For every 1/4" of thickness there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Similar to plaster, these adhesive-impregnated sheets and strips become moldable when water is added and harden as they dry. They can be used in sealing, insulating, and covering applications.

With larger openings than porous fiberglass fabric, these sheets allow for more air circulation in drying applications.

These sheets can be grounded to reduce static electricity.

Resistant to sparks and molten metal spatter, this fabric withstands temperatures up to 1000° F. It's often used for curtains, blankets, and gaskets.

This abrasion-resistant fabric sheds molten metal spatter when placed at an incline of 15° or greater. Use as a welding curtain.

Use these strips for high-temperature seals and heat insulation.

This temperature-resistant fabric is more cut resistant than Nomex.

These loosely knitted fiberglass seals are more flexible, compressible, and conformable than High-Temperature Rope Edge Seals.

These loosely-knitted fiberglass seals are more flexible and conformable than High-Temperature Slotted Edge Seals. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

Able to withstand temperatures up to 1000° F, these seals have a fiberglass cover and core that resists most refrigerants, salts, and grease.

Fiberglass fibers run along the length of this general purpose strapping tape.

Use this tape for light duty bundling and strapping. Fiberglass fibers run along the length.

When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.

Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.

Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.

Also known as roller tape, this tape is coated with silicone to grip smooth surfaces and resist sticky substances, such as ink. It adheres to itself without adhesive.

Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

SG-200 fiberglass withstands temperatures up to 410° F—higher than any of our other fiberglass raw materials. It’s also stronger than FRP fiberglass and easy to machine.

This FRP fiberglass is made with a chemical-resistant resin that stands up to harsh environments.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Resisting heavy impacts and temperatures up to 500° F, these Garolite sheets are used in machinery such as turbine bearings and downpipe gaskets.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

Known for its use in the aerospace industry, where a balance of weight and strength is critical, carbon fiber is now often machined into panels for structural framing, machinery components, and robotics.

A layer of foam is sandwiched between two pieces of carbon fiber to make a featherweight material that's even lighter than standard carbon fiber.

Almost as stiff as steel and a fraction of the weight, these carbon fiber sheets are often used for structural framing, machinery components, and robotics.

Each pack includes one 2" circle of GPO3 fiberglass and Garolite XX, XXX, CE, LE, G-3, G-7, G-9, G-10, and G-11.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Kevlar is a super-tough material that stands up to wear and abrasion.

This common insulation material is typically used on hot and cold water lines and in process piping.

Made of flexible composite paper, these sheets won't shrink or lose shape in the high temperatures of air furnaces and hot water tanks.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

Protect equipment and surfaces from radiant heat.

Wrap rectangular and round ductwork with this flexible insulation.

Grommets along one side make it easy to install these sheets around your facility and quiet noisy areas. Made of vinyl-coated fiberglass, they resist abrasion, oil, dirt, moisture, and most solvents.

Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.