A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Garolite CE is often fabricated into parts where high strength is not required.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11/FR 5 sheets are suitable for continuous use in elevated temperatures. With a black coating that reduces static electricity, these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.

Resisting heavy impacts and temperatures up to 500° F, these Garolite sheets are used in machinery such as turbine bearings and downpipe gaskets.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

More electrically insulating than Garolite XX, these tubes are often machined into insulating washers, bushings, transformer spacers, and parts of terminal boards.

Layers of fibers alternating in four directions makes this carbon fiber stiff at the corners and edges, so it stands up to twisting forces.

Often used in place of aluminum for structural frames, machinery components, and robotics, these tubes are lighter in weight and almost as rigid.

Reinforce structures with these rods—they weigh less than aluminum while remaining strong and almost as rigid.

Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.

Often used to make railings, edge covers, and other structural framing parts, these carbon fiber U-channels add stiffness and strength to applications without adding a lot of weight.

Often used for structural framing, machinery components, and robotics, these carbon fiber tubes are as stiff as steel yet a fraction of the weight.

Often used to build frames and structures, these lightweight sheets combine the strength and stiffness of carbon fiber with the impact resistance of Kevlar.

Unlike similar U-channels, these GPO3 fiberglass hat channels have flanges for mounting to flat surfaces. Use them to route and insulate wire in humid environments.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

With more than twice the heat tolerance of standard FRP fiberglass, this material withstands temperatures up to 370° F.

This FRP fiberglass is made with a chemical-resistant resin that stands up to harsh environments.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Kevlar is a super-tough material that stands up to wear and abrasion.

Made of thin layers of wood glued together under heat and pressure, plywood sheets are durable, yet lightweight.

Lighter in weight than any other wood, yet still strong, these balsa cores stiffen composite sandwiches without weighing them down.

Add stiffness to composite sandwiches without adding a lot of weight.

Also known as breadboards or proto-boards, these boards have 0.042” dia. holes with solder pads.

Unlike metal rods, these metric threaded rods will not warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.