Sectional Wall-Mount Ladders
Ladders can be connected to create the height you need. They have textured steps for slip resistance.
Ladders with built-in connectors have built-in splices, so they can be connected to each other. Note: The first rung of the ladder cannot be more than 12" from the floor.
300-lb. capacity ladders use the connecting kit (sold separately) to connect ladders with no drilling required. Mount to the wall with the mounting bracket kit (sold separately). When ladder heights are greater than 20 feet from the floor to the top rung, a ladder cage can help prevent falls.
Connecting kits (sold separately) include splice plates and fasteners. Order one connecting kit for each additional ladder section.
Mounting bracket kits (sold separately) offset the ladder 7" for toe clearance. Kits include fasteners to mount brackets to the ladder; fasteners to mount brackets to a surface are not included. Two kits are recommended for 4-, 5-, and 8-foot ladders; three kits are recommended for the 10-foot ladder. If connecting multiple ladders, one mounting bracket kit is required for each additional ladder section.
Mounting bracket kits without mounting holes must be drilled to the desired bolt hole size to mount to your surface, so you can adapt it to your needs. For instance, use U-bolts (not included) to connect ladder to pipes.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
with Built-In
Connectors
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | Wt., lbs. | No. of Steps | Step Tread | Projection | Mounting Hardware Included | No. of | Lg. | Wd. | No. of Mounting Brackets | Features | Specifications Met | Each | |
Galvanized Steel | |||||||||||||||
250-lb. Capacity | |||||||||||||||
| 3'6" | 4 | 20" | 11 | 4 | Perforated | 7" | No | 4 | 3/4" | 13/32" | 4 | Built-In Connectors | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 0000000 |
300-lb. Capacity | |||||||||||||||
| 3'6" | 4 | 20" | 17 | 4 | Knurled | 7" | No | __ | __ | __ | __ | __ | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 000000 |
Ladder Cages
Feel secure on tall ladders. These cages surround the ladder to help reduce the risk of falls. Made of powder-coated steel, they resist rust, so you can use them outdoors. Each section is fully welded and mounts to the side rails of stationary ladders. They don’t mount to walls or other cages. For a complete assembly, you’ll need at least one middle/top section and one bottom section.
Bottom sections are flared to give you room to enter or exit your cage. Middle/top sections make your cage longer. They can also act as a top section when your ladder system includes a hatch. Yellow cages stand out in busy areas.
Note: Ladder cages meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Cage | Flared Cage | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Ht., ft. | Wd. | Dp. | Wd. | Dp. | For Ladder Wd. | Max. Ladder Rail Dp. | Wt., lbs. | Mounting Hardware Included | Specifications Met | Each | |
Gray | |||||||||||
Powder-Coated Steel | |||||||||||
Bottom Section | |||||||||||
| 4 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 71 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 0000000 |
Middle/Top Section | |||||||||||
| 4 | 30" | 30" | __ | __ | 16"-20" | 2" | 68 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Yellow | |||||||||||
Powder-Coated Steel | |||||||||||
Bottom Section | |||||||||||
| 4 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 71 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Middle/Top Section | |||||||||||
| 4 | 30" | 30" | __ | __ | 16"-20" | 2" | 68 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Step Ladders
Fold these ladders for easy transport and storage.
Fiberglass ladders are nonconductive for use in electrical work. They have slots on the top to hold your tools. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Ladders with shelf can hold larger objects such as paint cans.
Aluminum ladders are lighter than wood or fiberglass, making them easier to move between work areas. They have slots on the top to hold your tools and a shelf to hold larger objects such as paint cans. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.
Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A), ft. | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wt., lbs. | No. of Steps | Material | Tread | Top Step Material | Specifications Met | Each | |
Fiberglass | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 4 | 20" | 29" | 1'11" | 16 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 22" | 30" | 1'11" | 16 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Fiberglass—With Shelf | |||||||||||
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 22" | 30" | 1'11" | 20 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Aluminum—With Shelf | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 4 | 20" | 30" | 1'11" | 11 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.2, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 000000 | 000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 21" | 30" | 1'11" | 16 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.2, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 000000 | 000000 |
Platform Step Ladders
These ladders have a large platform and a waist-high guardrail, making them safer and more comfortable than standard ladder rungs for prolonged standing and reaching. Fold for storage.
Note: The number of steps listed includes the platform.
Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders.
Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.
Type 1A ladders are tested to hold up to 300 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.
