Wall-Mount Ladders
Mount these ladders to the wall for access to mezzanines, roofs, and other elevated areas. The first step is 9" off the floor.
Steel ladders are durable to handle most work environments. Their powder coating protects against rust. Serrated steps give you maximum slip resistance.
Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe setup and operating practices.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht. | Wd. | Wt., lbs. | No. of Steps | Color | Step Shape | Step Tread | Projection | Mounting Hardware Included | No. of | Dia. | No. of Mounting Brackets | Specifications Met | Each | |
Powder-Coated Steel | |||||||||||||||
350-lb. Capacity | |||||||||||||||
| 6'9" | 7' | 17" | 62 | 7 | Gray | Flat | Serrated | 7" | No | 2 | 7/16" | 2 | Cal/OSHA Compliant Title 8 Section 3277, OSHA Compliant 29 CFR 1910.23 | 00000000 | 0000000 |
Ladder Cages
Feel secure on tall ladders. These cages surround the ladder to help reduce the risk of falls. Made of powder-coated steel, they resist rust, so you can use them outdoors. Each section is fully welded and mounts to the side rails of stationary ladders. They don’t mount to walls or other cages. For a complete assembly, you’ll need at least one middle/top section and one bottom section.
Middle/top sections make your cage longer. They can also act as a top section when your ladder system includes a hatch. Yellow cages stand out in busy areas.
Note: Ladder cages meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Cage | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Overall Ht., ft. | Wd. | Dp. | For Ladder Wd. | Max. Ladder Rail Dp. | Wt., lbs. | Mounting Hardware Included | Specifications Met | Each | |
Gray | |||||||||
Powder-Coated Steel | |||||||||
Middle/Top Section | |||||||||
| 7 | 30" | 30" | 16"-20" | 2" | 110 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 0000000 |
Yellow | |||||||||
Powder-Coated Steel | |||||||||
Middle/Top Section | |||||||||
| 7 | 30" | 30" | 16"-20" | 2" | 110 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Top-Mount Ladders
Often used on loading docks, these ladders mount to the top of a wall or ledge. Made of powder-coated steel, they’re both rust resistant and durable enough for frequent use. Serrated steps prevent slipping.
Add a safety chain to deter access to these ladders. It spans the width of the ladder.
Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Ladders | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Holes | Safety Chains | ||||||||||||||||
| Max. Climbing Ht. (A) | Ht. (B), ft. | Wd. (C) | Dp. (D) | Wt., lbs. | No. of Steps | Color | Step Tread | Grab Post Ht. | Projection | Mounting Hardware Included | No. of | Dia. | No. of Mounting Brackets | Specifications Met | Each | Each | ||
Powder-Coated Steel | ||||||||||||||||||
300-lb. Capacity | ||||||||||||||||||
| 3'6" | 7 | 28" | 17" | 53 | 4 | Gray | Serrated | 42" | 7" | No | 8 | 3/8" | 4 | Cal/OSHA Compliant Title 8 Section 3277, OSHA Compliant 29 CFR 1910.23 | 0000000 | 0000000 | 0000000 | 000000 |
Step Ladders
Fold these ladders for easy transport and storage. They have ribbed steps to keep you from slipping. Slots in the top are made for holding tools.
Fiberglass ladders are nonconductive, so you can use them for electrical work. Type 1A ladders are tested to hold up to 300 lbs. Ladders with a shelf can hold larger objects, such as paint cans.
Note: Ladders meet ANSI, OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Step | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A), ft. | Wd. (B) | Dp. (C) | Max. Climbing Ht. (D) | Wt., lbs. | No. of Steps | Material | Tread | Top Step Material | Specifications Met | Each | |
Fiberglass | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 7 | 25" | 48" | 4'9" | 26 | 6 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 |
Fiberglass—With Shelf | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
| 7 | 25" | 48" | 4'9" | 29 | 6 | Aluminum | Ribbed | Plastic | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Platform Step Ladders
No need to balance on narrow rungs—these step ladders have a large platform to keep you comfortable while you work. They also have a guardrail, so they’re safer than standard step ladders. The platform and steps have a ribbed surface to keep you from slipping. Fold these ladders for storage. The number of steps listed includes the platform.
Fiberglass ladders are nonconductive, so you can use them for electrical work. Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Enclose the platform with a safety gate for extra security. With rails on all sides, you can work with both hands and reach in any direction. Swing the front of the gate open to step onto the platform, then latch it behind you. When it’s not in use, the gate folds against the ladder. To install, drill holes in the ladder rails and attach the gate with the included hardware.
Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Ladders | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Platform | Step | Safety Gates | ||||||||||||||
| Ht., ft. | Wd. | Dp. | Max. Climbing Ht. | Ht. | Wd. | Dp. | Material | Tread | Wt., lbs. | No. of Steps | Material | Tread | Specifications Met | Each | Each | ||
Fiberglass | |||||||||||||||||
Type 1A (300-lb. Cap.) | |||||||||||||||||
| 7 | 28" | 44" | 4' | 4' | 16" | 19 1/2" | Aluminum | Ribbed | 28 | 4 | Aluminum | Ribbed | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 0000000 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | |||||||||||||||||
| 7 | 28" | 44" | 4' | 4' | 16" | 19 1/2" | Aluminum | Ribbed | 27 | 4 | Aluminum | Ribbed | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 000000 | 0000000 | 000000 |
Rolling Platform Step Ladders
With a large platform and a guardrail, these ladders are safer and more comfortable to work on than standard ladders. Casters in the base let you wheel them between tasks. The casters are spring-loaded—they retract when you step on the ladder to keep it stationary. When you step off, they roll again. The steps and platform have a ribbed surface to keep you from slipping. Made from nonconductive fiberglass, these ladders are safe to use for electrical work. They’re Type 1A, which means they’re tested for holding up to 300 lbs. Fold them for storage. The number of steps listed includes the platform.
