About Sealant Flexibility
More
About Paint and Protective Coatings
More
Low-Outgassing Silicone Sealants
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum. They’re made of silicone, so they’re RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Color | Each | |
5.8 | Cartridge | 150 min. | 7 days | 420% | -25% to 25% | 600 | Durometer 36A (Medium Soft) | -200° to 500° | ASTM E595 | Metal Plastic Rubber Composites Glass | White | 0000000 | 0000000 |
Noncorrosive Silicone Sealants
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Color | Each | |
Loctite® Silicone | |||||||||||||
SI 5011 CL | 2.7 | Tube | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 000000 |
SI 5011 CL | 10.1 | Cartridge | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 00000 |
SI 5109 | 10.1 | Cartridge | 60 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 15A) | -75° to 600° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Red | 0000000 | 00000 |
Permatex Silicone | |||||||||||||
81173 | 12.9 | Cartridge | 30 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 15A) | -75° to 450° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | Black | 0000000 | 00000 |
All-Weather Application Sealants
Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).
Container | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Color | Cannot Be Sold To | 1-11 | 12-Up | |
Hybrid Polymer | |||||||||||||
10 | Cartridge | 5 min. | 14 days | Not Rated | -25% to 25% | Not Rated | -20° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | White | CA | 0000000 | 000000 | 000000 |
10 | Cartridge | 10 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -65° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | Clear | __ | 0000000 | 00000 | 00000 |
Optically Clear Sealants
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. 3M 730 UV is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Each | |
3M Hybrid Polymer | ||||||||||||
730 UV | 10.3 | Cartridge | 30 min. | 24 hrs. | 300% | Not Rated | 250 | Soft (Durometer 30A) | -40° to 190° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Wood | 0000000 | 000000 |
Puncture-Resistant Sealants
Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Polyurethane | ||||||||||||
10.1 | Cartridge | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 000000 |
20 | Sausage Pack | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 |
All-Weather Application Structural Sealants
Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
5 fl. oz. | Tube | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 000000 | 00000 |
10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |
20 fl. oz. | Sausage Pack | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
28 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
2 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
5 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 |
Structural Sealants
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Hybrid Polymer | ||||||||||||
760 UV | 9.8 | Cartridge | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 000000 | |
760 UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
3M Polyurethane | ||||||||||||
540 | 20.3 | Sausage Pack | 90 min. | 24 hrs. | 600% | -25% to 25% | Medium Soft (Durometer 40A) | -40° to 190° | Metal Plastic Rubber Composites Wood | 00000000 | 00000 | |
551 | 20.3 | Sausage Pack | 180 min. | 24 hrs. | 600% | Not Rated | Medium (Durometer 45A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | White | 00000000 | 00000 |
560 | 20.3 | Sausage Pack | 60 min. | 24 hrs. | 300% | Not Rated | Medium Hard (Durometer 55A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
Sika Sikaflex Polyurethane | ||||||||||||
1-A | 10.1 | Cartridge | 6 hrs. | 7 days | 550% | -35% to 35% | Medium Soft (Durometer 35A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 0000000 | 00000 | |
1-A | 20 | Sausage Pack | 6 hrs. | 7 days | 550% | -35% to 35% | Medium Soft (Durometer 35A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Limestone | 00000000 | 00000 |
15LM | 10.1 | Cartridge | 6 hrs. | 7 days | 700% | -50% to 100% | Soft (Durometer 20A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 00000000 | 00000 |
Primer for Sika Sikaflex Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |
Vacuum Leak Sealants
Seal leaks on vacuum systems and components.
