Jacobs Taper-Mount Keyless Drill Chucks
A self-tightening design causes these chucks to grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They require an arbor (sold separately).
For Bit Shank Size | Jacobs Taper | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Number | Drive Type | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Jacobs | |||||||||
| 0.012"-0.255" | 0.3-6.5 | 1 | Standard | Steel | Steel | 20,000 | JKP 65-J1 | 2844A49 | 0000000 |
| 0.012"-0.315" | 0.3-8 | 2S | Standard | Steel | Steel | 15,000 | JKP 80-J2S | 2844A51 | 000000 |
| 0.02"-0.394" | 0.5-10 | 2 | Standard | Steel | Steel | 12,000 | JKP 100-J2 | 2844A52 | 000000 |
| 0.02"-0.394" | 0.5-10 | 33 | Standard | Steel | Steel | 12,000 | JKP 100-J33 | 2844A53 | 000000 |
| 0.039"-0.512" | 1-13 | 2 | Standard | Steel | Steel | 7,000 | JKP 130-J2 | 2844A54 | 000000 |
| 0.039"-0.512" | 1-13 | 6 | Standard | Steel | Steel | 7,000 | JKP 130-J6 | 2844A56 | 000000 |
| 0.039"-0.512" | 1-13 | 33 | Standard | Steel | Steel | 7,000 | JKP 130-J33 | 2844A55 | 000000 |
| 0.118"-0.63" | 3-16 | 6 | Standard | Steel | Steel | 4,000 | JKP 160-J6 | 2844A57 | 000000 |
Extra-Grip Jacobs Taper-Mount Keyless Drill Chucks
Use the included spanner wrench to tighten the chuck for up to three times the gripping torque of hand tightening. These chucks grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They require an arbor (sold separately).
For Bit Shank Size | Jacobs Taper | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Number | Drive Type | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Jacobs | |||||||||
| 0"-0.255" | 0-6.5 | 1 | Standard | Steel | Steel | 10,000 | JKT 65-J1 | 28305A59 | 0000000 |
| 0.039"-0.512" | 1-13 | 2 | Standard | Steel | Steel | 7,000 | JKT 130-J2 | 28305A62 | 000000 |
| 0.039"-0.512" | 1-13 | 6 | Standard | Steel | Steel | 7,000 | JKT 130-J6 | 28305A64 | 000000 |
| 0.039"-0.512" | 1-13 | 33 | Standard | Steel | Steel | 7,000 | JKT 130-J33 | 28305A63 | 000000 |
| 0.118"-0.63" | 3-16 | 6 | Standard | Steel | Steel | 4,000 | JKT 160-J6 | 28305A65 | 000000 |
Albrecht Taper-Mount Keyless Drill Chucks
A self-tightening design causes these chucks to grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They require an arbor (sold separately).
Also Available: Replacement hoods, ball bearing sets, collars, jaws sets, jaw guides, shells, drive pins, and body and spindle assemblies. Select 2825A6 and specify replacement part and Albrecht model number.
For Bit Shank Size | Jacobs Taper | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Number | Drive Type | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Albrecht | |||||||||
| 0.008"-1/16" | 0-1.5 | 0 | Standard | Steel | Steel | 50,000 | C15-J0 | 2823A11 | 0000000 |
| 0.015"-1/8" | 0-3 | 0 | Standard | Steel | Steel | 35,000 | C30-J0 | 2823A12 | 000000 |
| 0.015"-1/8" | 0-3 | 1 | Standard | Steel | Steel | 35,000 | C30-J1 | 2823A13 | 000000 |
| 0.015"-1/4" | 0-6.5 | 1 | Standard | Steel | Steel | 20,000 | C65-J1 | 2823A15 | 000000 |
| 0.015"-3/8" | 0-10 | 2 | Standard | Steel | Steel | 12,000 | C100-J2 | 2823A18 | 000000 |
| 0.015"-3/8" | 0-10 | 33 | Standard | Steel | Steel | 12,000 | C100-J33 | 2823A17 | 000000 |
| 1/32"-1/2" | 1-13 | 2 | Standard | Steel | Steel | 7,000 | C130-J2 | 2823A21 | 000000 |
| 1/32"-1/2" | 1-13 | 6 | Standard | Steel | Steel | 7,000 | C130-J6 | 2823A22 | 000000 |
| 1/32"-1/2" | 1-13 | 33 | Standard | Steel | Steel | 7,000 | C130-J33 | 2823A19 | 000000 |
| 1/8"-5/8" | 3-16 | 6 | Standard | Steel | Steel | 4,000 | C160-J6 | 2823A23 | 000000 |
| For Manufacturer Model Number | Each | |
Albrecht | ||
|---|---|---|
Ball Bearing Set | ||
| C15-J0 | 2825A83 | 000000 |
| C30-J0, C30-J1 | 2825A84 | 00000 |
| C65-J1 | 2825A86 | 00000 |
| C100-J2, C100-J33 | 2825A88 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A12 | 00000 |
| C160-J6 | 2825A13 | 00000 |
Body and Spindle Assembly | ||
| C15-J0 | 2825A62 | 000000 |
| C30-J0, CH30-J0 | 2825A63 | 000000 |
| C30-J1 | 2825A64 | 000000 |
| C65-J1 | 2825A19 | 000000 |
| C100-J2 | 2825A68 | 000000 |
