Sectional Wall-Mount Ladders
Ladders can be connected to create the height you need. They have textured steps for slip resistance.
Ladders with built-in connectors have built-in splices, so they can be connected to each other. Note: The first rung of the ladder cannot be more than 12" from the floor.
300-lb. capacity ladders use the connecting kit (sold separately) to connect ladders with no drilling required. Mount to the wall with the mounting bracket kit (sold separately). When ladder heights are greater than 20 feet from the floor to the top rung, a ladder cage can help prevent falls.
Connecting kits (sold separately) include splice plates and fasteners. Order one connecting kit for each additional ladder section.
Mounting bracket kits (sold separately) offset the ladder 7" for toe clearance. Kits include fasteners to mount brackets to the ladder; fasteners to mount brackets to a surface are not included. Two kits are recommended for 4-, 5-, and 8-foot ladders; three kits are recommended for the 10-foot ladder. If connecting multiple ladders, one mounting bracket kit is required for each additional ladder section.
Mounting bracket kits without mounting holes must be drilled to the desired bolt hole size to mount to your surface, so you can adapt it to your needs. For instance, use U-bolts (not included) to connect ladder to pipes.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
with Built-In
Connectors
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | Wt., lbs. | No. of Steps | Step Tread | Projection | Mounting Hardware Included | No. of | Lg. | Wd. | No. of Mounting Brackets | Features | Specifications Met | Each | |
Galvanized Steel | |||||||||||||||
250-lb. Capacity | |||||||||||||||
| 3'6" | 4 | 20" | 11 | 4 | Perforated | 7" | No | 4 | 3/4" | 13/32" | 4 | Built-In Connectors | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 0000000 |
300-lb. Capacity | |||||||||||||||
| 3'6" | 4 | 20" | 17 | 4 | Knurled | 7" | No | __ | __ | __ | __ | __ | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 000000 |
Step Ladders

Fold these ladders for easy transport and storage. They have ribbed steps to keep you from slipping. Slots in the top are made for holding tools.
Fiberglass ladders are nonconductive, so you can use them for electrical work. Aluminum ladders are lighter than fiberglass ladders, so they’re easier to move between work areas.
Type 1 ladders are tested to hold up to 250 lbs. Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Ladders with a shelf can hold larger objects, such as paint cans.
Note: Ladders meet ANSI, OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A), ft. | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wt., lbs. | No. of Steps | Material | Tread | Top Step Material | Specifications Met | Each | |
Fiberglass | |||||||||||
Type 1 (250-lb. Cap.) | |||||||||||
| 4 | 19" | 29" | 1'11" | 13 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Type 1A (300-lb. Cap.) | |||||||||||
| 4 | 20" | 29" | 1'11" | 16 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 22" | 30" | 1'11" | 16 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Fiberglass—With Shelf | |||||||||||
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 22" | 30" | 1'11" | 20 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Aluminum—With Shelf | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 4 | 20" | 30" | 1'11" | 11 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.2, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 000000 | 000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 21" | 30" | 1'11" | 16 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.2, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 000000 | 000000 |
Platform Step Ladders



No need to balance on narrow rungs—these step ladders have a large platform to keep you comfortable while you work. They also have a guardrail, so they’re safer than standard step ladders. The platform and steps have a ribbed surface to keep you from slipping. Fold these ladders for storage. The number of steps listed includes the platform.
Fiberglass ladders are nonconductive, so you can use them for electrical work. Aluminum ladders weigh less than fiberglass ladders, so they’re easier to move between work areas.
Type 1A ladders are tested to hold up to 300 lbs. Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Platform | Step | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht., ft. | Wd. | Dp. | Max. Climbing Ht. | Ht. | Wd. | Dp. | Material | Tread | Wt., lbs. | No. of Steps | Material | Tread | Specifications Met | Each | |
Fiberglass | |||||||||||||||
Type 1A (300-lb. Cap.) | |||||||||||||||
| 4 | 24" | 30" | 2' | 2' | 14 1/2" | 15" | Aluminum | Ribbed | 17 | 2 | Aluminum | Ribbed | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 0000000 |
Aluminum | |||||||||||||||
Type 1A (300-lb. Cap.) | |||||||||||||||
| 4 | 21" | 30" | 2' | 2' | 12 1/2" | 18" | Aluminum | Ribbed | 12 | 2 | Aluminum | Ribbed | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.2 | 0000000 | 000000 |
Two-Side Access Step Ladders

With steps on both sides, you can climb these ladders from either side or have one person on each set of steps. The capacity listed is for each side of a ladder. Made of fiberglass, they are nonconductive for use in electrical work. They also fold up for compact storage. These ladders meet ANSI A14.5, which certifies dimensional and performance requirements for fiberglass ladders.
Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A), ft. | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wt., lbs. | No. of Steps | Material | Tread | Top Step Material | Specifications Met | Each | |
Fiberglass | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 4 | 20" | 36" | 2' | 19 | 3 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
| 4 | 20" | 38" | 1'11" | 19 | 3 | Aluminum | Ribbed | Aluminum | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Rope Ladders

Attach one of these ladders to a fixed object and drop it into a tank, manhole, pit, or temporary work area. They’re lightweight, so you can easily carry them anywhere.
Ladders with 1 or 2 loop ends work well when you already have hooks you can slide the loops over. Otherwise, you’ll need to use carabiners or other hardware to secure these ladders to an anchor point.
Note: Check local, state, and federal codes, including OSHA, for safe set-up and operating practices.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | Cap., lbs. | Wt., lbs. | Rope Dia. | Loop ID | No.of Steps | Material | Tread | Each | |
Nylon Rope | |||||||||||
With 1 Loop End | |||||||||||
| 1'6" | 4 | 12" | 300 | 2 | 3/8" | 20" | 3 | Plastic | Ribbed | 00000000 | 000000 |
Folding Step Stools

Fold for easy transport and storage.
Aluminum stools are lighter weight than steel and fiberglass, making them easier to move between work areas. Style 5 stools can be climbed from both sides.
Stools with ribbed steps have good slip resistance and are gentle on your footwear.
Type 1A stools are tested to hold up to 300 lbs. Note: Step stools that meet OSHA or Cal/OSHA specifications adhere to dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Overall | Top Step | Middle Step | Bottom Step | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Steps | Cap., lbs. | Duty Rating | Ht. (A) | Wd. (B) | Dp. (C) | Ht. | Wd. | Dp. | Wd. | Dp. | Wd. | Dp. | Assembled or Unassembled | Specifications Met | Each | |
Aluminum | ||||||||||||||||
With Ribbed Steps | ||||||||||||||||
| 4 | 300 | Type 1A | 48" | 37" | 36" | 48" | 30" | 8" | 28" | 3 1/4" | 28" | 3" | Assembled | Cal/OSHA Compliant Title 8 Section 3276 ANSI A14.2 ANSI A14.11 | 00000000 | 0000000 |

























