McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    5 Products

    Thin-Profile Hex Nuts

    About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 3/8"-6
    		2 1/16"25/32"SAE Grade 5
    		ASME B18.2.21000000000000000
     
    High-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    1 3/8"-6
    		2 1/16"25/32"SAE Grade 8
    		ASME B18.2.21000000000000000
     
    Steel
    1 3/8"-6
    		2 1/16"25/32"SAE Grade 8
    		ASME B18.2.2100000000000000
     

    Thin-Heavy-Profile Hex Nuts

    About half the height of standard-profile hex nuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Extreme-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Heavy-Profile Hex Nuts.
    These nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Steel
    1 3/8"-6
    		2 3/16"25/32"ASTM Grade 2H
    		ASME B18.2.2, ASTM A194100000000000000
     

    Thin-Profile Nylon-Insert Locknuts

    About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Low-Strength Steel
    Image of Product. Front orientation. Locknuts. Thin-Profile Nylon-Insert Locknuts.
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 3/8"-6
    		2"51/64"220100000000000000
     
    back to top