Vertical Fall-Arrest Anchor Spans for Ladders

Protect against falls while climbing ladders. These anchor spans have adjustable clamp brackets and secure permanently with an eyebolt on each end. You supply a harness and a carabiner as well as a wire rope grab (sold separately). In the event of a fall, the rope grab stops you within inches.
Anchor Spans | Wire Rope Grabs | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | For Max. Rung Dia. | Capacity per Person, lbs. | Max. No. of Simultaneous Users | Material | Construction | Connection Type | Includes | Specifications Met | Each | Each | ||
50 | 1 1/4" | 310 | 4 | Steel | Wire Rope | Eyebolt × Eyebolt | Mounting Hardware | ANSI A14.3 | 0000000 | 0000000 | 0000000 | 0000000 |
100 | 1 1/4" | 310 | 4 | Steel | Wire Rope | Eyebolt × Eyebolt | Mounting Hardware | ANSI A14.3 | 0000000 | 000000 | 0000000 | 000000 |
Vertical Fall-Arrest Anchor Spans

Also known as vertical lifelines, these anchor spans protect you from falls when climbing vertical structures such as ladders and scaffolding. Durable enough for outdoor use, the polyester rope withstands abrasion, rot, and mildew. It can also handle temperatures up to 300° F.
To use these anchor spans, you’ll need a harness and a lanyard with a rope grab (sold separately). Attach the snap hook at one end of the rope to an overhead anchor point. If you fall, the rope grab stops you within inches. These anchor spans help you meet OSHA and ANSI safety standards.
Anchor Span Ropes | Lanyards with Rope Grab | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Max. No. of Simultaneous Users | Material | Construction | Connection Type | Capacity, lbs. | Breaking Strength, lbs. | Specifications Met | Each | Each | ||
25 | 1 | Polyester | Rope | Snap Hook | 310 | 5,000 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI A10.32, ANSI Z359.1 | 00000000 | 000000 | 0000000 | 0000000 |
50 | 1 | Polyester | Rope | Snap Hook | 310 | 5,000 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI A10.32, ANSI Z359.1 | 000000 | 000000 | 0000000 | 000000 |
100 | 1 | Polyester | Rope | Snap Hook | 310 | 5,000 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI A10.32, ANSI Z359.1 | 000000 | 000000 | 0000000 | 000000 |
Horizontal Fall-Arrest Anchor Spans




Also known as horizontal lifelines, these anchor spans provide fall protection on roofs and other areas where overhead anchors aren’t available. Attach to an anchor point on both sides. Once clipped in, you can move freely along the line while remaining tethered. When used together with a lanyard and harness, these anchor spans help you meet OSHA safety standards.
Wire rope anchor spans are made of galvanized steel, so they resist corrosion and abrasion better than other anchor spans. This makes them tough enough to use outdoors for lines that stay up for multiple jobs.
Lg., ft. | Max. No. of Simultaneous Users | Material | Construction | Connection Type | Capacity per Person, lbs. | Breaking Strength, lbs. | Specifications Met | Each | |
60 | 2 | Polyester | Webbing | Carabiner × Carabiner | 310 | 3,600 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | 000000 | 0000000 |
60 | 2 | Galvanized Steel | Wire Rope | Snap Hook × Snap Hook | 400 | 5,000 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | 00000000 | 000000 |
100 | 4 | Polyester | Rope | Carabiner × Carabiner | 310 | 6,000 | ANSI Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | 00000000 | 00000000 |
Hard-Hat Lanyards

Attach to your hard hat to prevent accidental drops. These lanyards meet ANSI/ISEA 121, which certifies that their design keeps your hard hat from falling and harming people and equipment below.
Lg. | Material | Construction | Connection Type | Specifications Met | Each | |
23 1/4" | Polyester/Rubber | Webbing | Elastic Strap with Cinching Buckle × Cinching Buckle | ANSI/ISEA 121 | 0000000 | 00000 |
Tool Lanyards




