McMaster-Carr logo
    Filter by
    System of Measurement
    Number of Steps
    Ground Clearance Height
    Platform Tread
    Platform Width
    Maximum Climbing Height
    Attribute Image
    Weight Capacity
    Step Shape
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    50 Products

    Extended-Reach Rolling Platform Ladders

    With a work platform that extends beyond the base, these rolling ladders—also known as cantilever ladders—provide access to hard-to-reach areas, such as the top of large tanks and over conveyors. Wheel brakes keep these ladders stationary while in use. The number of steps listed includes the platform. Shipped assembled, except the handrails and base require assembly.
    Note: All ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Powder-Coated Steel Ladders with Counterbalanced Base
    Image of ProductInUse. Counterbalaned Base. Front orientation. Counterbalanced Base. Extended-Reach Rolling Platform Ladders.

    Counterbalaned Base

    Image of Attribute. Front orientation. Contains Annotated. Extended-Reach Rolling Platform Ladders, Powder-Coated Steel Ladders with Counterbalanced Base.
    Image of Attribute. Front orientation. Contains Annotated, Border. Extended-Reach Rolling Platform Ladders.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Perforated Step. Extended-Reach Rolling Platform Ladders.

    Perforated Step

    Image of Specification. Front orientation. Contains Border. Serrated Step. Extended-Reach Rolling Platform Ladders.

    Serrated Step

    Counterbalanced-base ladders use a counterweight to stay stable, so their base isn’t as long as an extended base. As a result, it’s easier to position these ladders over tanks and other equipment where there isn’t room to slide the base underneath. Place the counterweight near the first step before use.
    Perforated Step—For regular indoor use, choose a perforated tread. It has raised holes to keep you from slipping.
    Serrated Step—For dirty jobsites, choose a serrated tread so debris falls through the steps. It has a sharp, raised surface for the highest level of slip resistance. The surface also scrapes mud from your work boots as you climb. Without boots, you may be uncomfortable standing for long periods.
    Conversion Kits—Conversion kits turn counterbalanced-base ladders into extended-base ladders, eliminating the need for a counterweight. Without a counterweight, these ladders are easier to move.
    Ladders
    Conversion Kits
    Replacement
    Rigid Casters
    Replacement
    Swivel Casters
    Replacement Casters (Two
    Swivel and Two Rigid)
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    (E)
    Dp.
    (F)
    Max. Climbing
    Ht.
    Ht.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    Overhang
    Dp.
    Ground Clearance
    Ht.
    Color
    Wheel
    Configuration
    Brake Type
    Assembly
    Specs. Met
    Each
    Each
    No. of
    Casters
    Each
    No. of
    Casters
    Each
    Each
    Perforated Steps and Platform
    550"24"40"50"92"30"84"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N110000000004250N21000000014250N3200000014250N3100000004250N370000000
    65 ft.24"40"5 ft.102"30"92"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N12000000004250N2100000014250N320000014250N310000004250N37000000
    770"24"40"70"112"30"101"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N13000000004250N2100000014250N320000014250N310000004250N37000000
    880"24"40"80"122"30"109"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N14000000004250N2100000014250N320000014250N310000004250N37000000
    990"24"40"90"11 ft.30"117"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N16000000004250N2100000014250N320000014250N310000004250N37000000
    1099"24"42"99"138"32"113"30042"6 3/4"GrayTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N4600000000———014250N350000014250N36000004250N33000000
    11110"24"42"110"148"32"119"30042"6 3/4"GrayTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N4700000000———014250N350000014250N36000004250N33000000
    1210 ft.24"42"10 ft.159"32"126"30042"6 3/4"GrayTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N4800000000———014250N350000014250N36000004250N33000000
     
    Serrated Steps and Platform
    550"24"40"50"92"30"84"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N41000000004250N2100000014250N320000014250N310000004250N37000000
    65 ft.24"40"5 ft.102"30"92"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N42000000004250N2100000014250N320000014250N310000004250N37000000
    770"24"40"70"112"30"101"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N43000000004250N2100000014250N320000014250N310000004250N37000000
    880"24"40"80"122"30"109"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N44000000004250N2100000014250N320000014250N310000004250N37000000
    990"24"40"90"11 ft.30"117"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N45000000004250N2100000014250N320000014250N310000004250N37000000
     
    Powder-Coated Steel Ladders with Extended Base
    Image of ProductInUse. Extended Base. Front orientation. Extended Base. Extended-Reach Rolling Platform Ladders.

    Extended Base

    Image of Attribute. Front orientation. Contains Annotated. Extended-Reach Rolling Platform Ladders, Powder-Coated Steel Ladders with Extended Base.
    Image of Attribute. Front orientation. Contains Annotated, Border. Extended-Reach Rolling Platform Ladders.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Perforated Step. Extended-Reach Rolling Platform Ladders.

