ASTM E595 Label Printer Tape

Filter by

For Printer Model

Manufacturer Model Number

Printer Type

Manufacturer

Message Type

Width

Color

Mount Type

Appearance

Collected Volatile Condensable Material (CVCM)

0.06%

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

For Printer Series

Length

Maximum Temperature

Message

Minimum Temperature

Number of Labels per Roll

Number of Labels per Row

Performance

REACH

RoHS

Specifications Met

Thickness

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Total Mass Loss (TML)

13 Products

Brady Label Printer Tape for Wire and Cable

Make labels for wire and cable with your Brady M-series printer.

Pre-Cut Heat-Shrink Tubing

Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

For M7 Series Printers—Tape for M6 and M7 printers requires a compatible printer ink ribbon.

Low Outgassing—Low outgassing tape produces almost no volatile emissions, even in high-vacuum settings. It meets ASTM E595, which is an outgassing standard developed by NASA for products used in highly controlled environments.

Tape Adapters—To use M6 tape in an M7 printer, you'll need a tape adapter.

	Tape														Printer Ink Ribbons for M6 Series Printers		Printer Ink Ribbons for M7 Series Printers		Tape Adapters
				For Wire
	Wd.	Lg.	Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	No. of Labels per Roll	Mount Type	Temp. Range, ° F	Specs. Met		Each		Each		Each		Each
For Brady M6 and M7 Series Printers







				PVDF—Low Outgassing

				1"	1/8"	White	26 to 18	0.03" to 0.08"	M6-094-1-345-WT	0.016"	4	100	Wraparound	-65 to 435	ASTM E595	5317N69	0000000	9117N122	000000	2184N13	000000	2168N128	00000


				1"	1/4"	White	20 to 16	0.06" to 0.11"	M6-125-1-345-WT	0.016"	6	100	Wraparound	-65 to 435	ASTM E595	5317N71	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	3/8"	White	16 to 10	0.09" to 0.15"	M6-187-1-345-WT	0.016"	6	100	Wraparound	-65 to 435	ASTM E595	5317N72	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	1/2"	White	12 to 8	0.12" to 0.21"	M6-250-1-345-WT	0.016"	7	100	Wraparound	-65 to 435	ASTM E595	5317N73	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	5/8"	White	8 to 4	0.19" to 0.32"	M6-375-1-345-WT	0.016"	8	100	Wraparound	-65 to 435	ASTM E595	5317N74	000000	9117N122	00000	2184N13	00000	2168N128	0000
				1"	7/8"	White	6 to 1	0.25" to 0.45"	M6-500-1-345-WT	0.016"	10	100	Wraparound	-65 to 435	ASTM E595	5317N75	000000	9117N122	00000	2184N13	00000	2168N128	0000

Brady M6/M7 Label Printer Tape

Create labels with your Brady M6 or M7 printer. Pair this tape with a printer ink ribbon in the same series as your printer.

Pre-Cut Tape for M7 Series Printers

Polyester Plastic—Polyester tape holds up the best to dirt, oil, and cleaning.

Low Outgassing—Low-outgassing adhesive produces almost no volatile emissions, even in high-vacuum settings. It meets ASTM E595, which is a standard developed by NASA for products used in highly controlled environments. Tape with this adhesive must be paired with M7-R6000 ink ribbons to maintain the standard.

Aggressive Adhesion—Aggressive adhesive sticks to nearly any surface, including concrete and other porous materials. It holds up in oily, dirty, or damp areas, and it stays put even with heavy use or regular cleaning. However, it’s more difficult to remove from surfaces than standard adhesives.

	Tape											Printer Ink Ribbons for M7 Series Printers
	Wd.	Lg.	Color	Mfr. Model No.	Thk.	Roll Lg., ft.	No. of Labels per Roll	Temp. Range, ° F	Specs. Met		Each		Each
Polyester Plastic with Aggressive Adhesion, Low-Outgassing Adhesive Back



		15/16"	1/4"	White	M7-13-423	0.003"	23	750	-90 to 230	ASTM E595	2168N129	000000	2184N13	000000


		1"	3/8"	White	M7-16-423	0.003"	21	500	-90 to 230	ASTM E595	2168N131	00000	2184N13	00000
		1"	1/2"	White	M7-17-423	0.003"	26	500	-90 to 230	ASTM E595	2168N132	00000	2184N13	00000
		1 1/2"	1"	White	M7-31-423	0.003"	23	250	-90 to 230	ASTM E595	2168N133	00000	2184N13	00000