Antislip Step Covers
Weld these covers to the rungs of your wall and tank ladders for excellent slip resistance. Covers fit square and round rungs. Can be cut with a hand grinder or miter saw using a masonry blade.
Ladder-Style Steps
Good for use as ladder rungs, cut these steps to size with a metal-cutting saw and weld them in place. For a clean weld, match the step material to the surface you are welding to. These steps must be welded at each end with welds capable of supporting the rated capacity. For those 5 ft. and longer, the maximum cut length is 24". Shorter lengths support higher capacities.
Galvanized steel steps require preparation before welding—grind off the coating from the part of the step you intend to weld. After welding, apply a cold galvanizing spray to the welds to protect against rust.
Serrated steps give you maximum slip resistance and allow liquids and debris to pass through. Perforated steps are less slip-resistant than serrated steps but offer a more comfortable hand grip.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | |||||
|---|---|---|---|---|---|
| Wd. (A) | Dp. (B) | Ht. (C) | Capacity | Each | |
Steel | |||||
With Serrated Tread | |||||
| 17" | 1 1/8" | 1 1/4" | 540 lbs. | 000000 | 000000 |
| 17" | 1 7/8" | 1 1/4" | 540 lbs. | 000000 | 00000 |
| 7 ft. | 1 1/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 0000000 | 000000 |
| 7 ft. | 1 7/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
| 20 ft. | 1 1/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
| 20 ft. | 1 7/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 330 lbs. for 18"-24" Cut Lengths, 450 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 1 5/8" | 1 1/8" | 250 lbs. for 18"-24" Cut Lengths, 330 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 570 lbs. for 18"-24" Cut Lengths, 760 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
Galvanized Steel | |||||
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 330 lbs. for 18"-24" Cut Lengths, 450 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 1 5/8" | 1 1/8" | 250 lbs. for 18"-24" Cut Lengths, 330 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 570 lbs. for 18"-24" Cut Lengths, 760 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
Aluminum  | |||||
With Serrated Tread | |||||
| 17" | 2" | 1 1/2" | 540 lbs. | 0000000 | 00000 |
| 7 ft. | 2" | 1 1/2" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 0000000 | 000000 |
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 310 lbs. for 18"-24" Cut Lengths, 410 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 1 5/8" | 1 1/8" | 220 lbs. for 18"-24" Cut Lengths, 290 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 540 lbs. for 18"-24" Cut Lengths, 720 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
304 Stainless Steel | |||||
With Serrated Tread | |||||
| 17" | 1 1/8" | 1 1/4" | 540 lbs. | 0000000 | 00000 |
| 7 ft. | 1 1/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 230 lbs. for 18"-24" Cut Lengths, 300 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 380 lbs. for 18"-24" Cut Lengths, 510 lbs. Up to 18" Cut Lengths | 00000000 | 000000 |
Step Handles
Add a hand- or foothold for easier access to your vehicle or equipment. These handles have a textured surface that’s easy to grip and keeps you from slipping.
Weld-on step handles can be installed with the side guards facing up or down. Mount them up to keep your toe from slipping; mount them down to maximize the surface area on top of the handle. For a clean weld, choose a handle that’s the same material as your mounting surface.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Step | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Ht. (A) | Wd. (B) | Dp. (C) | Wd. | Dp. | Tread | Projection | Wt., lbs. | Color | Mounting Hardware Included | No. of | Dia. | Ctr.-to-Ctr. Ht. | Ctr.-to-Ctr. Wd. | Assembled or Unassembled | Each | |
Bolt On | |||||||||||||||||
| Plastic | 1 5/8" | 6 3/8" | 2 1/2" | 3 1/4" | 1 1/8" | Diamond Plate | 2 1/2" | 0.22 | Black | No | 4 | 1/4" | 3/4" | 5 1/2" | Assembled | 0000000 | 00000 |
Weld On | |||||||||||||||||
| Aluminum | 1 5/8" | 7 3/4" | 4 1/8" | 7" | 1 5/8" | Diamond Plate | 4 1/8" | 1.12 | __ | __ | __ | __ | __ | __ | Assembled | 0000000 | 00000 |
| Steel | 1 3/4" | 7 3/4" | 4 1/8" | 6 3/4" | 1 5/8" | Diamond Plate | 4 1/8" | 3.2 | __ | __ | __ | __ | __ | __ | Assembled | 0000000 | 00000 |
Slip-Resistant Handrail Tape
Wrap around ladder handrails for a solid grip.
| Wd. | Lg., ft. | Material | Temp. Range, °F | Color | Each | |
| 2" | 8 | Plastic | -20° to 160° | Black | 0000000 | 000000 |
Abrasive Antislip Tape with Conformable Backing
Stick this ultra-flexible tape to ladder rungs, diamond tread plates, and other uneven and irregular surfaces with sharp corners. After installation, wait one hour before walking on this tape.
| Wd. | Lg., ft. | Thick. | Adhesive Type | Time Required Before Use, hrs. | Temp. Range, °F | For Use Outdoors | Each | |
Roll | ||||||||
|---|---|---|---|---|---|---|---|---|
Aluminum | ||||||||
| 2" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 000000 |
| 4" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 00000 |
| 6" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 00000 |
| 12" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 000000 |
Rectangle | ||||||||
Aluminum | ||||||||
| 6" | 2 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 00000 |