Reusable Push-In Rivets
A flexible shank allows these rivets to be removed and reused. The shank collapses when these rivets are pushed through a hole, then springs back completely to hold fast. Use your thumb to push into place from one side of the material. To remove, pop them out with a removal tool.
For technical drawings and 3-D models, click on a part number.
Keyhole shank rivets are more flexible than arrow shank rivets.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Temperature Range, °F | Material | Choose a Color | Pkg. Qty. | Pkg. | |
| 0.093" | 0.25" | 0.125" | 1/8" | 0.25" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 000000 | |
| 0.093" | 0.313" | 0.156" | 5/32" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.125" | 0.313" | 0.125" | 1/8" | 0.25" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.125" | 0.375" | 0.156" | 5/32" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.156" | 0.375" | 0.125" | 1/8" | 0.25" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.156" | 0.375" | 0.156" | 5/32" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.156" | 0.438" | 0.187" | 3/16" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.187" | 0.438" | 0.156" | 5/32" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.187" | 0.5" | 0.187" | 3/16" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.187" | 0.563" | 0.25" | 1/4", E | 0.5" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.25" | 0.5" | 0.187" | 3/16" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.25" | 0.625" | 0.25" | 1/4", E | 0.5" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.312" | 0.688" | 0.25" | 1/4", E | 0.5" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.375" | 0.625" | 0.187" | 3/16" | 0.312" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.375" | 0.75" | 0.25" | 1/4", E | 0.5" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.5" | 0.875" | 0.25" | 1/4", E | 0.5" | 0.062" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 |
Slide these tools under the head of plastic push-in rivets and squeeze the handles to pop the rivet out. They are also known as panel clip pliers.
| Lg. | Wd. | Ht. | Max. Jaw Opening | Each | |
| 9" | 2 1/2" | 4 1/2" | 1 1/2" | 000000000 | 000000 |
Press-Fit Keyhole Supports
Once the end is permanently clinched in place, panels with keyholes easily slide on and off these supports for repairs and upgrades. Supports have good corrosion resistance and are passsivated for enhanced protection. They may be mildly magnetic. Use a lever press to install supports.
For technical drawings and 3-D models, click on a part number.
For Hole Dia. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Connector Lg. | (A) | (B) | For Panel Thick. (C) | For Min. Panel Thick. (D) | PEM® Part Number | Specifications Met | Pkg. Qty. | Pkg. | |
Passivated 300 Series Stainless Steel | ||||||||||
0.212" OD | ||||||||||
| 1/4" | 0.108" | 0.213" | 0.177" | 0.057" to 0.064" | 0.04" | SKC-6060-8 | ASTM A380 | 10 | 000000000 | 00000 |
| 3/8" | 0.108" | 0.213" | 0.177" | 0.057" to 0.064" | 0.04" | SKC-6060-12 | ASTM A380 | 10 | 000000000 | 0000 |
| 1/2" | 0.108" | 0.213" | 0.177" | 0.057" to 0.064" | 0.04" | SKC-6060-16 | ASTM A380 | 10 | 000000000 | 0000 |
| 5/8" | 0.108" | 0.213" | 0.177" | 0.057" to 0.064" | 0.04" | SKC-6060-20 | ASTM A380 | 10 | 000000000 | 00000 |
| 3/4" | 0.108" | 0.213" | 0.177" | 0.057" to 0.064" | 0.04" | SKC-6060-24 | ASTM A380 | 10 | 000000000 | 00000 |
Locking Pins for Pallet Racks
Prevent forklifts from knocking pallet racks apart—these 90° pins lock horizontal beams in place so you can safely load and unload pallets. To install, slide them into keyholes where beams and columns join. While many pins are only compatible with racks from one manufacturer, these will fit into any rack with keyholes sized between 3/8" and 1/2". Pins have a zinc plating to resist corrosion in wet environments.