Epoxy resin sealants, also known as Torr Seals, form a rigid bond.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Vacuum Rating, torr | Maximum Vacuum @ Temperature | Tensile Strength, psi | Hardness | Mix Ratio | Temp. Range, °F | For Joining | Color | Each | |
Epoxy Resin | |||||||||||||
2 fl. oz. | Cartridge | 60 min. | 3 days | High | 10 -9 torr @ 72° F | 5,000 | Extra Hard (Durometer 75D) | 2:1 | -45° to 245° | Metal, Glass, Masonry | Off-White | 0000000 | 0000000 |
4.2 fl. oz. | Tube | 60 min. | 3 days | High | 10 -9 torr @ 72° F | 5,000 | Extra Hard (Durometer 75D) | 2:1 | -45° to 245° | Metal, Glass, Masonry | Off-White | 0000000 | 000000 |
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Vacuum Rating, torr | Maximum Vacuum @ Temperature | Tensile Strength, psi | Hardness | Mix Ratio | Temp. Range, °F | For Joining | Color | Each | |
Epoxy Resin | |||||||||||||
2 | Cartridge | 60 min. | 3 days | High | 10 -9 torr @ 72° F | 5,000 | Extra Hard (Durometer 75D) | 2:1 | -45° to 245° | Metal, Glass, Masonry | Off-White | 0000000 | 0000000 |
Loading Method | For Cartridge Size | Material | Each | |
Cartridge | 2 oz. | Plastic | 0000000 | 0000000 |
Self-Leveling Oil- and Fuel-Resistant Sealants
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | |
Buna-N | |||||||||||||
4 | Tube | 10 min. | 24 hrs. | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 00000 | |
10.3 | Cartridge | 10 min. | 24 hrs. | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 0000 |
All-Weather Application Concrete Joint Sealants
Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | |||||||||||||||
28 | Cartridge | 30 min. | 48 hrs. | 1,000% | -50% to 50% | 125 | Not Rated | 1" | 1" | 32° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
Self-Leveling All-Weather Application Concrete Joint Sealants
Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Hybrid Polymer | ||||||||||||||
28 | Cartridge | 45 min. | 48 hrs. | 400% | Not Rated | Soft (Durometer 25A) | 1" | 1" | 35° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | 0000000 | 000000 |
High-Strength Self-Leveling Concrete Joint Sealants
Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Polyurethane | |||||||||||||||
PC 6231 | 8.6 | Cartridge | 3 min. | 90 min. | 1:1 | 82% | -10% to 10% | Hard (Durometer 75A) | 3/4" | 2 1/4" | -40° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Gray | 0000000 | 000000 |
Sika Sikaflex Polyurethane | |||||||||||||||
1C SL | 10.1 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
1C SL | 29 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
High-Strength Concrete Joint Sealants
Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Sika Sikasil Silicone | ||||||||||||||
728 NS | 29 | Cartridge | 25 min. | 7 days | 1,000% | -50% to 100% | Soft (Durometer 10A) | 1" | 1/2" | -80° to 350° | Metal, Plastic, Rubber, Composites, Masonry, Wood | Limestone | 0000000 | 000000 |
Silicone | ||||||||||||||
__ | 20 | Sausage Pack | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
__ | 29 | Cartridge | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
Primer for Sika Sikasil Sealant (8-fl. oz. Bottle) | 0000000 | Each | 000000 |
Roof Joint Sealants
Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Asphalt | ||||||||||||
10.1 | Cartridge | 60 min. | 28 days | Not Rated | Not Rated | Not Rated | Not Rated | -40° to 180° | Metal, Asphalt, Composites, Masonry, Wood | Black | 0000000 | 00000 |
Buna-N | ||||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | Not Rated | Not Rated | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 00000 |
Self-Leveling Roof Joint Sealants
Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Tensile Strength | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | |||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | 40° to 100° | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
EPDM Rubber | |||||||||||
10.3 | Cartridge | 4 hrs. | 3 days | Not Rated | Not Rated | 20° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | Black | 0000000 | 00000 |
Optically Clear Two-Part Silicone Potting Compounds
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics. Use it to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compound is the best choice for high-temperature applications and electronics exposed to thermal cycling. It has good moisture resistance but poor chemical and abrasion resistance. Silicone provides excellent electrical insulation. It’s also known as RTV (room-temperature vulcanizing). Use a gun (sold separately) with the included mixer nozzle to dispense.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, min. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Soft | |||||||||||
5620 | 13.5 | Thin Liquid | 20 | 30 | 530 | 0.16 | -65° to 390° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Clear | 00000000 | 0000000 |
Light-Activated Silicone Potting Compounds
Pot multiple electronics in a flash—these compounds don’t require mixing and they cure within seconds under UV light. Made of silicone, they’re softer and more flexible than epoxy or urethane compounds, so they’re better at protecting against shocks and vibration. They also withstand a wider range of temperatures, so they’re often used with electronics that heat and cool rapidly. These compounds are excellent electrical insulators, and they’ll shield your components from moisture and dust. However, they don’t hold up well to abrasion or chemicals. The tapered nozzle lets you apply them precisely.
