Flame- and Arc-Flash-Protection Coats
These coats meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These coats are made of breathable cotton and are self-extinguishing. They have a flap in the front that conceals the snaps.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.
Available Sizes | ||
|---|---|---|
| Size | Chest Size | Length |
| M | 42", 44" | 42" |
| L | 46", 48" | 42" |
| XL | 50", 52" | 42" |
| 2XL | 54", 56" | 42 1/2" |
| 3XL | 58", 60" | 43" |
Flame- and Arc-Flash-Protection Sweatshirts
These sweatshirts meet NFPA 70E and NFPA 2112 standards to protect your upper body against electrical arc flashes and flames. With a rib knit waistband and cuffs that stretch for a snug fit, these sweatshirts shield your skin from hazards. The zipper is covered to create a barrier against flames. Choose a sweatshirt that meets the arc rated PPE category required by your workplace. The higher the arc rating, the greater the flame resistance. These sweatshirts are rated Category 2, the most common protection rating for standard industrial applications.
Made of blended fleece, they’re comfortable and keep you warm.
Sweatshirts cannot be sold to the listed areas due to product regulations.
High-Visibility Flame- and Arc-Flash-Protection Sweatshirts
The fluorescent yellow fabric and reflective stripes on these sweatshirts make you stand out. They meet Class 3 ANSI/ISEA 107 standards for high-visibility clothing, so you’ll be seen from ¼ mile away. These sweatshirts also meet Category 3 NFPA 70E and NFPA 2112 for moderate protection against flames and electrical arc flashes. Made with a modacrylic/aramid blend, these sweatshirts are both durable and comfortable. To help prevent body heat from escaping, they have snug knit cuffs and a snug knit waistband. Keep your hands warm in the exterior pocket. They have an interior pocket for storage.
When choosing clothing to protect you from arc flashes, match the arc rated personal protective equipment (PPE) category required by your workplace.
Available Sizes | |
|---|---|
| Size | Chest Size |
| M | 38" |
| L | 41" |
| XL | 45" |
| 2XL | 50" |
| 3XL | 54" |
| Arc Rated PPE Category  | Arc Rating, cal/cm2 | Visibility Rating | Material | Cuff Style | Specifications Met | Features | Color | Choose a Size | Each | |
| 3 | 27 | ANSI Class 3 | Modacrylic/Aramid Fabric Blend | Knit | NFPA 70E, NFPA 2112, ANSI/ISEA 107 | Knit Waistband, One Waist Pocket, One Inside Pocket | Fluorescent Yellow | 00000000 | 0000000 |
Flame- and Arc-Flash-Protection Base Layers
Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All base layer materials are lightweight, breathable, and moisture wicking for added comfort.
They all comply with OSHA 29 CFR 1910.269 standards for flame and arc flash protection.
When measuring chest size, measure around the fullest part of your chest.
Available Women's Sizes | |
|---|---|
| Size | Chest Size |
| XS | 30"/32" |
| S | 34"/36" |
| M | 38"/40" |
| L | 42"/44" |
| XL | 46"/48" |
| 2XL | 50"/52" |
| 3XL | 54"/56" |
Flame- and Arc-Flash-Protection Shirts
These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms from electrical arc flashes and flames. Choose shirts that meet the arc rated category for your workplace. The higher the arc rating, the greater the flame resistance. These shirts are arc fire protection rated Category 2, the most common rating for industrial applications. Since they’re made of breathable and moisture-wicking materials, you stay cool. They have buttons down the front and on the cuffs, as well as two chest pockets.
When measuring chest size, measure around the fullest part of your chest.
Shirts with mesh vents allow cool air in as your shift your shoulders. The vents are hidden on the upper back.
