Ladders are shipped unassembled to save on freight costs. Use the step lock to keep casters stationary.

You are responsible for adhering to local, state, and federal safety codes, including OSHA.

Note: The number of steps listed includes the platform.

Perforated and coated steps provide good slip resistance while being easy on your shoes. Perforated steps also allow liquids to drain and debris to fall through.

Picking and putting away material just got easier. Ladders have three shelves with raised edges that each hold 70 lbs. Platform and steps are serrated for maximum slip resistance. Use the step lock to keep casters stationary.

Note: The number of steps listed includes the platform.

Note: All ladders meet OSHA or Cal/OSHA dimensional and construction standards. As ladders get taller, the base gets wider. The widest part of the base is at the back of the ladder. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Fold these ladders for easy transport and storage. They have ribbed steps to keep you from slipping. Slots in the top are made for holding tools.

Fiberglass ladders are nonconductive, so you can use them for electrical work. Aluminum ladders are lighter than fiberglass ladders, so they’re easier to move between work areas.

Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.

Ladders with a shelf can hold larger objects, such as paint cans.

Note: Ladders meet ANSI, OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

No need to balance on narrow rungs—these step ladders have a large platform to keep you comfortable while you work. They also have a guardrail, so they’re safer than standard step ladders. The platform and steps have a ribbed surface to keep you from slipping. Fold these ladders for storage. The number of steps listed includes the platform.

Fiberglass ladders are nonconductive, so you can use them for electrical work. Aluminum ladders weigh less than fiberglass ladders, so they’re easier to move between work areas.

Type 1A ladders are tested to hold up to 300 lbs. Enclose the platform with a safety gate for extra security. With rails on all sides, you can work with both hands and reach in any direction. Swing the front of the gate open to step onto the platform, then latch it behind you. When it’s not in use, the gate folds against the ladder. To install, drill holes in the ladder rails and attach the gate with the included hardware.

Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Unlike standard platform step ladders, these ladders have guardrails on all sides of the platform, allowing you to safely work with both hands while facing any direction. They are faster to set up and quicker to transport than other enclosed platforms, such as scaffolds and lifts. The gates only open in one direction, making it easy to step onto the platform while ensuring they stay closed during work. All ladders have nonconductive fiberglass rails and nonskid feet. They also have outriggers to create a wide base for added stability. Fold these ladders for compact storage and easy transport; tilt to roll them on their wheels.

ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1A ladders are tested to hold up to 300 lbs.

Note: The number of steps listed includes the platform.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

With steps on both sides, you can climb these ladders from either side or have one person on each set of steps. The capacity listed is for each side of a ladder. Made of fiberglass, they are nonconductive for use in electrical work. They also fold up for compact storage. These ladders meet ANSI A14.5, which certifies dimensional and performance requirements for fiberglass ladders.

Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

The large platform is more comfortable than a step for prolonged standing. With steps on both sides, you can climb from either side or have one person on each side. Type 1A ladders are tested to support up to 300 lbs on each side. Fold for storage.

Note: The number of steps listed includes the platform.

Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders.

Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

With spring-loaded casters, these ladders are easy to move between work areas. When you're on the ladder, the casters retract to keep the ladder stationary. When you step off, the casters roll again. The large platform is more comfortable than a step for prolonged standing. With steps on both sides, you can climb from either side or have one person on each side. Type 1A ladders are tested to support up to 300 lbs on each side. Fold for storage.

Note: The number of steps listed includes the platform.

Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders.

Aluminum ladders are lighter than fiberglass, making them easier to move. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

More versatile than standard step ladders, these ladders can be folded and used as straight ladders. Lean them against walls or use the notched top cap to lean them against poles or studs for safe climbing. The top cap has slots to hold your tools. These ladders have nonconductive fiberglass rails, and the steps are ribbed for good slip resistance.

They’re Type 1AA, which means they’re tested for holding up to 375 lbs.

Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Use these ladders to climb in and out of tight, narrow places. They are also known as manhole ladders.

Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1AA ladders are tested to hold up to 375 lbs.

Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders. Type 1A ladders are tested to hold up to 300 lbs.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed.