Mount these ladders to the wall for access to mezzanines, roofs, and other elevated areas. The first step is 9" off the floor.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe setup and operating practices.

Straight ladders are ready for use without unfolding or adjusting.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices. Per OSHA regulations, the ladder rails must rise at least 3 ft. above the elevated surface being accessed.

Ladders can be connected to create the height you need. They have textured steps for slip resistance.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

With steps on both sides, you can climb these ladders from either side or have one person on each set of steps. The capacity listed is for each side of a ladder. Made of fiberglass, they are nonconductive for use in electrical work. They also fold up for compact storage. These ladders meet ANSI-ASC A14.5, which certifies dimensional and performance requirements for fiberglass ladders.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

No need to balance on narrow rungs—these step ladders have a large platform to keep you comfortable while you work. They also have a guardrail, so they’re safer than standard step ladders. The platform and steps have a ribbed surface to keep you from slipping. Fold these ladders for storage. The number of steps listed includes the platform.

Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Ladder Safety Gates—Enclose the platform with a safety gate for extra security. With rails on all sides, you can work with both hands and reach in any direction. Swing the front of the gate open to step onto the platform, then latch it behind you. When it’s not in use, the gate folds against the ladder. To install, drill holes in the ladder rails and attach the gate with the included hardware.

Use these ladders to climb in and out of tight, narrow places. They are also known as manhole ladders.

Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed.

The large platform is more comfortable than a step for prolonged standing. With steps on both sides, you can climb from either side or have one person on each side. Type 1A ladders are tested to support up to 300 lbs on each side. Fold for storage.

Note: The number of steps listed includes the platform.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

Grip the handrail for stability. Ladders have spring-loaded casters, which stay stationary while in use—when you step on, the casters retract; when you step off, the casters roll again. Platform and steps are vinyl coated for good slip resistance and comfort. Shipped assembled, except the handrail requires assembly.

Note: The number of steps listed includes the platform.

Note: Ladders that have OSHA or Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

These ladders meet Fed. Std. Class 100 and ISO Class 5 clean room requirements. All are 316 stainless steel to withstand repeated washdowns. They have an electropolished finish and seamless welds, so there are no cracks or crevices that can harbor dust, dirt, and bacteria. They also have nonmarring leveling feet and wheels. Use the slots on the top to hold your tools. Fold them for compact storage and easy transport; tilt to roll them on their wheels.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices.

With spring-loaded casters, these ladders are easy to move between work areas. When you're on the ladder, the casters retract to keep the ladder stationary. When you step off, the casters roll again. The large platform is more comfortable than a step for prolonged standing. With steps on both sides, you can climb from either side or have one person on each side. Type 1A ladders are tested to support up to 300 lbs on each side. Fold for storage.

Note: The number of steps listed includes the platform.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

Use these ladders in tight spaces where four-legged ladders won’t fit, such as between machinery and in corners. They have nonconductive fiberglass rails. They also have slots on the top to hold your tools. Ladders fold for storage.

ANSI-ASC A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1A ladders are tested to hold up to 300 lbs.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

With a large platform and a guardrail, these ladders are safer and more comfortable to work on than standard ladders. Casters in the base let you wheel them between tasks. The casters are spring-loaded—they retract when you step on the ladder to keep it stationary. When you step off, they roll again. The steps and platform have a ribbed surface to keep you from slipping. Made from nonconductive fiberglass, these ladders are safe to use for electrical work. They’re Type 1A, which means they’re tested for holding up to 300 lbs. Fold them for storage. The number of steps listed includes the platform.

Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Ladder Safety Gates—Enclose the platform with a safety gate for extra security. With rails on all sides, you can work with both hands and reach in any direction. Swing the front of the gate open to step onto the platform, then latch it behind you. When it’s not in use, the gate folds against the ladder. To install, drill holes in the ladder rails and attach the gate with the included hardware.