Available Men's Sizes | |
|---|---|
| Size | Chest Size |
Cotton/Nylon Fabric Blend | |
| S | 38"/40" |
| M | 41"/44" |
| L | 45"/48" |
| XL | 49"/52" |
| 2XL | 53"/56" |
| 3XL | 57"/60" |
Acrylic/Buna-N Fabric Blend | |
| S | 36"/38" |
| M | 40"/42" |
| L | 44"/46" |
| XL | 48"/50" |
| 2XL | 52"/54" |
| 3XL | 56"/58" |
Available Women's Sizes | |
|---|---|
| Size | Chest Size |
Acrylic/Buna-N Fabric Blend | |
| S | 33"/35" |
| M | 36"/38" |
| L | 39"/41" |
| XL | 42"/44" |
| 2XL | 46"/48" |
| 3XL | 49"/51" |
High-Visibility Flame- and Arc-Flash-Protection Shirts
Stay visible—even in dim light—and shielded from flames and arc flash hazards. These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms against flash fire and electrical arc flashes. Choose shirts that meet the arc rated category required by your workplace. These shirts are rated Category 2, the most common rating for industrial applications. Bright in color and decked out with reflective strips, these shirts meet Class 3 ANSI/ISEA 107 to make you visible from a ¼ mile away. Use them around moving vehicles, on busy shop floors, and when operating machinery.
Made of cotton/nylon blend, these shirts are breathable and moisture wicking, so you won’t get too hot. They have concealed mesh vents on the back that let air in and keep you cool as you move.
When measuring chest size, measure around the fullest part of your chest.
Available Sizes | |
|---|---|
| Size | Chest Size |
| S | 38"/40" |
| M | 41"/44" |
| L | 45"/48" |
| XL | 49"/52" |
| 2XL | 53"/56" |
| 3XL | 57"/60" |
| Arc Rated PPE Category | Arc Rating, cal/cm2 | Visibility Rating | Material | Closure Type | Cuff Style | Specifications Met | Features | Color | Choose a Size | Each | |
| 2 | 8.9 | ANSI Class 3 | Cotton/Nylon Fabric Blend | Button | Button | NFPA 70E, NFPA 2112, ANSI/ISEA 107, ASTM F1506 | Mesh Vents, Two Chest Pockets | Fluorescent Yellow | 0000000 | 0000000 |
Flame- and Arc-Flash-Protection High-Visibility Vests
These vests are fluorescent yellow with reflective stripes, so you’ll stand out in risky areas with low visibility. They're rated NFPA 70E to protect your torso against flames and arc flash. These vests meet ANSI/ISEA 107, so they've passed tests for visibility at high speeds and distances. That means you'll be seen by fast-moving vehicles or from across the shop floor.
Choose a vest that meets the arc rated personal protective equipment (PPE) category required by your workplace. The higher the arc rating, the greater the flame resistance. Wear these vests over flame-and arc-flash rated long-sleeve shirts or sweatshirts to meet the specified arc rating.
Vests that are rated PPE Category 4 provide the highest level of protection from arc flashes. Rated NFPA 2112, they also protect against flash fires. They’re made of modacrylic/aramid which is more durable and flame resistant than acrylic vests. You’ll stay dry thanks to the water-resistant coating. These vests have a lightweight and breathable cotton liner for added comfort. They have a zipper down the front, one chest pocket, and two waist pockets.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.
Available Sizes | |
|---|---|
| Size | Chest Size |
Cotton, Modacrylic/Aramid Fabric Blend | |
| M | 40" |
| L | 44" |
| XL | 48" |
| 2XL | 50" |
| 3XL | 52" |
Flame- and Arc-Flash-Protection Vests
These vests meet NFPA 70E and NFPA 2112 to protect your torso against arc flash and flash fire. They are rated Category 3 to provide moderate protection when worn over a flame- and arc-flash rated long-sleeve shirt or sweatshirt. Made of Nomex aramid fabric, these vests are flame resistant and they also resist wear and abrasion. A flap covers the snaps, so they won't scratch equipment or heat up if there's a fire. These vests have a fleece lining to keep you warm.
Choose a vest that meets the arc rated personal protective equipment (PPE) category required by your workplace. The higher the arc rating, the greater the flame resistance.