Coast Guard approved—these jackets keep you warm and double as a life vest. They have built-in foam for buoyancy, so you can work near water without the bulk of your typical flotation device. A fleece liner keeps you warm and a nylon shell and frontal storm flap block out rain and wind. The sleeves stay snug on your wrists thanks to neoprene inner cuffs and hook and loop outer cuffs. Should you need it, a mesh liner helps drain trapped water.

With bright colors and reflective stripes, these jackets make you stand out in emergencies. They meet ANSI/ISEA 107, so they've passed tests for visibility at high speeds and distances.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Stand out in low-visibility areas with these brightly colored, reflective coats. They’re longer and more insulated than high-visibility jackets to keep you warm in temperatures as low as -50°F. Made of nylon, they have a wind- and water-resistant outer shell, with a layer of polyester insulation for added warmth. A storm flap snaps shut over the zipper to keep out wind and cold. Knit cuffs trap heat and hold sleeves in place. These coats meet Class 2 ANSI/ISEA 107 standards for workers who are on or near roadways.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.

Rain, rain, you can stay—these two-piece suits will keep your entire body dry in wet conditions. All suits include a hooded jacket and pants or bib overalls.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

The fluorescent yellow fabric and reflective stripes on these sweatshirts make you stand out. They meet Class 3 ANSI/ISEA 107 standards for high-visibility clothing, so you’ll be seen from ¼ mile away. These sweatshirts also meet Category 3 NFPA 70E and NFPA 2112 for moderate protection against flames and electrical arc flashes. Made with a aramid/modacrylic blend, these sweatshirts are both durable and comfortable. To help prevent body heat from escaping, they have snug knit cuffs and a snug knit waistband. Keep your hands warm in the exterior pocket. They have an interior pocket for storage.

When choosing clothing to protect you from arc flashes, match the arc rated personal protective equipment (PPE) category required by your workplace.

Keep dry in wet and rainy conditions. These jackets have a storm flap that covers the snaps down the front. They’re washable and resist tears.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Use these kits for head-to-toe protection from chemical spills and splashes. They come with everything you need to avoid contact with acetone, gasoline, and other harsh substances.

Shield your torso, face, and hands from extremely cold materials, such as liquid nitrogen and dry ice. These kits include a cryogenic apron and gloves that withstand temperatures as cold as -320° F. Made of Cordura nylon fabric, the aprons are waterproof and resist cuts. They have adjustable neck and waist straps with buckles for quick removal. A breathable liner in the nylon gloves wicks moisture. Their open cuff design lets you easily slip them on and off. These kits also have a polycarbonate face shield that blocks splashes and won’t easily crack if dropped. Unlike standard face shields, these shields won’t fog up when cold liquids splash them. The face shield has a ratchet adjustment in the back and a pinlock adjustment in the front, so you can get a comfortable fit.

Coats extend past your knees to keep you dry in wet and rainy conditions. They have snaps down the front with a storm flap to help keep rain out. Made of durable material, they resist tears. They’re also washable.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.

Protect your torso, hands, and eyes from sparks, spatter, and heat in welding areas. Each of these kits come with basic safety gear, common welding accessories, and a four-gallon bucket for easy gear transport. The included jacket protects against low radiant heat, with leather sleeves for added heat protection and cut resistance. Three pairs of gloves—one for TIG welding, one for stick welding, and one pair of standard leather work gloves—ensure you have the hand protection you need. These kits also come with two pairs of glasses: shaded ones to guard from harmful infrared light, plus a pair of standard safety glasses. When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.

Stand out and keep your core insulated in temperatures as frigid as -50° F.

Stay visible—even in dim light—and shielded from flames and arc flash hazards. These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms against flash fire and electrical arc flashes. Choose shirts that meet the arc rated category required by your workplace. These shirts are rated Category 2, the most common rating for industrial applications. Bright in color and decked out with reflective strips, these shirts meet Class 3 ANSI/ISEA 107 to make you visible from a _¼ mile away. Use them around moving vehicles, on busy shop floors, and when operating machinery.

Made of cotton/nylon blend, these shirts are breathable and moisture wicking, so you won’t get too hot. They have concealed mesh vents on the back that let air in and keep you cool as you move.

When measuring chest size, measure around the fullest part of your chest.

Stay visible and bite-free—these fluorescent shirts are coated in permethrin to cause ticks, mosquitoes, and other bugs to go haywire before they bite you. To help you stand out in places that are dusty, cloudy, or dimly lit, they are bright yellow and have reflective stripes. They meet Class 3 ANSI/ISEA 107 standards for people who need to be visible from at least a _1/4 of a mile away. Made of polyester, they're lightweight and moisture wicking, keeping you cool and dry. Product regulations restrict sales to the listed areas.

Stay visible even in dirty working conditions—these shirts are coated to resist oil, grease, and antifreeze. Thanks to their fluorescent yellow fabric and reflective stripes, they meet Class 2 ANSI/ISEA 107. This means that when you wear them, you'll be seen from across the shop floor or from moving vehicles. To keep you cool, they’re made of a moisture-wicking polyester/cotton blend. A mesh panel on the upper back increases air flow for even more cooling, and it stretches as you move. The snaps are hidden to keep them from scratching equipment while you work. These shirts have a UPF 40 rating, so they block up to 98% of UV rays to shield your skin.

When measuring chest size, measure around the fullest part of your chest.

Keep cool and be seen—these vests protect you from the heat and help you stand out when visibility is low.