Ladder Cages
Feel secure on tall ladders. These cages surround the ladder to help reduce the risk of falls. Made of powder-coated steel, they resist rust, so you can use them outdoors. Each section is fully welded and mounts to the side rails of stationary ladders. They don’t mount to walls or other cages. For a complete assembly, you’ll need at least one middle/top section and one bottom section.
Bottom sections are flared to give you room to enter or exit your cage. Middle/top sections make your cage longer. They can also act as a top section when your ladder system includes a hatch. Walk-through sections are required when you can step through the top of your ladder onto a landing. They should extend 42" above the top rung.
Yellow cages stand out in busy areas.
Note: Ladder cages meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Cage | Flared Cage | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Ht., ft. | Wd. | Dp. | Wd. | Dp. | For Ladder Wd. | Max. Ladder Rail Dp. | Wt., lbs. | Mounting Hardware Included | Specifications Met | Each | |
Gray | |||||||||||
Powder-Coated Steel | |||||||||||
Bottom Section | |||||||||||
| 2 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 47 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 0000000 |
| 3 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 54 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 71 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Middle/Top Section | |||||||||||
| 2 | 30" | 30" | __ | __ | 16"-20" | 2" | 55 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 3 | 30" | 30" | __ | __ | 16"-20" | 2" | 61 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 30" | 30" | __ | __ | 16"-20" | 2" | 68 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 7 | 30" | 30" | __ | __ | 16"-20" | 2" | 110 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Walk-Through Section | |||||||||||
| 5 | 30" | 30" | __ | __ | 16"-20" | 2" | 85 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Yellow | |||||||||||
Powder-Coated Steel | |||||||||||
Bottom Section | |||||||||||
| 2 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 47 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 3 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 54 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 71 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Middle/Top Section | |||||||||||
| 2 | 30" | 30" | __ | __ | 16"-20" | 2" | 55 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 3 | 30" | 30" | __ | __ | 16"-20" | 2" | 61 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 30" | 30" | __ | __ | 16"-20" | 2" | 68 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 7 | 30" | 30" | __ | __ | 16"-20" | 2" | 110 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Walk-Through Section | |||||||||||
| 5 | 30" | 30" | __ | __ | 16"-20" | 2" | 85 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Wall-Mount Ladders with Cage
Ladder and cage come unassembled for mounting flexibility and lower freight costs. The cage surrounds the ladder to help reduce the risk of falls and make you feel secure—especially when climbing tall ladders. Made of galvanized steel, these ladders hold up outdoors. Knurled treads have good slip resistance. The cage starts between 7 and 8 ft. from the ground and extends beyond the top rung by 42" with a walk-through exit.
A security cover (sold separately) prevents unauthorized access. It blocks five rungs—hook it over the highest rung you want to cover, then secure it at the bottom with the hasp and a padlock (not included).
Note: Ladders meet OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Ladder | Cage | Flared Cage | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | O'all Ht. with Cage | Wd. | Dp. | Wd. | Dp. | Wt., lbs. | No. of Steps | Step Tread | Mounting Hardware Included | No. of | Lg. | Wd. | Assembled or Unassembled | Specifications Met | Each | |
Galvanized Steel | ||||||||||||||||||
300-lb. Capacity | ||||||||||||||||||
| 10'6" | 11 | 19 1/2" | 14'1" | 27" | 28 1/2" | 35" | 32 1/2" | 180 | 11 | Knurled | Yes | 12 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 000000000 |
| 11'6" | 12 | 19 1/2" | 15'1" | 27" | 28 1/2" | 35" | 32 1/2" | 185 | 12 | Knurled | Yes | 12 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 12'6" | 13 | 19 1/2" | 16'1" | 27" | 28 1/2" | 35" | 32 1/2" | 195 | 13 | Knurled | Yes | 12 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 13'6" | 14 | 19 1/2" | 17'1" | 27" | 28 1/2" | 35" | 32 1/2" | 210 | 14 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 14'6" | 15 | 19 1/2" | 18'1" | 27" | 28 1/2" | 35" | 32 1/2" | 220 | 15 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 15'6" | 16 | 19 1/2" | 19'1" | 27" | 28 1/2" | 35" | 32 1/2" | 230 | 16 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 16'6" | 17 | 19 1/2" | 20'1" | 27" | 28 1/2" | 35" | 32 1/2" | 235 | 17 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 17'6" | 18 | 19 1/2" | 21'1" | 27" | 28 1/2" | 35" | 32 1/2" | 250 | 18 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 18'6" | 19 | 19 1/2" | 22'1" | 27" | 28 1/2" | 35" | 32 1/2" | 265 | 19 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 20'6" | 21 | 19 1/2" | 24'1" | 27" | 28 1/2" | 35" | 32 1/2" | 280 | 21 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 22'6" | 23 | 19 1/2" | 26'1" | 27" | 28 1/2" | 35" | 32 1/2" | 300 | 23 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 24'6" | 25 | 19 1/2" | 28'1" | 27" | 28 1/2" | 35" | 32 1/2" | 315 | 25 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 26'6" | 27 | 19 1/2" | 30'1" | 27" | 28 1/2" | 35" | 32 1/2" | 340 | 27 | Knurled | Yes | 24 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 28'6" | 29 | 19 1/2" | 32'1" | 27" | 28 1/2" | 35" | 32 1/2" | 360 | 29 | Knurled | Yes | 24 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 29'6" | 30 | 19 1/2" | 33'1" | 27" | 28 1/2" | 35" | 32 1/2" | 380 | 30 | Knurled | Yes | 24 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
Wall-Mount Ladders with Welded-On Cage
A cage is welded to these ladders for quick installation. Ladders come in sections no longer than 7 feet for easy handling—bolt sections together end-to-end (fasteners included). Cages start 7 feet above the bottom of the ladder and extend beyond the top rung by 42".