    Perforated Step

    Extended-base ladders don’t have a counterweight, so they’re easier to push around than counterbalanced-base ladders. Their base is longer than a counterbalanced base—but it’s only 8 1/4" high, so it can be rolled underneath conveyors and other machinery.
    Perforated Step—For regular indoor use, choose a perforated tread. It has raised holes to keep you from slipping.
    Counterweights—Add a counterweight to turn these ladders into counterbalanced-base ladders. With a counterweight in place, you can remove the front base extension and install the front casters on the base section under the stairs.
    Ladders
    Counterweights
    Replacement
    Rigid Casters
    Replacement
    Swivel Casters
    Replacement Casters (Two
    Swivel and Two Rigid)
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    (E)
    Dp.
    (F)
    Max. Climbing
    Ht.
    Ht.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    Overhang
    Dp.
    Ground Clearance
    Ht.
    Color
    Wheel
    Configuration
    Brake Type
    Assembly
    Specs. Met
    Each
    Each
    No. of
    Casters
    Each
    No. of
    Casters
    Each
    Each
    Perforated Steps and Platform
    550"24"40"50"92"41"84"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N510000000004250N22000000014250N3200000014250N3100000004250N370000000
    990"24"40"90"11 ft.41"117"30040"6 3/4"YellowTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N52000000004250N2200000014250N320000014250N310000004250N37000000
     
    Powder-Coated Steel Adjustable-Height Ladders with Counterbalanced Base
    Image of ProductInUse. Counterbalaned Base. Front orientation. Counterbalanced Base. Extended-Reach Rolling Platform Ladders.

    Counterbalaned Base

    Image of Attribute. Front orientation. Contains Annotated. Extended-Reach Rolling Platform Ladders, Powder-Coated Steel, Counterbalanced Base, Adjustable-Height Platform.
    Image of Attribute. Front orientation. Contains Annotated, Border. Extended-Reach Rolling Platform Ladders.
    Image of Specification. Front orientation. Contains Border. Serrated Step. Extended-Reach Rolling Platform Ladders.

    Serrated Step

    Adjustable-height ladders can be raised or lowered within a 4 ft. range to give you the right height for each job. Use the included leveling jack foot to keep these ladders level on uneven surfaces.
    Counterbalanced-base ladders use a counterweight to stay stable, so their base isn’t as long as an extended base. As a result, it’s easier to position these ladders over tanks and other equipment where there isn’t room to slide the base underneath. Place the counterweight near the first step before use.
    Serrated Step—For dirty jobsites, choose a serrated tread so debris falls through the steps. It has a sharp, raised surface for the highest level of slip resistance. The surface also scrapes mud from your work boots as you climb. Without boots, you may be uncomfortable standing for long periods.
    Ladders
    Replacement
    Leveling Jacks
    Replacement Casters (Two
    Swivel and Two Rigid)
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    (E)
    Dp.
    (F)
    Max. Climbing
    Ht.
    Ht.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    Overhang
    Dp.
    Ground Clearance
    Ht.
    Color
    Wheel
    Configuration
    Brake Type
    Assembly
    Specs. Met
    Each
    Each
    Each
    Serrated Steps and Platform
    788" to 140"24"48"140"130" to 182"69"108"30048"11"GrayTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N530000000004250N2300000004250N340000000
    11136" to 188"24"48"188"178" to 230"69"118"30048"11"GrayTwo Rigid Casters
    and Two Swivel
    Casters    		Wheel BrakePartially AssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D4250N54000000004250N230000004250N34000000
     

    Freestanding Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Freestanding Crossover Stairs.
    Move these stairs as you update your facility layout. Unlike other crossover stairs, they do not need to be bolted to the floor. Use them to walk over pipes and conveyors. Their one-piece welded design adds even more rigidity and structural strength.
    Powder-Coated Steel—Made of powder-coated steel, these stairs are rust resistant and durable for industrial use.
    Serrated Step—These stairs have a serrated platform and steps to prevent slipping. They also allow liquids and debris to pass through.
    Nonskid Feet—Nonskid rubber feet keep them stable when crossing.
    Specifications Met—Crossover stairs meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Crossover Stairs
    Replacement Ladder Feet
    Overall
    Ground
    Clearance
    Platform
    Step
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Assembly
    Features
    Specs. Met
    Each
    Material
    Pkg.
    Qty.
    Pkg.
    Gray Powder-Coated Steel
     
    Flat Step with Serrated Tread
    5 ft.30"58"28"10"30"24"24"24"7"350330"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N120000000Rubber
    		479975T99000000
    5 ft.30"82"28"32"30"24"48"24"7"350330"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1500000000Rubber
    		479975T9900000
    70"30"76"38"10"40"24"24"24"7"350430"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1300000000Rubber
    		479975T9900000
    70"30"100"38"32"40"24"48"24"7"350430"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1600000000Rubber
    		479975T9900000
    80"30"93"48"10"50"24"24"24"7"350542"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1400000000Rubber
    		479975T9900000
    80"30"116"48"32"50"24"48"24"7"350542"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1100000000Rubber
    		479975T9900000
     

