McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    15 Products

    Flame- and Arc-Flash-Protection Jackets

    Image of Product. Front orientation. Jackets. Flame- and Arc-Flash-Protection Jackets.
    These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of a durable aramid/modacrylic blend. They have a flap in the front that conceals the zipper.
    When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.
    Material
    Arc Rating,
    cal/cm²
    Arc-Rated
    PPE Category
    Closure
    Method
    Cuff
    Style
    Flammability Rating
    Color
    Choose a Size (Chest Size)—Length
    Each
    Aramid/Modacrylic Fabric404
    ZipperKnitASTM F1506, NFPA 70E
    Dark BlueS (36")—35", M (38")—35", L (42")—35", XL (44")—35", 2XL (48")—35", 3XL (52")—35"1956T410000000

    Arc-Flash-Protection Clothing Kits

    Image of Product. Front orientation. Contains MultipleImages. Clothing Kits. Arc-Flash-Protection Clothing Kits, Style B.
    Image of Product. Front orientation. Clothing Kits. Arc-Flash-Protection Clothing Kits, Style C.

    Style B

    Style C

    For protection from arc flash hazards, these kits include several of the safety items you may need. All items meet NFPA 70E for protection against flames and electrical arc flashes. Choose clothing that meets the arc rated personal protective equipment (PPE) category required by your workplace.
    When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the protective clothing.
    Style B
    Image of Product. Front orientation. Contains MultipleImages. Clothing Kits. Arc-Flash-Protection Clothing Kits, Style B.
    Style B kits come with coveralls, hard hat, face shield, hood, and two storage bags.
    PPE Category 2—These kits have the most common arc-flash-protection rating for industrial applications.
    Hard Hat
    Face Shield
    Coveralls
    Arc-Rated
    PPE Category
    Arc Rating,
    cal/cm²
    No. of Suspension
    Points
    Material
    Hat
    Size
    Lens
    Material
    Lens
    Ht.
    Lens
    Wd.
    Lens
    Thick.
    Material
    Color
    Includes
    Flammability Rating
    Specs. Met
    Choose a Size (Chest Size)
    Each
    2
    124Polyethylene6 1/2-8Polycarbonate
    12"8"0.09"Cotton/Nylon FabricRed/GrayHard Hat, Hood, Face Shield, Coveralls, Two Storage BagsASTM F1506, NFPA 70E
    ANSI/ISEA Z87.1, ANSI/ISEA Z89.1M (44"), L (48"), XL (52"), 2XL (56"), 3XL (60")2708N20000000
    Style C
    Image of Product. Front orientation. Clothing Kits. Arc-Flash-Protection Clothing Kits, Style C.
    Style C kits come with headgear, a jacket, bib overalls, and two storage bags.
    PPE Category 2—These kits have the most common arc-flash-protection rating for industrial applications.
    Jacket
    Hard Hat
    Face Shield
    Bib Overalls
    Arc-Rated
    PPE Category
    Arc Rating,
    cal/cm²
    Material
    Closure Method
    Cuff
    Style
    No. of Suspension
    Points
    Material
    Hat
    Size
    Lens
    Material
    Lens
    Ht.
    Lens
    Wd.
    Lens
    Thick.
    Material
    Inseam
    Length
    Cuff Style
    Includes
    Flammability Rating
    Specs. Met
    Choose a Size (Chest Size)
    Each
    2
    8Cotton/Nylon FabricHook and Loop, ZipperKnit4Polyethylene6 1/2-8Polycarbonate
    12"8"0.09"Cotton/Nylon Fabric30"Hook and LoopHard Hat, Hood, Jacket, Face Shield, Bib Overalls, Two Storage BagsASTM F1506, NFPA 70E
    ANSI/ISEA Z87.1, ANSI/ISEA Z89.1M (44"), L (48"), XL (52"), 2XL (56")2708N10000000

    Flame- and Arc-Flash-Protection Base Layer Shirts

    Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All base layer materials are lightweight, breathable, and moisture wicking for added comfort.
    They all comply with OSHA 29 CFR 1910.269 standards for flame and arc flash protection.
    When measuring chest size, measure around the fullest part of your chest.
    Men's Clothes
    Image of Product. Front orientation. Shirts. Flame- and Arc-Flash-Protection Base Layer Shirts, Men's Clothes, Short-Sleeve Shirt.
    Image of Product. Front orientation. Shirts. Flame- and Arc-Flash-Protection Base Layer Shirts, Men's Clothes, Long-Sleeve Shirt.

