A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Use where high loads and speeds are not required.

Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

An aluminum shell adds strength.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.

The oil in these bearings is suitable for incidental contact with food.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

A reliable classic—these babbitt bearings are strong and corrosion resistant.