Overall | Platform | Step | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A), ft. | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wd. (E) | Dp. (F) | Material | Tread | Wt., lbs. | No. of Steps | Material | Tread | Specifications Met | Each | |
Fiberglass | ||||||||||||||
Type 1A (300-lb. Cap.) | ||||||||||||||
| 4 | 24" | 30" | 2' | 14 1/2" | 15" | Aluminum | Ribbed | 17 | 2 | Aluminum | Ribbed | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 |
Aluminum | ||||||||||||||
Type 1A (300-lb. Cap.) | ||||||||||||||
| 4 | 21" | 30" | 2' | 12 1/2" | 18" | Aluminum | Ribbed | 12 | 2 | Aluminum | Ribbed | ANSI A14.2, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Two-Side Access Step Ladders
With steps on both sides, you can climb these ladders from either side or have one person on each set of steps. The capacity listed is for each side of a ladder. Made of fiberglass, they are nonconductive for use in electrical work. They also fold up for compact storage. These ladders meet ANSI A14.5, which certifies dimensional and performance requirements for fiberglass ladders.
Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A), ft. | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wt., lbs. | No. of Steps | Material | Tread | Top Step Material | Specifications Met | Each | |
Fiberglass | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 4 | 20" | 36" | 2' | 19 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 20" | 38" | 1'11" | 19 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Convertible Step/Straight Ladders
More versatile than standard step ladders, these ladders can be safely leaned against flat surfaces, such as walls and machinery. Quickly convert to a step ladder by unlocking the rail latch to spread the rails apart. Nonmarring rubber bumpers prevent the ladder from slipping when leaned; a notch in the top step makes them safe to lean against poles and wall studs as well. Ladders have nonconductive fiberglass rails and slots on the top to hold your tools. Fold for storage.
ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the maximum climbing height when used as a straight ladder is one step lower than when used as a step ladder. Ladders also meet CAL-OSHA standards, which is required for use in California.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A), ft. | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wt., lbs. | No. of Steps | Material | Tread | Top Step Material | Specifications Met | Each | |
Fiberglass | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 4 | 21" | 25" | 1'8" | 16 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 21" | 25" | 1'8" | 16 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Rope Ladders
Attach one of these ladders to a fixed object and drop it into a tank, manhole, pit, or temporary work area. They’re lightweight, so you can easily carry them anywhere.
Ladders with 1 or 2 loop ends work well when you already have hooks you can slide the loops over. Otherwise, you’ll need to use carabiners or other hardware to secure these ladders to an anchor point.
Note: Check local, state, and federal codes, including OSHA, for safe set-up and operating practices.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | Cap., lbs. | Wt., lbs. | Rope Dia. | Loop ID | No.of Steps | Material | Tread | Each | |
Nylon Rope | |||||||||||
With 1 Loop End | |||||||||||
| 1'6" | 4 | 12" | 300 | 2 | 3/8" | 20" | 3 | Plastic | Ribbed | 00000000 | 000000 |
Folding Step Stools
Fold for easy transport and storage.
Aluminum stools are lighter weight than steel and fiberglass, making them easier to move between work areas. Style 5 stools can be climbed from both sides.
Stools with ribbed steps have good slip resistance and are gentle on your footwear.
Type 1A stools are tested to hold up to 300 lbs. Note: Step stools that meet OSHA or Cal/OSHA specifications adhere to dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Top Step | Middle Step | Bottom Step | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Steps | Cap., lbs. | Duty Rating | Ht. (A) | Wd. (B) | Dp. (C) | Ht. | Wd. | Dp. | Wd. | Dp. | Wd. | Dp. | Assembled or Unassembled | Specifications Met | Each | |
Aluminum | ||||||||||||||||
With Ribbed Steps | ||||||||||||||||
| 4 | 300 | Type 1A | 48" | 37" | 36" | 48" | 30" | 8" | 28" | 3 1/4" | 28" | 3" | Assembled | Cal/OSHA Compliant Title 8 Section 3276 ANSI A14.2 ANSI A14.11 | 00000000 | 0000000 |
Telescoping Multifunction Ladders
These ladders have movable sections that extend and collapse into one another, so you can adjust them to the height you need. Configure them into step ladders, straight ladders, or stairwell ladders.
Aluminum ladders are lighter than fiberglass ones, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders. Type 1AA ladders are tested to hold up to 375 lbs.
Add a work platform to stand comfortably for long periods. You can also set buckets and tools on it. The platform hooks onto the back of one rung and has a support that braces against the rung below.
Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Step | Ladders | ||||||
|---|---|---|---|---|---|---|---|
| Overall Ht. (Ladder Configuration) | Overall Wd. | No. of Steps | Material | Tread | Specifications Met | Each | |
Aluminum | |||||||
Type 1AA (375-lb. Cap.) | |||||||
| 4 ft.-7 ft. (Step), 8 ft.-14 ft. (Straight), 4 ft. (Scaffold) | 24" | 14 | Aluminum | Ribbed | ANSI A14.2, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 0000000 |
| Work Platform (11" Wd. × 11" Dp.) | 00000000 | Each | 000000 |