McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    30 Products

    Machine Key Stock

    Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
    1008-1045 Carbon Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    1008-1045 carbon steel key stock is an economical choice with good strength.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    7/8" × 7/8"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098830A410000000
    7/8" × 7/8"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098830A54400000
     
    36" Long
    7/8" × 7/8"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098830A98500000
    7/8" × 7/8"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098830A54500000
     
    72" Long
    7/8" × 7/8"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098830A670000000
     
    Zinc-Plated 1008-1045 Carbon Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    Zinc-plated 1008-1045 carbon steel key stock is an economical choice with good strength and resists corrosion in wet environments.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    3/16" × 7/8"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B5098491A127000000
    1/2" × 7/8"Oversized0.000" to 0.004"0.000" to 0.004"Rockwell B5098491A20100000
    1/2" × 7/8"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098491A48100000
    5/8" × 7/8"Oversized0.000" to 0.004"0.000" to 0.004"Rockwell B5098491A20800000
    5/8" × 7/8"Undersized-0.004" to 0.000"-0.004" to 0.000"Rockwell B5098491A94700000
    11/16" × 7/8"Oversized0.000" to 0.004"0.000" to 0.004"Rockwell B5098491A22200000
    3/4" × 7/8"Oversized0.000" to 0.004"0.000" to 0.004"Rockwell B5098491A22700000
    3/4" × 7/8"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098491A56300000
    7/8" × 7/8"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A24200000
    7/8" × 7/8"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B5098510A24500000
     
    36" Long
    7/8" × 7/8"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A43400000
    7/8" × 7/8"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098491A43500000
     
    1095 Spring Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    1095 spring steel key stock is an economical choice with good strength.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    5/8" × 7/8"Standard-0.001" to 0.002"-0.001" to 0.002"Rockwell B9098535A215000000
    3/4" × 7/8"Standard-0.001" to 0.002"-0.001" to 0.002"Rockwell B9098535A22500000
    7/8" × 7/8"Standard-0.001" to 0.002"-0.001" to 0.002"Rockwell B9098535A23000000
     
    18-8 Stainless Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    18-8 stainless steel key stock offers a balance of strength and corrosion resistance. It may be mildly magnetic. 18-8 stainless steel key stock is more corrosion resistant than steel key stock.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    7/8" × 7/8"Oversized0.000" to 0.005"0.000" to 0.005"Rockwell B8298493A245000000
    7/8" × 7/8"Undersized-0.004" to 0.000"-0.004" to 0.000"Rockwell B8292530A24500000
     
    316/316L Stainless Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    316/316L stainless steel key stock has the best corrosion resistance of our stainless steel key stock and may be mildly magnetic. 316/316L stainless steel key stock is more corrosion resistant than steel key stock.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    7/8" × 7/8"Undersized-0.004" to 0.000"-0.004" to 0.000"Rockwell B8698530A2420000000
     
    360 Brass
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    360 brass key stock is corrosion resistant and nonmagnetic. 360 brass is softer than other metals, so it's often used for shear keys.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    7/8" × 7/8"Standard-0.0045" to 0.0045"-0.0045" to 0.0045"Rockwell B3598500A450000000
     

    Tapered Gib Keys

    Image of Attribute. Front orientation. Contains Annotated. Tapered Gib Keys.
    These keys have a tapered body that wedges in to the keyway for a more secure fit than standard machine keys. The gib head makes these keys easy to remove when parts need to be taken apart frequently, such as for maintenance or prototyping. Keys are tapered along their length. Use them to connect gears and other components with tapered keyways to shafts. Keys are made of steel.
    Inch—The height of inch keys decreases by 1/8" for every 12" of length. They conform to ASME B17.1 Class 1 standards for dimensions and tolerances.
    Tolerance
    Head
    Lg.
    Ht.
    Wd.
    Ht.
    Lg.
    End
    Ht.
    Rate of
    Taper
    Specs. Met
    System of
    Measurement
    Each
    1018-1045 Carbon Steel
     
    7/8" × 7/8"
    4"-0.004" to 0.000"-0.004" to 0.000"1 1/4"1"0.842"1:96ASME B17.1 Class 1Inch98471A404000000
    5 1/2"-0.004" to 0.000"-0.004" to 0.000"1 1/4"1"0.827"1:96ASME B17.1 Class 1Inch98471A40700000
    6"-0.004" to 0.000"-0.004" to 0.000"1 1/4"1"0.822"1:96ASME B17.1 Class 1Inch98471A40800000
     

    Fixture Keys

    Image of ProductInUse. Front orientation. Contains Annotated. Fixture Keys. Fixture Keys.
    Image of Product. Front orientation. Contains Annotated. Fixture Keys. Fixture Keys, Rectangle.

    Rectangle

    Sized to fit with precision in machine table T-slots, use these keys to locate fixtures and vises on your machine table. They mount to the underside of your fixture or vise with a socket head cap screw.
    For Machine
    Table T-Slot Wd.
    Lg.
    Wd.
    Ht.
    Wd. Tolerance
    For Mounting
    Screw Size
    Mounting Fasteners
    Included
    Each
    Rectangle
     
    Steel
    7/8"1 1/4"7/8"3/4"-0.0005" to 0"5/16"
    		No8961A14000000
     

    Plastic L-Key Organizers

    Image of Product. Front orientation. Hex Key Organizers. Plastic L-Key Organizers, Style B.

    Style B

    These plastic organizers store keys in slots marked with the size.
    Style
    For No.
    of Keys
    For Drive
    Style
    For Key Sizes
    Lg.
    Wd.
    Ht.
    Each
    B12Hex
    		0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16"1 1/2"7/8"2 3/4"53045A4200000
    B13Hex
    		0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"2"7/8"3"53045A190000
    back to top