulation that covers 12.3 cu. ft. sprays farther and more thoroughly than other foam insulation. Use them to fill cavities, channels, framing, and hollow tubing.
    Spray Foam Insulation
    Dispensing Guns
    Cleaners for
    Dispensing Guns
    Container
    Net Wt.,
    lb.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Each
    Each
    Each
    For Walls and Ceilings
    4Can1.2510.16 BTU/hr @ 75° F2.11Beige-200 to 240Two Cans of Foam with Two Cone Spray Nozzles—9325K64000000———0———0
    16Cylinder12.35240.2 BTU/hr @ 75° F1.3Beige-200 to 240One Cylinder with Two Trigger-Style WandsASTM E84 5/20 for Flame and Smoke
    		9325K11000000———0———0
    30Cylinder122240.16 BTU/hr @ 75° F2.5Beige-200 to 240Two Cylinders with a Trigger-Style Gun and Ten Cone Spray NozzlesASTM E84 0/45 for Flame and Smoke
    		4342N110000008551K140000007738A34000000
     
    Reusable
    Image of Product. Front orientation. Spray Foam Insulation. Gap-Filling Spray Foam Insulation, Reusable.
    5 cu. ft. Approximate Coverage and 9.6 cu. ft. Approximate Coverage—Insulation that covers 5 or 9.6 cu. ft is good for applications that require firmness, such as roofing and where there’s foot traffic. It comes out smooth, so you won’t need to add extra layers or smooth it yourself. The included snap-tip nozzles spray in either a fan or cone pattern.
    Container
    Net Wt.,
    lb.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Each
    For Walls and Ceilings
    15Cylinder5510.16 BTU/hr @ 75° F3.1Beige-200 to 200Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles9325K580000000
    30Cylinder9.6510.16 BTU/hr @ 75° F3.1Beige-200 to 200Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles9325K59000000
     
    Replacement Nozzles
    Each
    Snap-Tip Replacement Nozzles9325K44100000

    Firebrick Bonding Mortar

    Image of Product. Front orientation. Refractory Cement. Firebrick Bonding Mortar.
    Lay, coat, and bond firebricks. Apply this mortar with a trowel. One pail sets approximately 40 bricks.
    Container
    Net Wt., lb.
    Container
    Type
    Approx. Brick
    Coverage
    Max. Temp.,
    ° F
    Density,
    lb/ft³
    Color
    Each
    15Pail403,000129Gray9368K6000000

    Spray Foam Insulation

    Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour and reaches full strength in 24 hours.
    Dispensing guns (sold separately) are required for the 20oz. cans of black foam insulation.
    Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Spray Foam Insulation.
    Image of Product. Front orientation. Spray Foam Insulation Guns.

    Dispensing Guns

    Spray Foam Insulation
    Dispensing Guns
    Cleaners for
    Dispensing Guns
    Container
    Net Wt.,
    oz.
    Type
    Approx. Coverage
    @ Thk.
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Specs. Met
    Each
    Each
    Each
    For Walls and Ceilings
    12Can16 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.1Black-200 to 240One Dispensing TubeASTM E84 15/25 for Flame and Smoke—8551K1200000———0———0
    12Can16 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.2Beige-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		—8551K110000———0———0
    20Can30 ft² @ 1/2"1240.2 BTU/hr @ 72° F1Black-200 to 240—ASTM E84 15/25 for Flame and Smoke—8551K15000008551K140000007738A34000000
    24Can32 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.2Beige-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		—8551K3100000———0———0
     
    For Windows and Doors
    24Can32 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.2Beige-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		AAMA 812-048551K7500000———0———0
     

    Pipe Insulation Repair Strips

    Image of Product. Front orientation. Pipe Insulation Repair Strips.
    Protect and repair insulation with this cotton fiber and resin mesh. For small sections, dip the strip in warm water for five seconds then install. For large sections, apply dry to piping and spray with water. Strips harden in 10 minutes. Once hardened, they can be painted.
    Wd.
    Lg.,
    ft.
    Density,
    lb/ft³
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Material
    Filler
    Material
    Flexibility
    Color
    Each
    0.025" Thick
    4"1526.71024CottonResinFlexibleWhite45545K4700000
    6"1529.41024CottonResinFlexibleWhite45545K480000
    8"1526.41024CottonResinFlexibleWhite45545K4600000
     

    Corrosion-Resistant Protective Film and Tape

    Image of Product. Front orientation. Protective Film and Tape. Corrosion-Resistant Protective Film and Tape.
    Providing all-weather corrosion protection, this vinyl tape resists salt water, UV light, acids, and alkalies. It also resists impact and abrasion. Use it to wrap pipes and electrical conduit both above and below ground.
    Wd.
    Lg.,
    ft.
    Thk.
    Material
    Adhesive
    Material
    Temp. Range,
    ° F
    Tensile Strength,
    lbf/in. wd.
    Adhesion to
    Steel, lbf/in. wd.
    Color
    Each
    2"750.03"Rubber
    		Synthetic Rubber-20 to 1403015Gray5459K72000000
    4"750.03"Rubber
    		Synthetic Rubber-20 to 1403015Gray5459K75000000
    6"750.03"Rubber
    		Synthetic Rubber-20 to 1403015Gray5459K77000000
     

