McMaster-Carr logo
    Filter by
    System of Measurement
    Step Shape
    Step Width
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    79 Products

    Wall-Mount Ladders with Welded-On Cage

    Image of Product. Front orientation. Ladders. Wall-Mount Ladders with Welded-On Cage.
    A cage is welded to these ladders for quick installation. The cage helps you feel secure on tall ladders—it surrounds the ladder to help reduce the risk of falls. Made of powder-coated steel, these ladders resist rust, so you can use them outdoors. Ribbed treads give you good slip resistance. These ladders come in sections no longer than 7ʹ for easy handling. Bolt sections together end to end with the included fasteners. The cage starts 7ʹ above the bottom of the ladder and extends beyond the top rung by 42".
    Note: Ladders and safety gates meet OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Ladder
    Cage
    Flared
    Cage
    Mounting
    Holes
    Max. Climbing
    Ht.
    Ht.
    Wd.
    Overall Ht.
    with Cage
    Wd.
    Dp.
    Wd.
    Dp.
    Wt.,
    lb.
    No. of
    Steps
    Step
    Tread
    Projection
    Mounting Hardware
    Included
    No.
    of
    Dia.
    No. of Mounting
    Brackets
    Specs. Met
    Each
    Gray Powder-Coated Steel
     
    300 lb. Capacity
    145"147"20"187 1/2"30"27"36 1/2"30"26013Ribbed7"No109/16"10ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.2980265T21000000000
    193"195"20"235 1/2"30"27"36 1/2"30"35017Ribbed7"No149/16"14ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.2980265T2500000000
    241"243"20"283 1/2"30"27"36 1/2"30"43021Ribbed7"No149/16"14ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.2980265T2900000000
    289"291"20"331 1/2"30"27"36 1/2"30"52025Ribbed7"No189/16"18ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.2980265T3400000000
    325"327"20"367 1/2"30"27"36 1/2"30"57528Ribbed7"No189/16"18ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.2980265T3700000000
     
    Accessories for Ladders
    Ladder Security Covers
    Image of Product. Front orientation. Ladder Security Covers. Wall-Mount Ladders with Welded-On Cage.
    Security covers prevent unauthorized access. They can be welded or bolted on (holes must be drilled) to open from the right side.
    Ht.,
    ft.
    Wd.
    Wt.,
    lb.
    Features
    Max. Padlock
    Shackle Dia.
    Mounting Hardware
    Included
    Each
    Gray Powder-Coated Steel
    620 7/8"41Padlockable Hasp13/32"Yes79745T360000000
     
    Ladder Safety Gates
    Image of ProductInUse. Front orientation. Ladder Safety Gates. Wall-Mount Ladders with Welded-On Cage.
    Safety gates prevent you from falling into the cage at the top of the ladder. A spring pulls the gate closed after someone passes through. Mount them to the cage’s handrail using the included hardware.
    Ht.
    Wd.
    Wt.,
    lb.
    Mounting Hardware
    Included
    Specs. Met
    Each
    Yellow Powder-Coated Steel
    21 5/8"24" to 40"24YesANSI/ASSP A1264.1, OSHA Compliant 29 CFR 1910 Subpart D80265T1110000000
     

    Top-Mount Stairs

    Image of ProductInUse. OSHA Compliant. Front orientation. Stairs. Top-Mount Stairs, OSHA Compliant 29 CFR 1910.29.
    Image of Attribute. Side1 orientation. Contains Annotated. Top-Mount Stairs.

    OSHA Compliant

    Image of Product. Front orientation. Stair Risers. Top-Mount Stairs.

