Use these fittings for low-pressure applications in noncorrosive environments.

For extra leak protection in low-pressure lines, the threads of this Schedule 40 pipe have sealant already applied.

Pipe has clockwise (right-hand) threads on one end and counterclockwise (left-hand) threads on the other end. When you use a wrench to turn, connections on both ends tighten at the same time.

These flanges are for low-pressure applications in noncorrosive environments.

Suitable for use in fire-protection applications, these pipe fittings are made of cast iron, so they are brittle and can be quickly opened with the strike of a sledge hammer.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

One end of these fittings has clockwise (right-hand) threads and the other has counterclockwise (left-hand) threads. Their galvanized finish gives them fair corrosion resistance.

Made of galvanized steel, this Schedule 40 pipe has fair corrosion resistance and is designed for low-pressure applications.

The acrylic sealant on this pipe offers extra protection against leaks. Also known as schedule 40 pipe, this pipe is designed for use in low-pressure environments.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

Also known as Pressure Class 300 flanges, these medium-pressure flanges have a galvanized finish for fair corrosion resistance.

Typically used with standard-wall and low-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 40.

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

Use this pipe in gravity-flow applications both above and below ground.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Use these clamps to connect easy-access CPVC pipe fittings and pipe.

To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.

These connectors are for use in low-pressure air and vacuum conveying systems, as well as in gravity-flow systems.

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools.

Also known as Chicago and universal couplings, these have identical claw-style heads and connect by being pushed together with a quarter twist.

Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.

Also known as ground-joint couplings and boss couplings, these fittings are designed for high-pressure steam applications up to 600 psi. Insert the barbed end of the fitting into hose, then position the interlocking clamp over the hose and bolt into place. The clamp firmly grips your hose as it locks into the ring of the barbed end, creating a leak-tight seal.