Filter by
System of Measurement
Minimum Wall Thickness After Shrinking
Maximum Temperature
Material
Color
Shrink Temperature
Clarity
Dielectric Strength
RoHS
REACH
Flexibility
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
Heat-Shrink Tubing Type
Shrink Ratio
About Heat-Shrink Tubing
More
High-Temperature Heat-Shrink Tubing
Use this tubing in applications where temperatures reach up to 500° F. It’s often used to insulate electronic components. Tubing resists abrasion and chemicals. Semi-rigid, it bends only slightly.
PEEK tubing has a higher dielectric strength than PTFE, so it’s better for electrical insulation. It also withstands high-pressure applications and is often used in oil and gas exploration.Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
PEEK Plastic
- Shrink Ratio: 1.4:1
- Dielectric Strength: 580 V/mil
- Shrink Temperature: 575° F
- Temperature Range: -10° to 500° F
- Flexibility: Semi-Rigid
ID | |||||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | For Wire Gauge  | Color | Lengths, ft. | Per Ft. | |
| 0.04" | 0.02" | 0.005" | 18 | Clear Amber | 00000000 | 00000 | |
| 0.05" | 0.03" | 0.005" | 16 | Clear Amber | 0000000 | 0000 | |
| 0.09" | 0.06" | 0.005" | 14 | Clear Amber | 0000000 | 0000 | |
| 0.1" | 0.07" | 0.005" | 12 | Clear Amber | 0000000 | 0000 | |
| 0.13" | 0.09" | 0.005" | 10 | Clear Amber | 0000000 | 00000 | |
| 0.16" | 0.11" | 0.005" | 8 | Clear Amber | 0000000 | 00000 | |
| 0.2" | 0.14" | 0.005" | 6 | Clear Amber | 0000000 | 00000 | |
| 0.25" | 0.18" | 0.005" | 4 | Clear Amber | 0000000 | 00000 | |
| 0.32" | 0.23" | 0.005" | 2 | Clear Amber | 0000000 | 00000 | |
| 0.39" | 0.28" | 0.005" | 1/0 | Clear Amber | 0000000 | 00000 | |