    Extreme-Temperature Refractory Cement

    Image of Product. Front orientation. Refractory Cement. Extreme-Temperature Refractory Cement.
    Set and repair cast iron and steel furnaces, heaters, stoves, and boilers with this ready-to-use cement. It experiences minimal shrinkage for a permanent smokeproof and gasproof joint. Apply with a trowel or a spatula. A minimum temperature of 212° F is required to harden. Cut hardened cement with a carbide-tipped saw.
    Container
    Size
    Type
    Approx. Coverage
    Area, ft²
    Cure Temp.,
    ° F
    Max. Temp.,
    ° F
    Density,
    lb/ft³
    Color
    Each
    8 fl. oz.Pail0.632122,500122Beige9372K8500000
    64 fl. oz.Pail52122,500122Beige9372K8600000
    1 gal.Pail102122,500122Beige9372K8700000

    Strong-Grip Pipe Insulation Tapes

    Image of ProductInUse. Front orientation. Pipe Insulation. Strong-Grip Pipe Insulation Tapes.
    Seal joints and gaps in your line in seconds. This tape wraps around irregular shapes, tight bends, small-diameter pipes, and other hard-to-reach areas where you need a quick fix.
    Vinyl Foam with Foil Jacket—Prevent condensation from forming. The foil jacket repels moisture while also shielding pipes from dirt, dust, and minor scuffs.
    Butyl—Flexible enough to wrap around pipe without tearing or cracking.
    Buna-N/Neoprene/Vinyl Foam—This combination repels moisture to prevent condensation, drip formation, and mold growth.
    Cork Rubber—A layer of cork resists oil, reduces vibration, and dampens sound.
    Adhesive Backing
    Thk.
    Wd.
    Lg.,
    ft.
    Temp. Range,
    ° F
    Insulation
    R Value
    Heat Flow Rate
    @ Temp.
    Flexibility
    Each
    Vinyl Foam with Foil Jacket
    1/8"2"30-40 to 1802Not RatedFlexible6801K21000000
     
    Butyl
    1/8"2"30-30 to 17520.14 BTU/hr @ 75° FFlexible4476K200000
     
    Buna-N/Neoprene/Vinyl Foam
    1/8"2"30-40 to 160Not Rated0.3 BTU/hr @ 75° FFlexible6801K2200000
     
    Cork Rubber
    1/8"2"3020 to 190Not Rated0.25 BTU/hr @ 75° FFlexible93855K1100000
     

    Fireblock Spray Foam Insulation

    Often used around electrical outlets and plumbing openings, this foam insulation helps prevent flames and smoke from spreading between walls and floors. It’s orange so inspectors will easily recognize it as fireblock. Rated UL 2818, also known as GREENGUARD Certified, it’s been tested to meet strict limits on VOC (volatile organic compound) emissions.
    Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
    Dispensing guns (sold separately) are required for the 24 oz. can of insulation.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Fireblock Spray Foam Insulation.
    Image of Product. Front orientation. Spray Foam Insulation Guns.

    Dispensing Guns

    Spray Foam Insulation
    Dispensing Guns
    Cleaners for
    Dispensing Guns
    Container
    Net Wt.,
    oz.
    Type
    Approx. Coverage
    @ Thk.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Specs.
    Met
    Each
    Each
    Each
    For Walls and Ceilings
    12Can16 ft² @ 1/2"5240.2 BTU/hr @ 72° F1.1Orange-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		UL 28184341N11000000———0———0
    24Can36 ft² @ 1/2"5240.2 BTU/hr @ 72° F1Orange-200 to 240—ASTM E84 25/50 for Flame and Smoke
    		UL 28184341N12000008551K140000007738A34000000
     

    Flame-Retardant Gap-Filling Spray Foam Insulation

    This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas. It can be cut after 5 minutes and reaches full strength in an hour. To use outdoors, paint or cover for UV resistance. The included snap-tip nozzles spray in either a fan or cone pattern.
    Reusable
    Image of Product. Front orientation. Spray Foam Insulation. Flame-Retardant Gap-Filling Spray Foam Insulation.
    Container
    Net Wt.,
    lb.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Each
    For Walls and Ceilings
    15Cylinder9.7510.154 BTU/hr @ 75° F1.75Beige-200 to 240Two Cylinders with a Trigger-Style Gun and Eight Snap-Tip NozzlesASTM E84 10/350 for Flame and Smoke
    		9325K7220000000
    30Cylinder17510.154 BTU/hr @ 75° F1.75Beige-200 to 240Two Cylinders with a Trigger-Style Gun and Eight Snap-Tip NozzlesASTM E84 10/350 for Flame and Smoke
    		9325K721000000
     
    Replacement Nozzles
    Each
    Snap-Tip Replacement Nozzles9325K44100000

    Quick-Cure Spray Foam Insulation

    Expanding quickly to fill large voids, this foam insulation begins to harden in 3 minutes so you can cut, sand, and finish your surface.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Quick-Cure Spray Foam Insulation.
    Container
    Net Wt.,
    oz.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Heat Flow
    Rate @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Each
    For Walls and Ceilings
    13Can0.33Not Rated1.9Blue-40 to 175Two Dispensing TubesASTM E84 25/210 for Flame and Smoke
    		54315K51000000
     
    back to top