    Short-Sleeve Shirt

    Long-Sleeve Shirt

    Acrylic/Cotton Fabric—Acrylic/cotton base layers are stretchy for increased mobility and range of motion.
    Material
    Arc Rating,
    cal/cm²
    Arc-Rated
    PPE Category
    Cuff
    Style
    Specs. Met
    Flammability Rating
    Color
    Choose a Size (Chest Size)
    Each
    Short-Sleeve Shirt
    Acrylic/Cotton Fabric41
    OpenOSHA Compliant 29 CFR 1910.269
    NFPA 70E, ASTM F1506
    Dark BlueS (34", 36"), M (38", 40"), L (42", 44"), XL (46", 48"), 2XL (50", 52"), 3XL (54", 56")1574N510000000
     
    Long-Sleeve Shirt
    Acrylic/Cotton Fabric41
    KnitOSHA Compliant 29 CFR 1910.269
    NFPA 70E, ASTM F1506
    Dark BlueS (34", 36"), M (38", 40"), L (42", 44"), XL (46", 48"), 2XL (50", 52"), 3XL (54", 56")1574N62000000
     
    Women's Clothes
    Image of Product. Front orientation. Shirts. Flame- and Arc-Flash-Protection Base Layer Shirts, Women's Clothes.
    Material
    Arc Rating,
    cal/cm²
    Arc-Rated
    PPE Category
    Cuff
    Style
    Closure
    Method
    Specs. Met
    Flammability Rating
    Color
    Choose a Size (Chest Size)
    Each
    Long-Sleeve Shirt
    Carbon Fiber Fabric132
    OpenButtonOSHA Compliant 29 CFR 1910.269
    NFPA 70E, NFPA 2112, ASTM F1506
    BrownXS (30", 32"), S (34", 36"), M (38", 40"), L (42", 44"), XL (46", 48"), 2XL (50", 52"), 3XL (54", 56")5122N110000000
     

    Flame- and Arc-Flash-Protection Shirts

    These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms from electrical arc flashes and flames. Choose shirts that meet the arc rated category for your workplace. The higher the arc rating, the greater the flame resistance. These shirts are arc fire protection rated Category 2, the most common rating for industrial applications. Since they’re made of breathable and moisture-wicking materials, you stay cool. They have buttons down the front and on the cuffs, as well as two chest pockets.
    When measuring chest size, measure around the fullest part of your chest.
    Men's Clothes
    Image of Product. Front orientation. Shirts. Flame- and Arc-Flash-Protection Shirts, Men's Clothes.
    Image of Specification. Side1 orientation. ZoomedIn view. Mesh Vents. Flame- and Arc-Flash-Protection Shirts.

    Mesh Vents

    Mesh Vents—Shirts with mesh vents allow cool air in as your shift your shoulders. The vents are hidden on the upper back.
    Arc-Rated
    PPE Category
    Arc Rating,
    cal/cm²
    Closure
    Method
    Cuff
    Style
    Features
    Color
    Choose a Size (Chest Size)
    Each
    Cotton/Nylon Fabric
    2
    9.1ButtonButtonMesh Vents, Two Chest PocketsLight BlueS (38", 40"), M (41", 44"), L (45", 48"), XL (49", 52"), 2XL (53", 56"), 3XL (57", 60")8335N110000000
     
    Acrylic/Buna-N Fabric
    2
    8ButtonButtonTwo Chest PocketsLight BlueS (36", 38"), M (40", 42"), L (44", 46"), XL (48", 50"), 2XL (52", 54"), 3XL (56", 58")1956T31000000
     