    Stair Risers

    Mount these stairs to an elevated landing for easy access. They have adjustable mounting brackets to accommodate slight differences in landing heights. Steps are perforated to provide slip resistance that’s easy on your shoes.
    Note: Stairs meet OSHA and Cal/OSHA, or IBC dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA or IBC, for safe installation and operating practices.
    OSHA Compliant 29 CFR 1910.25 and OSHA Compliant 29 CFR 1910.29—Stairs that meet OSHA standards are intended for use in private facilities, such as factories and other industrial settings. Set at a steeper angle than IBC (International Building Code) stairs, they require less floor space.
    Stair Risers—Add risers to OSHA compliant stairs to cover the vertical gap between steps and prevent debris from falling through.
    Stairs
    Stair Risers
    Overall
    Step
    Handrail
    Landing
    Ht. (A)
    Wd.
    Dp. (B)
    Climbing
    Angle
    No. of
    Steps
    Dp.
    Tread
    Wt. Cap.,
    lb.
    Ht.
    Color
    Mounting Hardware
    Included
    Assembly
    Specs. Met
    Each
    Each
    Galvanized Steel
     
    30" Wide Steps
    38" to 44"43"39" to 43"35° to 42°49 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T610000000008234T102000000
    47" to 53"43"48" to 53"35° to 42°59 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T62000000008234T10200000
    54" to 61"43"60" to 64"35° to 42°69 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T63000000008234T10200000
    62" to 69"43"69" to 75"35° to 42°79 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T64000000008234T10200000
    70" to 78"43"79" to 85"35° to 42°89 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T65000000008234T10200000
    79" to 86"43"90" to 93"35° to 42°99 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T66000000008234T10200000
    87" to 95"43"99" to 105"35° to 42°109 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T67000000008234T10200000
    96" to 104"43"109" to 115"35° to 42°119 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T68000000008234T10200000
    105" to 113"43"119" to 125"35° to 42°129 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T69000000008234T10200000
    114" to 130"43"139" to 150"35° to 42°149 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T71000000008234T10200000
     
    36" Wide Steps
    38" to 44"49"39" to 43"35° to 42°49 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T72000000008234T10300000
    47" to 53"49"48" to 53"35° to 42°59 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T73000000008234T10300000
    62" to 69"49"69" to 75"35° to 42°79 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T74000000008234T10300000
    96" to 104"49"109" to 115"35° to 42°119 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T75000000008234T10300000
    114" to 130"49"139" to 150"35° to 42°149 1/2"Perforated1,80042"YellowNoUnassembledCal/OSHA Compliant Title 8 Section 3214, Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.298234T76000000008234T10300000
     

    Nonconductive Build-Your-Own Fixed Work Platforms

    Image of System. Shown Assembled. Front orientation. Contains Annotated. Work Platforms. Nonconductive Build-Your-Own Fixed Work Platforms.

    Shown Assembled

    Image of System. Side1 orientation. Contains Annotated, MultipleImages. Work Platforms. Nonconductive Build-Your-Own Fixed Work Platforms.
    Configure platforms to fit your application.
    First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface.
    Stairs
    Fiberglass—These platforms are nonconductive fiberglass.
    Grit-Coated Step—For good slip resistance, stairs are grit coated.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Steps
    Mounting
    Holes
    Platform
    Ht.
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Finish
    Wt. Cap.,
    lb.
    Color
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Specs. Met
    Each
    Fiberglass
    18"11"125 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T210000000
    27"20"225 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T22000000
    36"29"325 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T23000000
    45"38"425 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T24000000
     
    Stair Handrails
    Fiberglass—These platforms are nonconductive fiberglass.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Ht.
    Ht.
    Color
    Assembly
    Mounting Hardware
    Included
    Specs. Met
    Each
    Fiberglass
    27"42"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T320000000
    36"42"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T33000000
    45"42"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T34000000
     
    Platform Supports
    Platform supports are required at each end of a platform section. Supports must be used every 60", so 120" long platform sections also require a support in the middle.
    Fiberglass—These platforms are nonconductive fiberglass.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Mounting
    Holes
    For Platform
    Ht.
    Color
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Includes
    Specs. Met
    Each
    Fiberglass
    18"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T890000000
    27"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T82000000
    36"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T83000000
    45"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T84000000
     
