These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place. About half the strength of medium-strength steel thin nuts, use them for light duty fastening applications, such as securing access panels.

Black-oxide steel nuts have a dark surface color and are mildly corrosion resistant in dry environments.

For technical drawings and 3-D models, click on a part number.

These nuts have good chemical resistance and may be mildly magnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They have good chemical resistance and may be mildly magnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These nuts have excellent chemical resistance and can be used in saltwater environments. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

With threads that tighten to the left and made of 316 stainless steel, these nuts won’t loosen from counterclockwise motion in saltwater and corrosive environments. They’re half the height of standard hex nuts, so they fit where there’s low clearance. Sometimes called jam nuts, you can also jam them against standard nuts to hold them in place when fastening machines and equipment.

For technical drawings and 3-D models, click on a part number.

These nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. Also known as jam nuts, they are about half the height of standard hex nuts. Use them in low-clearance applications or jam one against another nut to hold it in place.

For technical drawings and 3-D models, click on a part number.

These locknuts are about half the height of standard nylon-insert locknuts. Use them in light duty low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use.

Zinc-plated steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Half the height of standard nylon-insert locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. They have a nylon insert that grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Made from Grade 8 steel, they're about 25% stronger than medium-strength steel thin locknuts.

Black-oxide steel locknuts nuts mildly resist corrosion in dry environments and have a dark surface color.

Zinc- and zinc yellow-chromate plated steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Half the height of standard nylon-insert locknuts, use these locknuts in low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. These nuts are suitable for fastening most machinery and equipment when used in conjunction with a standard hex nut. All have a finish that resists corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

These locknuts have good chemical resistance and may be mildly magnetic. They're about half the height of standard nylon-insert locknuts. Use them in low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use.

For technical drawings and 3-D models, click on a part number.

About half the height and 10% wider than standard nylon-insert locknuts, these locknuts are often referred to as thin heavy locknuts. Use them in low-clearance applications or jam one against a heavy hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Comparable in strength to Grade 8 bolts, these locknuts are about three times stronger than the same locknut made with low-strength steel.

Black-phosphate steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

About two-thirds the height of standard flex-top locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. Threads at the top of the nut expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts. The strength of the bolt should match the strength of the nut to prevent damaging threads. These locknuts have equivalent strength to Grade 8 steel locknuts.

Plain steel locknuts are uncoated and ready for painting.

Cadmium-plated locknuts are corrosion resistant in wet environments. The plating adds lubricity so they thread on smoothly.

For technical drawings and 3-D models, click on a part number.

About two-thirds the height of standard steel-insert locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. When installed, the steel insert grips the threads and lifts away from the nut body, isolating the insert from the nut’s load to resist spinoff caused by vibration. They're often used in shakers and vibrating equipment. The strength of the bolt should match the strength of the nut to prevent damaging threads. Made from Grade 8 steel, these nuts are suitable for fastening most machinery and equipment.

For technical drawings and 3-D models, click on a part number.