    Women's Clothes
    Image of Product. Front orientation. Shirts. Flame- and Arc-Flash-Protection Shirts, Women's Clothes.
    Arc-Rated
    PPE Category
    Arc Rating,
    cal/cm²
    Closure
    Method
    Cuff
    Style
    Features
    Color
    Choose a Size (Chest Size)
    Each
    Acrylic/Buna-N Fabric
    2
    8ButtonButtonTwo Chest PocketsLight BlueS (33", 35"), M (36", 38"), L (39", 41"), XL (42", 44"), 2XL (46", 48"), 3XL (49", 51")1956T710000000
     

    Flame-Resistant Clothing Kits

    Image of Product. Front orientation. Clothing Kits. Flame-Resistant Clothing Kits.
    Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.
    The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in. When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.
    Cannot Be Sold To—Clothing Kits cannot be sold to the listed areas due to chemical regulations.
    Coveralls
    Mask
    Material
    Flammability
    Rating
    Color
    Material
    Flammability
    Rating
    Color
    Size
    Includes
    Cannot Be Sold To
    Choose a Size
    (Chest Size)
    Each
    Aramid/Rayon FabricASTM F1506
    BlackAramid/Rayon FabricASTM F1506
    BrownOne SizeCoveralls, Mask, Storage BagCalifornia, Connecticut, Maine, New York, VermontM (49"), L (52"), XL (56")8480N111000000000

    Flame- and Arc-Flash-Protection High-Visibility Vests

    Image of Product. Front orientation. Vests. Flame- and Arc-Flash-Protection High-Visibility Vests, Class 2 ANSI Visibility Rating, Hook and Loop Closure.
    Image of Product. Front orientation. Vests. Flame- and Arc-Flash-Protection High-Visibility Vests, Class 2 ANSI Visibility Rating, Zipper Closure.

    Class 2 ANSI

    Visibility Rating,

    Hook and Loop Closure

    Class 2 ANSI

    Visibility Rating,

    Zipper Closure

    Image of Specification. Fluorescent Yellow (Mesh). Front orientation. Fluorescent Yellow. Flame- and Arc-Flash-Protection High-Visibility Vests, Mesh.

    Fluorescent

    Yellow

    (Mesh)

    Image of Specification. Fluorescent Yellow (Solid). Front orientation. Contains Border. Fluorescent Yellow. Flame- and Arc-Flash-Protection High-Visibility Vests, Solid.

    Fluorescent

    Yellow

    (Solid)

    PPE Category 1—Vests that are rated PPE Category 1 provide light protection against arc flashes. Made of mesh acrylic, these vests are self-extinguishing. They are stitched with Nomex thread for added durability. They have hook and loop closures down the front and one waist pocket.
    PPE Category 4—Vests that are rated PPE Category 4 provide the highest level of protection from arc flashes. Rated NFPA 2112, they also protect against flash fires. They’re made of modacrylic/aramid which is more durable and flame resistant than acrylic vests. You’ll stay dry thanks to the water-resistant coating. These vests have a lightweight and breathable cotton liner for added comfort. They have a zipper down the front, one chest pocket, and two waist pockets.
    NFPA 70E—Vests are rated NFPA 70E to protect your torso against flames and arc flash.
    ANSI/ISEA 107—These vests meet ANSI/ISEA 107, so they've passed tests for visibility at high speeds and distances. That means you'll be seen by fast-moving vehicles or from across the shop floor.
    Fluorescent Yellow—These vests are fluorescent yellow with reflective stripes, so you’ll stand out in risky areas with low visibility.
    Arc-Rated PPE Category—Choose a vest that meets the arc rated personal protective equipment (PPE) category required by your workplace.
    Arc Rating—The higher the arc rating, the greater the flame resistance. Wear these vests over flame-and arc-flash rated long-sleeve shirts or sweatshirts to meet the specified arc rating.
    Chest Size—When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.
    Arc-Rated
    PPE Category
    Arc Rating,
    cal/cm²
    ANSI Visibility
    Rating
    Material
    Construction
    Closure
    Method
    Flammability Rating
    Specs. Met
    Features
    Color
    Choose a Size (Chest)
    Each
    1
    5.1Class 2Acrylic FabricMeshHook and LoopNFPA 70E, ASTM F1506
    ANSI/ISEA 107One Waist PocketFluorescent YellowM (36"/38"), L (40"/42"), XL (44"/46"), 2XL (48"/50"), 3XL (52"/54"), 4XL (56"/58"), 5XL (60"/62")8324T27000000
    4
    45Class 2Cotton, Aramid/Modacrylic FabricSolidZipperNFPA 70E, NFPA 2112, ASTM F1506
    ANSI/ISEA 107One Chest Pocket, Two Waist PocketsFluorescent YellowM (40"), L (44"), XL (48"), 2XL (50"), 3XL (52")8324T201000000