    Platform Sections
    Fiberglass—These platforms are nonconductive fiberglass.
    Perforated—For good slip resistance, platforms are perforated.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Lg.
    Wd.
    Wt. Cap.,
    lb.
    Platform
    Tread
    Color
    Assembly
    Mounting Hardware
    Included
    Specs. Met
    Each
    Fiberglass
    30"30"500PerforatedGrayUnassembledNoCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T410000000
    60"30"500PerforatedGrayUnassembledNoCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T4200000000
    120"30"500PerforatedGrayUnassembledNoCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T4300000000
     
    Platform Handrails
    Platform handrails have built-in toeboards.
    Fiberglass—These platforms are nonconductive fiberglass.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Lg.
    Ht.
    Toeboard
    Ht.
    Color
    Assembly
    Mounting Hardware
    Included
    Specs. Met
    Each
    Fiberglass
    30"42"4"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T440000000
    60"42"4"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T45000000
     

    Enclosed Platform Step Ladders

    Image of Product. Adjustable Height. Front orientation. Ladders. Enclosed Platform Step Ladders.
    Image of Product. Fixed Height. Front orientation. Contains Annotated. Ladders. Enclosed Platform Step Ladders.
    Image of Attribute. Front orientation. Contains Annotated, Border. Enclosed Platform Step Ladders.

    Adjustable Height

    Fixed Height

    Unlike standard platform step ladders, these ladders have guardrails on all sides of the platform, allowing you to safely work with both hands while facing any direction. They are faster to set up and quicker to transport than other enclosed platforms, such as scaffolds and lifts. The gates only open in one direction, making it easy to step onto the platform while ensuring they stay closed during work. All ladders have nonconductive fiberglass rails and nonskid feet. They also have outriggers to create a wide base for added stability. Fold these ladders for compact storage and easy transport; tilt to roll them on their wheels.
    Note: The number of steps listed includes the platform.
    Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.
    Adjustable—Adjustable ladders slide up and down in 12" increments by unlocking the lever on each rail. Each rail also has a telescoping foot that adjusts independently for use on uneven surfaces.
    Type IA—Type 1A ladders are tested to hold up to 300 lbs.
    Type IAA—Type 1AA ladders are tested to hold up to 375 lbs.
    ANSI-ASC A14.5—ANSI-ASC A14.5 certifies dimensional and performance requirements for fiberglass ladders.
    Overall
    Platform
    Step
    Ht. (A)
    Wd. (B)
    Dp. (C)
    Maximum Climbing
    Height (D)
    Wd.
    (E)
    Dp.
    (F)
    Material
    Tread
    Wt. Cap.,
    lb.
    Ladder Duty
    Rating
    Wt.,
    lb.
    No. of
    Steps
    Material
    Tread
    Wheel
    Configuration
    Specs. Met
    Each
    Fiberglass Rail
     
    Fixed—With Outriggers
    76"35"47"44"21"18"Aluminum
    		Ribbed375Type IAA544Aluminum
    		RibbedFour Rigid Casters
    and Two Swivel
    Casters    		ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.5023688N24000000000
    99"38"61"67"21"18"Aluminum
    		Ribbed375Type IAA656Aluminum
    		RibbedFour Rigid Casters
    and Two Swivel
    Casters    		ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.5023688N2500000000
    122"41"75"89"21"18"Aluminum
    		Ribbed375Type IAA698Aluminum
    		RibbedFour Rigid Casters
    and Two Swivel
    Casters    		ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.5023688N2600000000
    12 ft.44"89"112"21"18"Aluminum
    		Ribbed300Type IA8110Aluminum
    		RibbedFour Rigid Casters
    and Two Swivel
    Casters    		ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.5023688N2700000000
     
