McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    8 Products

    Machine Key Stock

    Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
    1008-1045 Carbon Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    1008-1045 carbon steel key stock is an economical choice with good strength.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    DIN 6880—Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.
    Tolerance,
    mm
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Specs.
    Met
    Each
    305 mm Long
    16 mm × 28 mmOversized0.000 to 0.0760.000 to 0.076Rockwell B87—92288A488000000
    16 mm × 28 mmUndersized-0.110 to 0.000-0.052 to 0.000Rockwell B87DIN 688092288A53600000
     
    1,000 mm Long
    16 mm × 28 mmUndersized-0.110 to 0.000-0.052 to 0.000Rockwell B87DIN 688092288A583000000
     
    Zinc-Plated 1008-1045 Carbon Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    Zinc-plated 1008-1045 carbon steel key stock is an economical choice with good strength and resists corrosion in wet environments.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Tolerance,
    mm
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    305 mm Long
    16 mm × 28 mmOversized0.000 to 0.0760.000 to 0.076Rockwell B8792288A400000000
    25 mm × 28 mmOversized0.000 to 0.0760.000 to 0.076Rockwell B8792288A62000000
     
    Zinc-Yellow-Chromate-Plated 1045 Carbon Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    Zinc-yellow-chromate-plated 1045 carbon steel key stock is an economical choice with good strength and resists corrosion in wet environments.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    DIN 6880—Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.
    Tolerance,
    mm
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Specs.
    Met
    Each
    305 mm Long
    16 mm × 28 mmUndersized-0.110 to 0.000-0.052 to 0.000Rockwell B87DIN 688092288A749000000
     
    316 Stainless Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    316 stainless steel key stock has the best corrosion resistance of our stainless steel key stock and may be mildly magnetic. 316 stainless steel key stock is more corrosion resistant than steel key stock.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    DIN 6880—Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Tolerance,
    mm
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Specs.
    Met
    Each
    305 mm Long
    16 mm × 28 mmUndersized-0.110 to 0.000-0.052 to 0.000Rockwell B85DIN 688092288A6230000000
     
    1,000 mm Long
    16 mm × 28 mmUndersized-0.110 to 0.000-0.052 to 0.000Rockwell B85DIN 688092288A631000000
     
    back to top