Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Access hard-to-reach spots and drill deep holes.

More wear resistant than cobalt steel and high-speed steel, carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.

When one end becomes worn, reverse the bit to use the other end.

Harder, stronger, and more wear resistant than high-speed steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Unlike traditional wire-installing drill bits, you do not need to strip the end of the wire when using one of these bits. After drilling, insert the wire into the bit's hollow shaft and pull through the hole.

Pair these caribide inserts with a compatible drill bit body.

The built-in guide has a beveled tip that fits into countersunk holes in hardware, such as hinges and latches, to center the bit.

Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short-length bits.

Designed to lift chips out of the hole, these bits reduce clogging and improve coolant flow.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

For the highest accuracy and longest tool life, these solid-carbide bits are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits.

More wear resistant than cobalt steel and high-speed steel, carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

Use these bits for general purpose drilling in most material.

Sets include cutters, a pilot pin, and a hex key. Also known as annular cutters.

Use these metric cutters with magnetic-base drills. Also known as annular cutters.

Use these cutters with Milwaukee magnetic-base drill presses. Also known as annular cutters.

Carbide is harder, stronger, and more wear resistant than cobalt steel and high-speed steel for better performance on hard and abrasive materials.

These countersinks create a surface that minimizes contact between the material and the lathe centers to prevent damage and allow for more precise machining.

Use in general purpose applications.

To remove the need for a starter hole, the drill point is incorporated into the countersink flutes.

For general purpose use.

These countersinks come attached to a high-speed steel jobbers’ bit.

Also known as step drill bits. The 82° countersink angle is compatible with the profile of flat- and oval-head inch screws.

Choose for general purpose applications.

Use in general purpose applications.

For excellent performance on hard and abrasive materials, carbide is harder, stronger, and more wear resistant than high-speed steel.

For use with most metals in addition to plastic and wood.

Also known as subland drill bits, these last longer than standard counterboring drill bits because the diameter stays the same after sharpening.

Drill and counterbore holes with enough clearance for socket head screws without changing tools.

No need for separate tools, these sets have counterbores in various sizes that drill and counterbore holes with enough clearance for socket head cap screws.

Available in metric sizes, these tools let you drill and ream holes with the same tool. They are for use in drill presses, turret lathes, screw machines, and other machine tools.

Enlarge existing holes without changing the depth.

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Drill and thread holes for pipe and conduit without switching tools.

Quickly connect these saws to your drill or drill press with the built-in arbor.

The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.

The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.