McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    71 Products

    Peel-Away Multilayer Shim Stock

    Image of ProductInUse. Front orientation. Shim Stock. Peel Away, Sold Individually, Multilayer.
    Fine-tune thickness without worrying about stacking multiple shims. Cut the shim stock into custom shapes that suit your needs. It's made of layers of material bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the created shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Thk.
    Thk. Tolerance
    No. of
    Layers
    Layer
    Thk.
    Specs. Met
    Form
    Each
    18-8 Stainless Steel
     
    12" Wide × 12" Long
    0.008"-0.0005" to 0.001"40.002"SAE AMS-DTL-22499Sheet9718K41000000
    0.01"-0.0005" to 0.0015"50.002"SAE AMS-DTL-22499Sheet9718K4200000
    0.015"-0.001" to 0.0015"50.003"SAE AMS-DTL-22499Sheet9718K5100000
    0.016"-0.001" to 0.0015"80.002"SAE AMS-DTL-22499Sheet9718K4300000
    0.02"-0.001" to 0.002"90.002"SAE AMS-DTL-22499Sheet9718K4400000
    0.021"-0.001" to 0.002"60.003"SAE AMS-DTL-22499Sheet9718K5200000
    0.032"-0.002" to 0.003"150.002"SAE AMS-DTL-22499Sheet9718K4500000
    0.033"-0.002" to 0.003"100.003"SAE AMS-DTL-22499Sheet9718K5300000
    0.048"-0.002" to 0.005"150.003"SAE AMS-DTL-22499Sheet9718K54000000
    0.048"-0.002" to 0.005"220.002"SAE AMS-DTL-22499Sheet9718K46000000
    0.062"-0.002" to 0.006"280.002"SAE AMS-DTL-22499Sheet9718K47000000
    0.063"-0.002" to 0.006"190.003"SAE AMS-DTL-22499Sheet9718K55000000
    0.093"-0.003" to 0.009"280.003"SAE AMS-DTL-22499Sheet9718K56000000
    0.094"-0.003" to 0.009"430.002"SAE AMS-DTL-22499Sheet9718K48000000
    0.124"-0.003" to 0.012"560.002"SAE AMS-DTL-22499Sheet9718K49000000
    0.126"-0.003" to 0.012"380.003"SAE AMS-DTL-22499Sheet9718K57000000
     
    20" Wide × 24" Long
    0.008"-0.0005" to 0.001"40.002"SAE AMS-DTL-22499Sheet9718K1100000
    0.01"-0.0005" to 0.0015"50.002"SAE AMS-DTL-22499Sheet9718K12000000
    0.015"-0.001" to 0.0015"50.003"SAE AMS-DTL-22499Sheet9718K22000000
    0.016"-0.001" to 0.0015"80.002"SAE AMS-DTL-22499Sheet9718K13000000
    0.02"-0.001" to 0.002"90.002"SAE AMS-DTL-22499Sheet9718K14000000
    0.021"-0.001" to 0.002"60.003"SAE AMS-DTL-22499Sheet9718K23000000
    0.032"-0.002" to 0.003"150.002"SAE AMS-DTL-22499Sheet9718K15000000
    0.033"-0.002" to 0.003"100.003"SAE AMS-DTL-22499Sheet9718K24000000
    0.048"-0.002" to 0.005"150.003"SAE AMS-DTL-22499Sheet9718K25000000
    0.048"-0.002" to 0.005"220.002"SAE AMS-DTL-22499Sheet9718K16000000
    0.062"-0.002" to 0.006"280.002"SAE AMS-DTL-22499Sheet9718K37000000
    0.063"-0.002" to 0.006"190.003"SAE AMS-DTL-22499Sheet9718K26000000
    0.093"-0.003" to 0.009"280.003"SAE AMS-DTL-22499Sheet9718K27000000
    0.094"-0.003" to 0.009"430.002"SAE AMS-DTL-22499Sheet9718K18000000
    0.124"-0.003" to 0.012"560.002"SAE AMS-DTL-22499Sheet9718K19000000
    0.126"-0.003" to 0.012"380.003"SAE AMS-DTL-22499Sheet9718K28000000
     

    Peel-Away Multilayer Shims

    Image of Product. Front orientation. Shims. Sold Individually, Peel Away, Multilayer, Round.
    Fine-tune thickness without worrying about stacking multiple shims. These shims are made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, all of these shims precisely align, space, and level components on shafts, arbors, and machinery.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Thk.
    Thk. Tolerance
    ID Tolerance
    OD Tolerance
    No. of
    Layers
    Layer
    Thk.
    Min.
    Hardness
    Specs.
    Met
    Each
    18-8 Stainless Steel
     
    3/8" ID × 5/8" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Rockwell B75ASTM A66690902A221000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Rockwell B75ASTM A66690902A22200000
     
    1/2" ID × 3/4" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Rockwell B75ASTM A66690902A22300000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Rockwell B75ASTM A66690902A22400000
     
    5/8" ID × 1" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Rockwell B75ASTM A66690902A22500000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Rockwell B75ASTM A66690902A22600000
    0.125"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"620.002"Rockwell B75ASTM A66690902A22700000
     
    3/4" ID × 1 1/8" OD
    0.125"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"620.002"Rockwell B75ASTM A66690902A22800000
     
    7/8" ID × 1 3/8" OD
    0.125"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"620.002"Rockwell B75ASTM A66690902A22900000
     

    Peel-Away Multilayer Made-to-Order Shims

    Image of Product. Front orientation. Shims. Multilayer, Sold Individually, Made-to-Order, Peel Away.
    If you need a unique peel-away shim shape or size, we’ll precision cut it for you. Use these shims to fine-tune thickness without worrying about stacking multiple shims. They're made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, all of these shims precisely align, space, and level components on shafts, arbors, and machinery.
    Send your dimensioned DWG, DXF, IGES, or STEP file to sales@mcmaster.com. Please leave at least 1/8" wall between shim edge and holes. Minimum hole size is 1/4". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Material Certificate—Shims include a report with a traceable lot number.
    2" × 2" Maximum
    Shim Size
    5" × 5" Maximum
    Shim Size
    7" × 7" Maximum
    Shim Size
    11" × 11" Maximum
    Shim Size
    23" × 23" Maximum
    Shim Size
    Thk.
    Thk. Tolerance
    No. of
    Layers
    Layer
    Thk.
    Min.
    Hardness
    Certificate Type
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    0.008"-0.0004" to 0.0004"40.002"Rockwell B80Material CertificateASTM A2401611885N3670000000411885N3740000000911885N3810000000411885N3870000000111885N3940000000
    0.016"-0.0008" to 0.0008"80.002"Rockwell B80Material CertificateASTM A2401611885N368000000411885N375000000911885N382000000411885N388000000111885N395000000
    0.032"-0.0016" to 0.0016"160.002"Rockwell B80Material CertificateASTM A2401611885N369000000411885N376000000911885N383000000411885N389000000111885N396000000
    0.048"-0.0024" to 0.0024"240.002"Rockwell B80Material CertificateASTM A2401611885N371000000411885N377000000911885N384000000411885N391000000111885N397000000
    0.062"-0.0031" to 0.0031"320.002"Rockwell B80Material CertificateASTM A2401611885N372000000411885N378000000911885N385000000411885N392000000111885N398000000
    0.124"-0.0062" to 0.0062"620.002"Rockwell B80Material CertificateASTM A2401611885N373000000411885N379000000911885N38600000000411885N39300000000111885N39900000000
     
    back to top