Keep your equipment close and prevent accidental drops.
For No. of Tools | Connection Type | Capacity, lbs. | Lg. | Material | Construction | For Min. Tool Opening | Carabiner Material | Each | |
1 | Carabiner × Elastic Loop | 10 | 35" | Nylon | Webbing | 3/8" | Aluminum | 0000000 | 000000 |
1 | Carabiner × Detachable Elastic Loop | 5 | 38" | Nylon | Webbing | 3/8" | Aluminum | 0000000 | 00000 |
1 | Carabiner × Carabiner | 10 | 35" | Nylon | Webbing | 1/4" | Aluminum | 0000000 | 00000 |
2 | Carabiner × Carabiner × Carabiner | 15 | 35" | Nylon | Webbing | 1/4" | Stainless Steel | 0000000 | 00000 |
Replacement Detachable Elastic Loop | 0000000 | Each | 00000 |
Wrist Tool Lanyards





Tethered to your wrist, your tools will always be within reach. When working at height, these lanyards prevent accidental drops that could harm people and damage equipment below. They meet ANSI/ISEA 121 for design and performance to ensure safety. To properly tether your tool, you’ll need an attachment point on your tool.
Lanyards with a detachable elastic loop let you quickly disconnect tools from the wristband—no need to undo the loop. Add more detachable loops (sold separately) so you can have other tools ready to snap in.
Lanyards | Replacement Detachable Elastic Loops | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Connection Type | For No. of Tools | Capacity, lbs. | Lg. | Retracted Lg. | Extended Lg. | Material | Construction | For Min. Tool Opening | For Max. Wrist Circumference | Carabiner Material | Features | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
Wristband × Elastic Loop | 1 | 5 | 10" | __ | __ | Nylon | Rope | 7/64" | 10 1/4" | __ | Cord Lock | ANSI/ISEA 121 | 0000000 | 00000 | __ | 000000 | 00 |
Wristband × Detachable Elastic Loop | 1 | 5 | 10" | __ | __ | Nylon | Rope | 3/16" | 10 1/4" | __ | Cord Lock | ANSI/ISEA 121 | 0000000 | 00000 | 3 | 0000000 | 000000 |
Wristband × Retractable Detachable Elastic Loop | 1 | 1 | __ | 8 1/2" | 46" | Nylon | Rope | 9/32" | 10 1/4" | __ | Cord Lock | ANSI/ISEA 121 | 0000000 | 00000 | 3 | 0000000 | 00000 |
Wristband × Carabiner | 1 | 5 | 7" | __ | __ | Nylon | Webbing | 1/2" | 10" | Aluminum | __ | ANSI/ISEA 121 | 0000000 | 00000 | __ | 000000 | 00 |
Tool Tethering Kits

Everything you need to keep tools close to you while you work at height. These kits prevent tools from accidentally falling and hurting someone or damaging equipment below. The components in these kits meet ANSI/ISEA 121 design and performance safety standards. To tether your tools properly, combine a tool attachment point with a lanyard and secure it to an anchor point.
No. of Pieces | Includes | Specifications Met | Each | |
24 | Six Webbing Tool Attachment Points Six Wire Tool Attachment Points Three Elastic Tool Attachment Points Two Coiled Tool Lanyards—Carabiner × Loop Straight Tool Lanyard—Carabiner × Loop Straight Tool Lanyard—Carabiner × Carabiner Two Rolls of Tool Tape Tape Measure Holder Power Tool Holder Glove Clip | ANSI/ISEA 121 | 0000000 | 0000000 |
Tool Tethering Anchor Points



Extra-Wide
D-Ring
Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. To ensure safety, they meet ANSI/ISEA 121 for design and performance. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.
Slide-on anchor points attach to your harness or tool belt. They’re a good choice for anchoring hand tools.
Wraparound anchor points attach to rated structures such as railings and scaffolding. They support heavy tools without weighing you down. Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards. A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.
Capacity, lbs. | For No. of Tools | Connection Type | Material | Cover Material | Construction | For Max. Dia. | Specifications Met | Each | |
Slide On | |||||||||
---|---|---|---|---|---|---|---|---|---|
15 | 1 | D-Ring | Nylon | __ | Webbing | 2 1/2" | ANSI/ISEA 121 | 0000000 | 00000 |
Wraparound | |||||||||
25 | 1 | D-Ring | Polyester | __ | Webbing | 6" | ANSI/ISEA 121 | 0000000 | 0000 |
Wraparound with Extra-Wide D-Ring | |||||||||
50 | 5 | D-Ring | Nylon | Nylon | Webbing | 6" | ANSI/ISEA 121 | 0000000 | 00000 |