Often used on loading docks, these ladders mount to the top of a wall or ledge. Made of powder-coated steel, they’re both rust resistant and durable enough for frequent use. Serrated steps prevent slipping.

Add a safety chain to deter access to these ladders. It spans the width of the ladder.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Move these sturdy ladders easily between your work areas. You are responsible for adhering to local, state, and federal safety codes, including OSHA.

Note: The number of steps listed includes the platform.

Diamond steps have an open-grid design for drainage. Serrated steps provide maximum slip resistance but are uncomfortable to stand on for prolonged periods.

Spring-loaded casters stay stationary while in use—when you step on, the casters retract; when you step off, the casters roll again.

Aluminum is lighter than steel and stainless steel, making these ladders easier to roll between work areas. You are responsible for adhering to local, state, and federal safety codes, including OSHA.

Note: The number of steps listed includes the platform.

Ribbed steps are grooved for some slip resistance and are more comfortable than serrated. Serrated steps provide maximum slip resistance.

Spring-loaded casters stay stationary while in use—when you step on, the casters retract; when you step off, the casters roll again.

Tilt these ladders to roll them on their wheels. When you set them upright again, the wheels lift off the floor to keep them stationary while in use. Made of powder-coated steel, these ladders are durable enough for regular use. The number of steps listed includes the platform.

Style A ladders have a bar across the top platform for added support and stability.

Style B ladders have an open top for access to an elevated surface. A chain secures the opening when not in use.

Diamond steps have an open grid that lets liquids, such as oil, and dirt pass through. Serrated steps also have an open grid but have sharper treads to prevent slipping. Without work boots, standing on them for extended periods may be uncomfortable. Perforated steps give you good slip resistance and allow liquid from wet shoes to drain through.

Note: Ladders that have OSHA or Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Aluminum is lighter than steel and stainless steel, making these ladders easier to roll between work areas. Platform and steps are serrated for maximum slip resistance. Tilt these ladders to roll them on their wheels. When you set the ladders upright again, the wheels lift off the floor to keep ladders stationary while in use.

Note: The number of steps listed includes the platform.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Made of 304 stainless steel, these ladders are more corrosion resistant than steel and aluminum ladders. They withstand wet environments and repeated washdowns. Tilt these ladders to roll them on their wheels. When you set the ladders upright again, the wheels lift off the floor to keep them stationary while in use. The number of steps listed includes the platform.

Diamond steps have an open grid that lets liquids, such as oil, and dirt pass through better than serrated steps. Without raised treads, they’re comfortable to stand on—even when you’re not wearing work boots. Serrated steps have sharp, raised treads that give you better slip resistance than diamond steps. However, standing on them for extended periods without work boots may be uncomfortable.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Move freely as you work—these ladders have a more spacious platform than standard platform ladders. They have enough room and load capacity for boxes and tools, so you won’t have to climb up and down as often. When you do, it’ll feel more like climbing stairs—these ladders aren’t as steep as standard options. The platform and steps are serrated to prevent slipping and allow liquids and debris to pass through. Without work boots, standing on them for extended periods may be uncomfortable. Use the step lock to keep casters stationary. The number of steps listed includes the platform.

Platforms that are 36" or 48" deep are large enough for two people to work side by side.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Get close to your work even when pipes or other objects are in the way. With no horizontal braces, these ladders can straddle obstructions. Platform and steps have a diamond texture for good slip resistance. Tilt these ladders to roll them on their wheels. When you set the ladders upright again, the wheels lift off the floor to keep ladders stationary while in use.

Note: The number of steps listed includes the platform.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Fold these ladders for easy transport and storage. They have ribbed steps to keep you from slipping. Slots in the top are made for holding tools.

Fiberglass ladders are nonconductive, so you can use them for electrical work. Aluminum ladders are lighter than fiberglass ladders, so they’re easier to move between work areas.

Type 1 ladders are tested to hold up to 250 lbs. Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.

Ladders with a shelf can hold larger objects, such as paint cans.

Note: Ladders meet ANSI, OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

No need to balance on narrow rungs—these step ladders have a large platform to keep you comfortable while you work. They also have a guardrail, so they’re safer than standard step ladders. The platform and steps have a ribbed surface to keep you from slipping. Fold these ladders for storage. The number of steps listed includes the platform.

Aluminum ladders weigh less than fiberglass ladders, so they’re easier to move between work areas.

Type 1A ladders are tested to hold up to 300 lbs. Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

With a large platform and a guardrail, these ladders are safer and more comfortable to work on than standard ladders. Casters in the base let you wheel them between tasks. The casters are spring-loaded—they retract when you step on the ladder to keep it stationary. When you step off, they roll again. The steps and platform have a ribbed surface to keep you from slipping. Made from nonconductive fiberglass, these ladders are safe to use for electrical work. They’re Type 1A, which means they’re tested for holding up to 300 lbs. Fold them for storage. The number of steps listed includes the platform.

Enclose the platform with a safety gate for extra security. With rails on all sides, you can work with both hands and reach in any direction. Swing the front of the gate open to step onto the platform, then latch it behind you. When it’s not in use, the gate folds against the ladder. To install, drill holes in the ladder rails and attach the gate with the included hardware.

Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

With steps on both sides, you can climb these ladders from either side or have one person on each set of steps. The capacity listed is for each side of a ladder. Made of fiberglass, they are nonconductive for use in electrical work. They also fold up for compact storage. These ladders meet ANSI A14.5, which certifies dimensional and performance requirements for fiberglass ladders.

Type 1A ladders are tested to hold up to 300 lbs.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

More versatile than standard step ladders, these ladders can be folded and used as straight ladders. Lean them against walls or use the notched top cap to lean them against poles or studs for safe climbing. The top cap has slots to hold your tools. These ladders have nonconductive fiberglass rails, and the steps are ribbed for good slip resistance.

They’re Type 1AA, which means they’re tested for holding up to 375 lbs.

Style 2 can also be extended—just swing the rear legs up. When these ladders are extended, you can use the top cap as a step. When used as a step ladder, the rear legs fit between studs spaced 16" on center, so you can get closer to your work.

Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Install these platforms for easy access to elevated areas. They’re large enough to provide plenty of space for working. Platform and steps are serrated for maximum slip resistance and to allow dirt and debris to fall through. Without work boots, standing on them for extended periods may be uncomfortable. The number of steps listed includes the platform.

Styles 1-5 allow you to lower the platform up to 3" by sliding the U-bolts.

Styles 2 and 3 are open on one side. They’re often used beside conveyors or assembly stations.

Styles 4 and 5 have handrails on multiple sides of the platform to reduce fall risk.

Note: Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Also Available: Other platform sizes. Please select 8031T999 and specify style number, platform size, and platform height.