We will reply to your message within an hour.
Internal mounting bosses enable you to attach panels or DIN rail inside the enclosures using self-tapping screws. Made of polycarbonate, these nonconductive enclosures resist denting, chipping, and cracking.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.
Aluminum enclosures are a lightweight yet durable alternative to stainless steel.
These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.
Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.
PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.
Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.
With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.
Mounting feet make attachment to machines and walls hassle-free.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.
Fiberglass enclosures are stronger than polycarbonate enclosures and nonconductive.
Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.
View all sides of your installed components.
Control access to these enclosures with a key-operated lock.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.
Holes in the cover allow easy installation of push buttons, switches, and indicating lights.
Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.
These enclosures have internal slots to hold circuit boards in place.
With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.
Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.
Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.
Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.
Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.
Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.
Inspect components without opening the cover.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.
Check on the contents inside these enclosures from every angle without opening them in wet environments.
Mount these enclosures directly to machine control panels in wet environments and view the contents without opening them.
These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.
Two separate chambers allow you to access wiring connections in the lower section without disturbing components that you install in the upper section.
Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.
These enclosures are rated NEMA 4 for protection from dirt and washdowns.
No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.
With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.
Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.
UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.
For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.
These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.
House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.
Often used to house emergency-stop buttons, switches, and lights, these bright yellow enclosures are easy to spot, even in dimly lit areas. All have standard-size push-button holes to save time—no need to measure and cut your own holes.
Protect tablet computers, touch displays, and readouts in these specially sized enclosures. They are rated IP65 for protection from spraying water.
The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.
These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.
Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.
Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.
Protect monitors and televisions from environmental damage with these enclosures.
These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.
Rated NEMA 12 for protection from dirt and oil/coolant dripping.
Build out human-machine interfaces by installing buttons, switches, gauges, and other components to monitor and control machinery.
Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.
Add a secondary panel that swings to mount more components in your enclosure.
Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.
Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.
Inspect the terminal block and wiring without opening the cover.
For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.
Also known as junction and summing boxes, these hubs combine the measurements of multiple tension and compression force sensors together.