Optional security cover prevents unauthorized access. It can be welded or bolted on (holes must be drilled) to open from the right side.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Ladder | Cage | Flared Cage | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht. | Wd. | O'all Ht. with Cage | Wd. | Dp. | Wd. | Dp. | Wt., lbs. | No. of Steps | Step Tread | Projection | Mounting Hardware Included | No. of | Dia. | No. of Mounting Brackets | Specifications Met | Each | |
Gray Powder-Coated Steel | ||||||||||||||||||
300-lb. Capacity | ||||||||||||||||||
| 12'1" | 12'1" | 20" | 15'7 1/2" | 30" | 27" | 36 1/2" | 30" | 260 | 13 | Ribbed | 7" | No | 10 | 9/16" | 10 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 000000000 |
| 16'1" | 16'1" | 20" | 19'7 1/2" | 30" | 27" | 36 1/2" | 30" | 350 | 17 | Ribbed | 7" | No | 14 | 9/16" | 14 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| 20'1" | 20'1" | 20" | 23'7 1/2" | 30" | 27" | 36 1/2" | 30" | 430 | 21 | Ribbed | 7" | No | 14 | 9/16" | 14 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| 24'1" | 24'1" | 20" | 27'7 1/2" | 30" | 27" | 36 1/2" | 30" | 520 | 25 | Ribbed | 7" | No | 18 | 9/16" | 18 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| 27'1" | 27'1" | 20" | 30'7 1/2" | 30" | 27" | 36 1/2" | 30" | 575 | 28 | Ribbed | 7" | No | 14 | 9/16" | 14 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| Ht., ft. | Wd. | Wt., lbs. | Features | Max. Padlock Shackle Dia. | Mounting Hardware Included | Each | |
Gray Powder-Coated Steel | |||||||
|---|---|---|---|---|---|---|---|
| 6 | 20 7/8" | 41 | Padlockable Hasp | 13/32" | Yes | 00000000 | 0000000 |
Enclosed Platform Step Ladders
Unlike standard platform step ladders, these ladders have guardrails on all sides of the platform, allowing you to safely work with both hands while facing any direction. They are faster to set up and quicker to transport than other enclosed platforms, such as scaffolds and lifts. The gates only open in one direction, making it easy to step onto the platform while ensuring they stay closed during work. All ladders have nonconductive fiberglass rails and nonskid feet. They also have outriggers to create a wide base for added stability. Fold these ladders for compact storage and easy transport; tilt to roll them on their wheels.
ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: The number of steps listed includes the platform.
Adjustable ladders slide up and down in 12" increments by unlocking the lever on each rail. Each rail also has a telescoping foot that adjusts independently for use on uneven surfaces.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.
O'all | Platform | Step | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wd. (E) | Dp. (F) | Material | Tread | Cap., lbs. | Duty Rating | Wt., lbs. | No. of Steps | Material | Tread | Wheel Configuration | Specifications Met | Each | |
Fiberglass | |||||||||||||||||
Fixed Height—With Outriggers | |||||||||||||||||
| 6'4" | 35" | 47" | 3'8" | 21" | 18" | Aluminum | Ribbed | 375 | Type 1AA | 54 | 4 | Aluminum | Ribbed | Two Swivel and Four Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 000000000 |
| 8'3" | 38" | 61" | 5'7" | 21" | 18" | Aluminum | Ribbed | 375 | Type 1AA | 65 | 6 | Aluminum | Ribbed | Two Swivel and Four Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 00000000 |
| 10'2" | 41" | 75" | 7'5" | 21" | 18" | Aluminum | Ribbed | 375 | Type 1AA | 69 | 8 | Aluminum | Ribbed | Two Swivel and Four Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 00000000 |
| 12' | 44" | 89" | 9'4" | 21" | 18" | Aluminum | Ribbed | 300 | Type 1A | 81 | 10 | Aluminum | Ribbed | Two Swivel and Four Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 00000000 |
Adjustable Height—With Outriggers | |||||||||||||||||
| 11'8"-17'8" | 46"-83" | 79"-121" | 13'5" | 22" | 18" | Aluminum | Ribbed | 375 | Type 1AA | 120 | 14 | Aluminum | Ribbed | Four Swivel and Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 00000000 |
| 8'8"-12'8" | 46"-83" | 57"-91" | 8'9" | 22" | 18" | Aluminum | Ribbed | 375 | Type 1AA | 95 | 8 | Aluminum | Ribbed | Four Swivel and Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 00000000 |
| 6'8"-8'8" | 46" | 44"-58" | 4'11" | 22" | 18" | Aluminum | Ribbed | 375 | Type 1AA | 80 | 4 | Aluminum | Ribbed | Four Swivel and Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 00000000 |