Enclose the platform with a safety gate for extra security. With rails on all sides, you can work with both hands and reach in any direction. Swing the front of the gate open to step onto the platform, then latch it behind you. When it’s not in use, the gate folds against the ladder. To install, drill holes in the ladder rails and attach the gate with the included hardware.
Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Ladders | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Platform | Step | Safety Gates | |||||||||||||||||
| Ht., ft. | Wd. | Dp. | Max. Climbing Ht. | Ht. | Wd. | Dp. | Material | Tread | Wt., lbs. | No. of Steps | Material | Tread | Wheel Configuration | Brake Type | Weight Actuation Type | Specifications Met | Each | Each | ||
Fiberglass | ||||||||||||||||||||
Type 1A (300-lb. Cap.) | ||||||||||||||||||||
| 7 | 28" | 44" | 4' | 4' | 16" | 19 1/2" | Aluminum | Ribbed | 34 | 4 | Aluminum | Ribbed | Four Swivel Casters | Weight Actuated | Spring-Loaded Casters | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 0000000 | 0000000 | 0000000 |
Hook-Top Straight Ladders
Hooks along the top hold these ladders in place. These steel ladders are durable to handle most work environments.
Swivel safety shoes (sold separately) are recommended when using ladders on floors.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Fixed Work Platforms
Install these platforms for easy access to elevated areas. They’re large enough to provide plenty of space for working. Platform and steps are serrated for maximum slip resistance and to allow dirt and debris to fall through. Without work boots, standing on them for extended periods may be uncomfortable. The number of steps listed includes the platform.
Styles 1-5 allow you to lower the platform up to 3" by sliding the U-bolts.
Styles 2 and 3 are open on one side. They’re often used beside conveyors or assembly stations.
Styles 4 and 5 have handrails on multiple sides of the platform to reduce fall risk.
Note: Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Also Available: Other platform sizes. Please select 8031T999 and specify style number, platform size, and platform height.
Platform | Overall | Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Ht. (A) | Min. Ht. | Ground Clearance Ht. (B) | No. of Steps | Cap., lbs. | Ht. (C) | Wd. (D) | Dp. (E) | Wd. | Dp. | Assembled or Unassembled | Specifications Met | Each | |
Gray Powder-Coated Steel | |||||||||||||
36" Platform Wd. × 39" Platform Dp. | |||||||||||||
| 45" | 42" | 36 1/4" to 39 1/4" | 4 | 500 | 7' | 39" | 5'6" | 36" | 9 1/2" | Unassembled | Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28 | 0000000 | 000000000 |
36" Platform Wd. × 77" Platform Dp. | |||||||||||||
| 45" | 42" | 36 1/4" to 39 1/4" | 4 | 500 | 7' | 39" | 8'8" | 36" | 9 1/2" | Unassembled | Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28 | 0000000 | 00000000 |
Platform | Overall | Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Ht. (A) | Min. Ht. | Ground Clearance Ht. (B) | No. of Steps | Cap., lbs. | Ht. (C) | Wd. (D) | Dp. (E) | Wd. | Dp. | Assembled or Unassembled | Specifications Met | Each | |
Gray Powder-Coated Steel | |||||||||||||
36" Platform Wd. × 39" Platform Dp. | |||||||||||||
| 45" | 42" | 36 1/4" to 39 1/4" | 4 | 500 | 7' | 39" | 7'9" | 36" | 9 1/2" | Unassembled | Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28 | 0000000 | 000000000 |
Platform | Overall | Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Ht. (A) | Min. Ht. | Ground Clearance Ht. (B) | No. of Steps | Cap., lbs. | Ht. (C) | Wd. (D) | Dp. (E) | Wd. | Dp. | Assembled or Unassembled | Specifications Met | Each | |
Gray Powder-Coated Steel | |||||||||||||
36" Platform Wd. × 39" Platform Dp. | |||||||||||||
| 45" | 42" | 36 1/4" to 39 1/4" | 4 | 500 | 7' | 39" | 5'5" | 36" | 9 1/2" | Unassembled | Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28 | 0000000 | 000000000 |
36" Platform Wd. × 77" Platform Dp. | |||||||||||||
| 45" | 42" | 36 1/4" to 39 1/4" | 4 | 500 | 7' | 39" | 8'8" | 36" | 9 1/2" | Unassembled | Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28 | 0000000 | 00000000 |
| For Style | For Platform Dp. | Each | |
| 1, 2, 3, 4, 5 | 39", 77" | 00000000 | 0000000 |
| For Style | For No. of Steps | Each | |
| 1, 2, 3, 4, 5 | 2, 3, 4 | 00000000 | 0000000 |