    Flame- and Arc-Flash-Protection Cooling Vests

    Image of Product. Front orientation. Vests. Flame- and Arc-Flash-Protection Cooling Vests.
    Keep your core cool while staying protected from flames and arc flash.
    Hook and Loop Closure—They have adjustable hook and loop closures at the shoulders and waist for a comfortable fit.
    NFPA 70E—Made with a flame-resistant fabric, these vests meet Category 1 NFPA 70E standards to provide light protection against arc flashes.
    Reflective Accents—When worn over other clothes, these vests have reflective accents to help you stand out in low-visibility conditions.
    Two Cooling Packs—These vests hold cooling packs in the front and back, so they’ll stay a comfortable 64° F for up to four hours. Reuse the cooling packs as many times as you want by chilling them in a freezer, fridge, or in front of an air conditioner.
    Arc-Rated PPE Category—Check the PPE category provided for your workplace and select all required clothing and personal protective equipment to meet that rating.
    Arc Rating—Check the minimum arc rating provided for your workplace and select all required clothing and personal protective equipment to meet that rating.
    Chest Size—When measuring chest size, measure around the fullest part of your chest. Take all measurements over any garments you expect to wear under the protective clothing.
    Vests
    Replacement
    Cooling Pack Sets
    Arc-Rated
    PPE Category
    Arc Rating,
    cal/cm²
    Material
    Cooling
    Time, hr.
    Closure
    Method
    Flammability Rating
    Features
    Color
    Choose a Size (Chest)
    Each
    Wt.,
    lb.
    Includes
    Each
    1
    7.1Cotton/Modacrylic Fabric4Hook and LoopNFPA 70E, ASTM F1506
    Reflective Accents, Two Cooling PacksBrownS/M (32"/34"/36"/38"/40"), L/XL (40"/42"/44"/46"/48"/50"/52")8671N1100000004Two Cooling Packs8671N140000000

    High-Visibility Flame- and Arc-Flash-Protection Shirts

    Image of Product. Front orientation. Shirts. High-Visibility Flame- and Arc-Flash-Protection Shirts.
    Image of Specification. Side1 orientation. ZoomedIn view. Mesh Vents. High-Visibility Flame- and Arc-Flash-Protection Shirts.

    Mesh Vents

    Stay visible—even in dim light—and shielded from flames and arc flash hazards. These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms against flash fire and electrical arc flashes. Choose shirts that meet the arc rated category required by your workplace. These shirts are rated Category 2, the most common rating for industrial applications. Bright in color and decked out with reflective strips, these shirts meet Class 3 ANSI/ISEA 107 to make you visible from a ¼ mile away. Use them around moving vehicles, on busy shop floors, and when operating machinery.
    Made of cotton/nylon blend, these shirts are breathable and moisture wicking, so you won’t get too hot. They have concealed mesh vents on the back that let air in and keep you cool as you move.
    When measuring chest size, measure around the fullest part of your chest.
    Material
    Arc Rating,
    cal/cm²
    Arc-Rated
    PPE Category
    ANSI Visibility
    Rating
    Cuff
    Style
    Closure
    Method
    Specs. Met
    Flammability Rating
    Features
    Color
    Choose a Size (Chest Size)
    Each
    Long-Sleeve Shirt
    Cotton/Nylon Fabric8.92
    Class 3ButtonButtonANSI/ISEA 107NFPA 70E, NFPA 2112, ASTM F1506
    Mesh Vents, Two Chest PocketsFluorescent YellowS (38", 40"), M (41", 44"), L (45", 48"), XL (49", 52"), 2XL (53", 56"), 3XL (57", 60")8348N110000000
     
    back to top