Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

View all sides of your installed components.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Small and lightweight, these enclosures are used with sensors, switches, and testing devices.

Keep electronics safe from harmful contact with hands and tools while still allowing air and moisture to enter.

These enclosures have internal slots to hold circuit boards in place.

Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.

Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.

Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.

Inspect components without opening the cover.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.

Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.

Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.

Control access to these enclosures with a key-operated lock.

Inspect components without opening the cover.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.

Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.

House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.

For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.

The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.

A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.

These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.

These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.

Close off unused outlets.

These boxes come ready to use with receptacles and/or light switches installed.

Knockouts allow you to modify these boxes to fit your application.

Add depth to your switch box.

Knockouts allow you to modify these boxes to fit your application.

Add depth to octagonal outlet boxes.

Knockouts allow you to modify these boxes to fit your application.

Close off unused outlets.

Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Protect the edges of carpet surrounding your outlet boxes.

Use the built-in connections to attach conduit without using fittings.

Close off unused outlets.

These boxes have an open back to accommodate extra-deep low-voltage devices.

Build your own outlet box or replace a damaged box.

Close off unused outlets.

These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.

These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.

Add depth to your weatherproof outlet box.

House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.

Mount servers, automation controls, and computers in these open racks, they make it easy to organize and swap out components. Less bulky than electronics cabinets, you can line up these racks to maximize limited storage space. All are compatible with standard 19" wide components.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.