    Rolling Work Platforms

    Equipped with four casters, these platforms are easy to move between work areas. When you stand on these platforms, the spring-loaded casters automatically retract for a stable surface.
    Style 2
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Rolling Work Platforms, Style 2.
    Style 2 have handrails on both sides and guardrails around the platform for extra stability.
    Powder-Coated Steel—Powder-coated steel platforms withstand heavy use in most industrial applications and resist rust.
    Serrated Step—Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Swivel Casters
    Replacement
    Rigid Casters
    Replacement
    Nonskid Ladder Feet
    Platform
    Overall
    Steps
    Max. Platform
    Ht.
    Wd.
    Dp.
    Wd.
    (B)
    Dp.
    (C)
    Wd.
    Dp.
    Tread
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Wheel Configuration
    Features
    Specs. Met
    Each
    Each
    Each
    Material
    Each
    Gray Powder-Coated Steel
     
    56" Overall Height (A)
    20"24"35"34"54"24"10"Serrated80091AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N2400000009248N280000009261N15000000Rubber
    		9261N16000000
    20"24"47"34"66"24"10"Serrated80098AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N250000009248N28000009261N1500000Rubber
    		9261N1600000
    20"36"35"40"54"36"10"Serrated800122AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N260000009248N28000009261N1500000Rubber
    		9261N1600000
    20"36"47"40"66"36"10"Serrated800148AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N270000009248N28000009261N1500000Rubber
    		9261N1600000
     
    Style 3
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Rolling Work Platforms, Style 3.
    Style 3 have a handrail on only one side for unrestricted access to a conveyor or machinery.
    Aluminum—Aluminum platforms are lighter weight than steel platforms and resist corrosion.
    Serrated Step—Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platform
    Overall
    Steps
    Max. Platform
    Ht.
    Wd.
    Dp.
    Wd.
    (B)
    Dp.
    (C)
    Wd.
    Dp.
    Tread
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Wheel
    Configuration
    Features
    Specs. Met
    Each
    Aluminum
     
    50" Overall Height (A)
    20"24"24"28"46"24"10 1/2"Serrated50040UnassembledFour Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8561T10000000
    20"24"39 1/2"28"62"24"10 1/2"Serrated50050UnassembledFour Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8561T2000000
     

    Tilt-to-Roll Work Platforms

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Tilt-to-Roll Work Platforms.
    Image of Specification. Front orientation. Contains Border. Serrated Step. Tilt-to-Roll Work Platforms.

    Serrated Step

    Tip these platforms onto their casters to roll them wherever you need them—they give you a step up to your work and a large surface to stand on.
    Powder-Coated Steel—Made from steel, these platforms are durable enough to last on shop floors or assembly lines. Their powder coating helps prevent rust.
    Serrated—The surface is serrated to prevent slips and allow liquid and debris to fall through.
    Nonskid Feet—When you set them down, their rubber feet grip the floor and keep them from moving.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Rigid Casters
    Replacement
    Nonskid Ladder Feet
    Platform
    Overall
    Steps
    Wd.
    (C)
    Dp.
    (D)
    Tread
    Wd.
    (A)
    Dp.
    (B)
    Wd.
    (E)
    Dp.
    (F)
    Tread
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Wheel
    Configuration
    Features
    Specs. Met
    Each
    Each
    Material
    Each
    Gray Powder-Coated Steel
     
    20" High
    24"35"Serrated30"46"24"10"Serrated80065AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N1100000009261N15000000Rubber
    		9261N16000000
    24"47"Serrated30"58"24"10"Serrated80072AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N120000009261N1500000Rubber
    		9261N1600000
    36"35"Serrated42"46"36"10"Serrated80088AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N130000009261N1500000Rubber
    		9261N1600000
    36"47"Serrated42"58"36"10"Serrated800112AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N140000009261N1500000Rubber
    		9261N1600000
     

    Overhead Access Work Platforms

    Image of ProductInUse. Front orientation. Work Platforms. Overhead Access Work Platforms.
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Overhead Access Work Platforms.
    Roll these platforms into place to access the tops of machinery, trucks, or tanks. They provide a stable surface to reach elevated or hard-to-access areas during maintenance. Unlike rolling scaffolds, these platforms have open guardrails on one side for direct access to equipment.
    A serrated platform prevents slipping and allows liquids and debris to pass through. Height adjusts in 4" increments.
    Yellow—They’re bright yellow to stand out in busy areas.
    Powder-Coated Steel—Made of powder-coated steel, these platforms are rust resistant and durable.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Replacement Jacks—Use jacks to level the platform on uneven ground.
    Platforms
    Replacement
    Swivel Casters
    Replacement
    Jacks
    Platform
    Overall
    Steps
    Ht. (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht. (D)
    Wd.
    (E)
    Dp.
    (F)
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    Guardrail
    Ht.
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Each
    Each
    Yellow Powder-Coated Steel
     
    Serrated Step
    103" to 115"120"24"145" to 157"152"50"103" to 115"1024"1 1/2"45042"Four Swivel Casters4UnassembledFour Outriggers, Four Screw JacksCal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3282, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D9215N1110000000009215N11200000009215N1130000000
     
    back to top