Filter by
Certification
DFARS Compliance
About Heat-Shrink Tubing
More
Interference-Shielding Heat-Shrink Tubing
- Material: Polyolefin Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 500V/mil
- Shrink Temperature: 215° F
- Temperature Range: -65° to 275° F
- Specifications Met: UL Recognized Component
A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices. This tubing is often used to cover a terminal where an existing shield has been stripped for a connector.
Note: For proper grounding, a conductive wire or braid strip (not included) should be wound around the outside of wires or attached by conductive epoxy (not included) prior to shrinking.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1 ft. Lg. | 4 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | ||
| 0.19" | 0.09" | 0.02" | Black | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 0.13" | 0.03" | Black | 0000000 | 00000 | 0000000 | 00000 |
| 0.38" | 0.19" | 0.03" | Black | 0000000 | 00000 | 0000000 | 00000 |
| 0.5" | 0.25" | 0.03" | Black | 0000000 | 00000 | 0000000 | 00000 |
| 0.75" | 0.38" | 0.03" | Black | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 0.5" | 0.04" | Black | 0000000 | 00000 | 0000000 | 00000 |