    Adjustable—With Outriggers
    80" to 104"46"44" to 58"59"22"18"Aluminum
    		Ribbed375Type IAA804Aluminum
    		RibbedTwo Rigid Casters
    and Four Swivel
    Casters    		ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.5023688N1100000000
    104" to 152"46" to 83"57" to 91"105"22"18"Aluminum
    		Ribbed375Type IAA958Aluminum
    		RibbedTwo Rigid Casters
    and Four Swivel
    Casters    		ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.5023688N1200000000
    140" to 212"46" to 83"79" to 121"161"22"18"Aluminum
    		Ribbed375Type IAA12014Aluminum
    		RibbedTwo Rigid Casters
    and Four Swivel
    Casters    		ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.5023688N1300000000
     

    Easy-Adjust Scaffolds

    Image of ProductInUse. Front orientation. Contains Annotated. Scaffolds. Easy-Adjust Scaffolds.
    Turn the winch on these scaffolds to adjust the platform height from two to eleven feet in 6" increments. Plank has a perforated surface for good slip resistance. Spring-loaded pins lock it in place. Scaffold can be assembled by one person without tools.
    Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Base Sections
    Plank
    Overall
    Lg.
    Wd.
    Ht. (A)
    Lg.
    Wd.
    Platform Ht.
    (B), ft.
    Guardrail
    Ht.
    Color
    Wt. Cap.,
    lb.
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Painted Steel
    68"19"118 1/4" to 172"76 1/2"31 1/2" to 72"2 to 1143"Yellow550Four Swivel Casters4UnassembledBeam Assembly
    Guardrail
    Perforated Steel Plank
    Safety Chains
    Two Diagonal Braces
    Two End Frames    		ANSI/ASSP A10.8
    ASME B30.19
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.450    		8004T11000000000
     

    Uneven Surface Scaffolds

    Image of System. Shown Assembled. Front orientation. Contains Annotated. Scaffolds. Uneven Surface Scaffolds.
    Image of ProductInUse. Front orientation. Contains Border. Scaffolds. Uneven Surface Scaffolds.

    Shown Assembled

    Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height. You can change the plank height in 4" increments; use the spring-loaded pins to lock it in place.
    Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Scaffolds also meet CAL-OSHA standards, which is required for use in California.
    Base Sections
    Base sections have positioning guides that hold the plank within the frame. Sections roll on four locking swivel casters; install base plates (sold separately) when used on stairs. Do not stack more than two add-on height sections per base section.
    Plank
    Overall
    Platform
    Ht.
    Lg.,
    ft.
    Wd.
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Wheel
    Configuration
    Brake Type
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel
    76"628 1/2"629 1/2"79"1,000YellowFour Swivel CastersWheel Brake4UnassembledPlywood Plank
    Two End Frames with Adjustable Legs    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T120000000
    76"828 1/2"829 1/2"78"1,000YellowFour Swivel CastersWheel Brake4UnassembledPlywood Plank
    Two End Frames with Adjustable Legs    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T19000000
     
    Casters
    Wheel
    Stem
    Dia.
    Wd.
    Mount
    Ht.
    Wt. Cap. per
    Caster, lb.
    Dia.
    Lg.
    Wheel/Tread
    Material
    Caster Type
    Each
    5"1 1/8"6 1/4"2505/8"2"Rubber
    		Swivel with Brake8069T25000000
    Add-On Height Sections
    Cap., lb.
    Overall
    Lg., ft.
    Ht.
    with One Add-On
    Ht. Section
    with Two Add-On
    Ht. Sections
    Color
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel
    672"850700YellowUnassembledPlywood Plank
    Two End Frames    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T170000000
    872"850700YellowUnassembledPlywood Plank
    Two End Frames    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T21000000
     
    Guardrail/Toeboard Kits
    Guardrail/toeboard kits are required by OSHA when add-on height sections are used.
    Overall
    Lg., ft.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Color
    Assembly
    Specs. Met
    Each
    Powder-Coated Steel
    640"3"YellowUnassembledANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T140000000
    840"4"YellowUnassembledANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T22000000
     

    Tower Scaffolds

    Image of ProductInUse. Braces. Front orientation. Contains Annotated. Scaffolds. Tower Scaffolds.