| C100-J33 | 2825A67 | 000000 |
| C130-J2 | 2825A22 | 000000 |
| C130-J6 | 2825A23 | 000000 |
| C130-J33 | 2825A21 | 000000 |
| C160-J6 | 2825A24 | 000000 |
Collar | ||
| C15-J0 | 2825A43 | 000000 |
| C30-J0, C30-J1 | 2825A4 | 000000 |
| C65-J1 | 2825A46 | 00000 |
| C100-J2, C100-J33 | 2825A48 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A14 | 00000 |
| C160-J6 | 2825A15 | 00000 |
Drive Pin | ||
| C15-J0 | 2825A01 | 00000 |
| C30-J0, C30-J1 | 2825A02 | 00000 |
| C65-J1 | 2825A04 | 00000 |
| C100-J2, C100-J33 | 2825A06 | 00000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A07 | 00000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A08 | 00000 |
Hood | ||
| C15-J0 | 2825A49 | 000000 |
| C30-J0, C30-J1 | 2825A51 | 000000 |
| C65-J1 | 2825A53 | 000000 |
| C100-J2, C100-J33 | 2825A56 | 000000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A11 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A57 | 000000 |
Jaw Guide | ||
| C15-J0 | 2825A25 | 000000 |
| C30-J0, C30-J1 | 2825A26 | 000000 |
| C65-J1 | 2825A28 | 000000 |
| C100-J2, C100-J33 | 2825A16 | 000000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A17 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A18 | 000000 |
Jaw Set | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A77 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A78 | 000000 |
Shell | ||
| C15-J0 | 2825A91 | 00000 |
| C30-J0, C30-J1 | 2825A92 | 00000 |
| C65-J1 | 2825A94 | 00000 |
| C100-J2, C100-J33 | 2825A96 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A97 | 00000 |
| C160-J6 | 2825A98 | 00000 |
Thread-Mount Keyless Drill Chucks
Switch between drilling and driving bits in seconds. These keyless chucks require only a quick twist of their sleeve to lock and release bits. Most often used in hand-held power drills, they're a great choice for most drilling and fastening jobs, including low-torque, high-speed drilling in soft or thin materials.
Economy chucks are best for occasional drilling. They are a cost-effective upgrade from the one that comes on your hand-held power drill.
Chucks with a ratchet lock have teeth that tightly grip bits for drilling in both directions, even under high torque and vibration. The ratcheting mechanism makes it easy to tighten and release bits.
For Bit Shank Size | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mounting Hole Thread Size  | Inch | mm | Max. No-Load Speed | TIR (Total Indicated Runout) Accuracy | Jaw Material | Body Material | For Use With | For Tool Drive Direction | Features | Manufacturer Model Number | Each | |
Economy—Jacobs | ||||||||||||
| 3/8"-24 | 1/16"-3/8" | 1.5-10 | Not Rated | Not Rated | Steel | Steel | Hand-Held Power Drills | Clockwise, Counterclockwise | Ratchet Lock | 30354 | 28165A32 | 000000 |
| 3/8"-24 | 1/16"-1/2" | 1.5-13 | Not Rated | Not Rated | Steel | Steel | Hand-Held Power Drills | Clockwise, Counterclockwise | Ratchet Lock | 31037 | 28165A37 | 00000 |
| 1/2"-20 | 1/16"-1/2" | 1.5-13 | Not Rated | Not Rated | Steel | Steel | Hand-Held Power Drills | Clockwise, Counterclockwise | Ratchet Lock | 31038 | 28165A42 | 00000 |
Hex-Shank Drill Chucks for Power Screwdrivers and Impact Drivers
Adapt your power screwdriver, impact driver, or other hex-shank drive tool into a drill. These chucks have a 1/4" hex shank that slots into your tool’s hex drive. They’re also known as adapt-a-drive chucks.
Keyless chucks let you swap bits in and out with a quick twist of the sleeve. These chucks have a ratchet lock that secures bits tightly and absorbs vibration to prevent the jaws from loosening.
Jacobs chucks are the most widely used drill chucks.
For Bit Shank Size | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mount Type | Inch | mm | Wt., lbs. | Jaw Material | Body Material | For Use With | For Tool Drive Direction | Features | Manufacturer Model Number | Each | |
Keyless | |||||||||||
Jacobs | |||||||||||
| 1/4" Hex Shank | 1/16"-3/8" | 1.5-10 | 0.6 | Steel | Steel | Power Screwdrivers, Impact Drivers | Clockwise, Counterclockwise | Ratchet Lock | 31248 | 28055A72 | 000000 |