Dry Time | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Light Intensity Requirements to Reach Full Strength | Cure Type | Dielectric Strength, V/mil | Thermal Conductivity | Temp. Range, °F | Specifications Met | For Use On | Color | Each | |
Loctite® Compounds—Soft | ||||||||||||||
5091 | 10 1/10 | Thick Liquid | 20 | 24 | 60 sec. per side @ 40 mW/cm2 | UV Light | 450 | Not Rated | -65° to 350° | UL Recognized Component | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Fiberglass, Composites, Plastic, Silver | White | 0000000 | 0000000 |
Ready-to-Use Silicone Potting Compounds
No mixing required—these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing) compounds because they don’t need heat or UV light to cure.
Container | Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Color | Clarity | Each | |
Compounds—Soft | |||||||||||||
10.1 | Cartridge | Paste | 10 min. | 24 | 450 | Not Rated | -70° to 400° | MIL-A-46106 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Plastic, Rubber, Glass | Black | Opaque | 00000000 | 000000 |
Optically Clear Epoxy Potting Compounds
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Optically Clear Epoxy Potting Compounds—Extra Hard | ||||||||||
1.7 | Thick Liquid | 40 | 24 | 229 | 0.45 | -65° to 275° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Amber | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Epoxy Potting Compounds
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Extra Hard | |||||||||||
3336 | 1.4 | Thick Liquid | 15 min. | 24 hrs. | Not Rated | Not Rated | -65° to 350° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Amber | 0000000 | 000000 |
E-60NC | 1.7 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 6.8 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 13.5 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
Mixer Nozzle for 6.8 fl. oz. and 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 6.8 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Plunger for 1.4 fl. oz. Loctite Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 1.4 fl. oz. Loctite Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 1.7 fl. oz. Loctite Cartridges | 00000000 | Each | 00000 |
Mixer Nozzle for 1.7 fl. oz. Loctite E-60NC Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Heat-Transfer Potting Compounds
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Cartridge potting compound requires a gun and mixer nozzle (each sold separately) to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
0.9 | Thick Liquid | 25 min. | 24 | 450 | 1.87 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 000000 |
1 | Gel | 4 hrs. | 6 | Not Rated | 1.87 | 600° | 4 hrs. @ 250° F then 2 hrs. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 00000 |
1.5 | Thin Liquid | 30 min. | 26 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 00000 |
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
1.7 | Thick Liquid | 15 | 8 | 520 | 1.01 | -40° to 210° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
---|---|---|---|
Mixer Nozzle for 1.7 fl. oz. Cartridges | 00000000 | Each | 00000 |
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Mix Ratio | Tensile Strength, psi | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
16 | Thin Liquid | 30 min. | 26 | 6:1 | 9,500 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 0000000 |
Heavy Duty Coatings for Electronics
Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, epoxies have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. Dispense with a mixer nozzle and a gun (each sold separately).
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Coatings—Extra Hard | ||||||||||
E-00CL | 1.7 | Thick Liquid | 5 | 24 | 400 | -65° to 180° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Clear | 0000000 | 000000 |
E-00CL | 6.8 | Thick Liquid | 5 | 24 | 400 | -65° to 180° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Clear | 0000000 | 00000 |