    Braces

    Image of Product. Front orientation. Scaffolds. Tower Scaffolds, Caster Foot.
    Image of Product. Posts. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Front orientation. Scaffolds. Tower Scaffolds, Leveling Foot.

    Caster Foot

    Posts

    Leveling Foot

    Image of Product. Bottom Diagonal Braces. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Coupling Pins. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Toeboards. Front orientation. Contains Annotated. Scaffolds. Tower Scaffolds.

    Bottom Diagonal Braces

    Coupling

    Pins

    Toeboards

    Image of Product. End Frames. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Spring Clip. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Cross Braces. Front orientation. Scaffolds. Tower Scaffolds.

    End Frames

    Spring Clip

    Cross Braces

    Image of Product. Toeboards. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Casters. Front orientation. Scaffolds. Tower Scaffolds.

    Toeboards

    Casters

    Everything you need to build a tower scaffold. These kits include braces, end frames, guardrail posts, rails, plywood planks, and connecting pins. All scaffolds are made of powder-coated steel, so they’re rust resistant and durable for outdoor use. Use scaffold inspection tags to mark when a scaffold is ready to use or still being built.
    Note: Tower scaffolds meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Add toeboards (sold separately) to keep tools and materials from sliding off your platform.
    Caster Foot—Scaffolds with casters can be moved easily.
    Leveling Foot—Scaffolds with leveling feet can be adjusted for stability on uneven surfaces. Raise or lower each foot up to 18" to create a level platform.
    Overall
    Platform
    Ht.
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Brake/Lock Type
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel—With Caster Feet
    130"765 1/2"139"2,500BlueFour Swivel Casters4Wheel Brake and Swivel Lock (Total Lock)UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T112000000000
    130"1065 1/2"139"3,000BlueFour Swivel Casters4Wheel Brake and Swivel Lock (Total Lock)UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T11400000000
     
    Powder-Coated Steel—With Leveling Feet
    128"765 1/2"176"2,500Blue———UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T11100000000
    128"1065 1/2"176"3,500Blue———UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T11300000000
     
    Accessories and Replacements for Scaffolds
    End Frames
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    OD
    Material
    Color
    Assembly
    Specs. Met
    Each
    Step-Through with Ladder Frame
    60"60"5,1001 11/16"Powder-Coated SteelBlueAssembledCal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N110000000
     
    Braces
    Mounting
    Holes
    For Plank
    Lg., ft.
    Lg.
    Wd.
    Ht.
    OD
    Material
    No.
    of
    Dia.
    Specs. Met
    Each
    Cross Braces
    7—84"48"1"Galvanized Steel49/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N17000000
    10—120"48"1"Galvanized Steel49/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N16000000
     
    Bottom Diagonal Braces
    784"——1"Galvanized Steel29/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2200000
    1010"——1"Galvanized Steel29/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2100000
     
    Coupling Pins
    Pin
    Type
    Material
    Specs. Met
    Each
    CouplingGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2900000
    Pig Tail Pins
    Image of Product. Pig Tail. Front orientation. Scaffold Locking Pins. Tower Scaffolds.

    Pig Tail

    Each
    Package
    Pin
    Type
    Material
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Pig TailGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517587N1100000257587N12000000
    Spring Clip Pins
    Pin Type
    Material
    Specs. Met
    Each
    Spring ClipGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N3100000
    Casters
    Wheel
    Stem
    Dia.
    Wd.
    Mount
    Ht.
    Wt. Cap. per
    Caster, lb.
    Dia.
    Lg.
    For Pin
    Dia.
    Wheel/Tread
    Material
    Brake/Lock Type
    Specs. Met
    Each
    7 7/8"2"9"7501 3/8"3 15/16"3/8"Rubber
    		Wheel Brake and Swivel Lock (Total Lock)Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N27000000
    Leveling Jack Feet
    Image of Product. Front orientation. Jacks. Tower Scaffolds.
    Overall
    Base
    Thread
    Base Mounting
    Construction
    Wt. Cap.,
    lb.
    Max.
    Lift
    Ht.
    Wd.
    Lg.
    Wd.
    Wt.,
    lb.
    Material
    Size
    Lg.
    Fasteners
    Included
    No.
    of
    Hole
    Dia.
    Hole
    Ctr.-to-Ctr.
    Specs. Met
    Each
    Hollow5,30018"24"9 3/8"5 5/16"5 5/16"6Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N11000000
    Planks
    Image of Product. Front orientation. Scaffold Planks. Tower Scaffolds.
    Rail
    Wd.
    Ht.
    Features
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Specs. Met
    Each
    Plywood
     
