The wire retainer snaps closed to secure the pin for a one-piece alternative to a clevis and cotter pin combination. Also known as PTO pins.

The low-profile head on these pins holds them in place on one side.

Also known as universal clevis pins, these pins have holes on 1/4" centers so you can change the length by moving the cotter pin.

The bend makes these pins easy to insert and pull out.

A plastic-coated T-handle welded to these pins makes them easy to grab.

Sized to fit snugly around pipe and tube, these pins use spring force to keep the retainer closed.

For the fastest installation, push these pins into a hole and a spring-loaded wedge pops out to lock them in place. Also known as slic pins.

Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

These one-piece fasteners lock in place with a toggle. Flip the toggle to release the pin.

Also known as hitch pin clips and R-clips, these pins are easy to install and remove.

Also known as split pins, these have one prong slightly longer than the other so they’re easy to open. Bend prongs outward to secure.

Also known as safety pins, these are easy to install and remove. Tension keeps them closed.

Also known as key rings, twist these rings into place to secure clevis pins, connect components, or add a pull handle. They don't have the sharp ends of other cotter pins.

Twist these rings on to lock pins in place. They don't have the sharp ends of other cotter pins.

For parts that spin or are otherwise difficult to access, slide these pins in and tap them with a hammer for a temporary hold. Reposition work, then bend the prongs outward to secure.

The smooth ring handle on these pins won't catch on parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

Add a knob or handle to the threaded shank. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A bright-orange plastic-coated handle makes these pins easy to see and easy to grip. Pins have a spring-loaded ball that pops out when the pin is pushed into a hole, and retracts when the pin is pulled out.

A high-profile knob is easy to grip, but fits in small spaces. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

Two spring-loaded balls give these pins more holding power than quick-release pins with only one retaining ball. The balls pop out when the pin is pushed into a hole, and retract when the pin is pulled out.

For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

The extra height and smaller width of the grip make the button more accessible in tight spaces. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

When there isn't enough room for a T-handle, an L-handle saves space but is still easy to grip. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

These pins adjust to take up play in a system or hold parts in holes of varying thicknesses. Spin the handle up or down, then tighten the locknut to change the length by up to ½”. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Four spring-loaded retaining balls provide extra holding power. Made entirely of stainless steel, these pins stand up to corrosive enviroments. They lock in place until you push the button to release the spring-loaded retaining balls.

A recessed button prevents accidental pin removal. These all-stainless steel pins stand up to corrosive environments. They lock in place until you push the button to release the spring-loaded retaining balls.

Also known as double-acting pins, these pins lock in place until you push the button or pull the ring to release the spring-loaded retaining balls. The smooth ring handle won't catch on parts.

To insert and remove these pins, press the button, then flip the lever to release the spring-loaded retaining balls. Two-step locking prevents accidental removal.

Use a screwdriver to install these receptacles in a threaded hole.

Create a custom headed pin with your choice of material, dimensions, and end type.

Also known as hitch pin clips and R-clips, use these cotter pins in applications requiring quick installation and removal.