OSHA compliant 29 CFR 1926.452 Ladders

Filter by

Overall Height

Ladder Configuration

Rail Material

Ladder Type

Number of Steps

Rail Color

Overall Width

Ladder Duty Rating

Wheel Configuration

Two Swivel and Four Rigid Casters

Four Swivel and Two Rigid Casters

Step Shape

Flat

Round

Weight Capacity

250 lb. to 499 lb.

Maximum Climbing Height

Step Tread

Top Step Material

Foldable

Assembled or Unassembled

Step Material

Overall Depth

Export Control Classification Number (ECCN)

EAR99

REACH

Not Compliant

DFARS Specialty Metals

RoHS

Weight

Platform Width

Platform Depth

13 Products

Enclosed Platform Step Ladders

Fixed Height

Adjustable Height

Unlike standard platform step ladders, these ladders have guardrails on all sides of the platform, allowing you to safely work with both hands while facing any direction. They are faster to set up and quicker to transport than other enclosed platforms, such as scaffolds and lifts. The gates only open in one direction, making it easy to step onto the platform while ensuring they stay closed during work. All ladders have nonconductive fiberglass rails and nonskid feet. They also have outriggers to create a wide base for added stability. Fold these ladders for compact storage and easy transport; tilt to roll them on their wheels.

ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.

Note: The number of steps listed includes the platform.

Adjustable ladders slide up and down in 12" increments by unlocking the lever on each rail. Each rail also has a telescoping foot that adjusts independently for use on uneven surfaces.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

O'all				Platform								Step
Ht. (A)	Wd. (B)	Dp. (C)	Max. Climbing Ht. (D)	Wd. (E)	Dp. (F)	Material	Tread	Cap., lbs.	Duty Rating	Wt., lbs.	No. of Steps	Material	Tread	Wheel Configuration	Specifications Met		Each
Fiberglass
Fixed Height—With Outriggers
6'4"	35"	47"	3'8"	21"	18"	Aluminum	Ribbed	375	Type 1AA	54	4	Aluminum	Ribbed	Two Swivel and Four Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276	0000000	000000000
8'3"	38"	61"	5'7"	21"	18"	Aluminum	Ribbed	375	Type 1AA	65	6	Aluminum	Ribbed	Two Swivel and Four Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276	0000000	00000000
10'2"	41"	75"	7'5"	21"	18"	Aluminum	Ribbed	375	Type 1AA	69	8	Aluminum	Ribbed	Two Swivel and Four Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276	0000000	00000000
12'	44"	89"	9'4"	21"	18"	Aluminum	Ribbed	300	Type 1A	81	10	Aluminum	Ribbed	Two Swivel and Four Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276	0000000	00000000
Adjustable Height—With Outriggers
11'8"-17'8"	46"-83"	79"-121"	13'5"	22"	18"	Aluminum	Ribbed	375	Type 1AA	120	14	Aluminum	Ribbed	Four Swivel and Two Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276	0000000	00000000
8'8"-12'8"	46"-83"	57"-91"	8'9"	22"	18"	Aluminum	Ribbed	375	Type 1AA	95	8	Aluminum	Ribbed	Four Swivel and Two Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276	0000000	00000000
6'8"-8'8"	46"	44"-58"	4'11"	22"	18"	Aluminum	Ribbed	375	Type 1AA	80	4	Aluminum	Ribbed	Four Swivel and Two Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502, Cal/OSHA Compliant Title 8 Section 3276	0000000	00000000

Telescoping Multifunction Ladders

Scaffold (Plank Not Included)

Stairwell Ladder

Straight Ladder

Step Ladder

Step Ladder (Shown Extended)

These ladders have movable sections that extend and collapse into one another so you can adjust them to the height you need. Configure them into step ladders, straight ladders, stairwell ladders, or scaffolding stands. When used as scaffolding stands, 12" wide planks (not included) must be placed 3 feet from the ladder base.

Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.

Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Scaffold brackets (sold separately) are required to use these ladders as scaffolding stands.

Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed when used as a straight ladder. Ladders also meet CAL-OSHA standards, which is required for use in California.

			Step
Overall Ht. (Ladder Configuration)	Overall Wd.	No. of Steps	Material	Tread	Wheel Configuration	Specifications Met		Each
Aluminum
Type 1A (300-lb. Cap.)
6 ft.-11 ft. (Step), 13 ft.-23 ft. (Straight), 6 ft. (Scaffold)	29"	22	Aluminum	Ribbed	Two Rigid Casters	ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276	0000000	0000000
Type 1AA (375-lb. Cap.)
4 ft.-7 ft. (Step), 8 ft.-14 ft. (Straight), 4 ft. (Scaffold)	24"	14	Aluminum	Ribbed	__	ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276	0000000	000000
5 ft.-9 ft. (Step), 10 ft.-18 ft. (Straight), 5 ft. (Scaffold)	27"	18	Aluminum	Ribbed	__	ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276	0000000	000000
Fiberglass
Type 1A (300-lb. Cap.)
3 ft.-5 ft. (Step), 6 ft.-10 ft. (Straight), 3 ft. (Scaffold)	29"	10	Aluminum	Ribbed	Two Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276	0000000	000000
5 ft.-9 ft. (Step), 11 ft.-19 ft. (Straight), 5 ft. (Scaffold)	29"	18	Aluminum	Ribbed	Two Rigid Casters	ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276	0000000	000000

Scaffold Brackets for Fiberglass Ladders

0000000

Pair

000000