    7 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		34AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T160000000
     
    10 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		46AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T18000000
     
    Posts
    Mounting
    Ht.
    OD
    Wt.,
    lb.
    Material
    Color
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    60"1 11/16"11Powder-Coated SteelBlueNo17/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N23000000
    Guardrails
    Image of Product. Front orientation. Scaffold Guardrails. Tower Scaffolds.
    Mounting
    Lg.,
    ft.
    OD
    Wt.,
    lb.
    Material
    Hardware
    Included
    No.
    of
    Hole
    Dia.
    Specs. Met
    Each
    End Rails
    51"3Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N11000000
     
    Side Rails
    71"5Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1200000
    101 1/4"9Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1300000
     
    Toeboards
    Toeboards—Add toeboards to keep tools and materials from sliding off your platform.
    Lg.,
    ft.
    Ht.
    Wt.,
    lb.
    Material
    Specs. Met
    Each
    56"11Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N32000000
    106"20Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N3400000
    846"14Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N3300000

    Scaffold Guardrails

    Image of ProductInUse. Front orientation. Contains Annotated. Scaffold Guardrails.
    Image of Product. Front orientation. Scaffold Guardrails.
    Add a barrier around your scaffold platform to prevent falls. These guardrails attach to posts (not included) on the edge of your platform. You can also replace sections of an existing barrier to make sure your scaffold meets safety requirements. Made of galvanized steel, these guardrails resist rust and hold up to outdoor use.
    Note: Guardrails meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Mounting
    Lg.,
    ft.
    OD
    Material
    Wt.,
    lb.
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    End Rails
    51"Galvanized Steel3No29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N11000000
     
    Side Rails
    71"Galvanized Steel5No29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1200000
    101 1/4"Galvanized Steel9No29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1300000
     

    Build-Your-Own Scaffolds

    Image of System. Front orientation. Contains Annotated, Inset. Scaffolds. Build-Your-Own Scaffolds.
    Mix and match these components to build a scaffold that suits your job. All components are compatible with each other, but they can’t be combined with other scaffold systems. They can be used indoors or outdoors. Add scaffold inspection tags to show whether a scaffold is under construction or ready for use.
    Note: Scaffold components meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Posts
    Image of Product. Posts. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Posts.

    Posts

    Add posts to a platform to support guardrails. They have welded pins that hold the guardrails in place. Attach the base of each post to your end frame with a coupling pin, a spring clip pin, and either a pig tail or a toggle pin (all sold separately).
    Mounting
    Ht.
    OD
    Color
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Wt.,
    lb.
    Specs. Met
    Each
    Powder-Coated Steel
    60"1 11/16"BlueNo17/16"11Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N23000000
     
    Toeboards
    Image of Product. Toeboards. Front orientation. Contains Annotated. Scaffolds. Build-Your-Own Scaffolds, Toeboards.
    Image of Product. Toeboards. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Toeboards.

    Toeboards

    Toeboards

    Use toeboards to create a raised edge around the platform so you don’t accidentally knock tools off the side.
    Ht.
    Lg.,
    ft.
    Wt.,
    lb.
    Specs. Met
    Each
    Galvanized Steel
    6"511Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N32000000
    6"1020Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N3400000
    6"8414Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N3300000
     
    back to top