Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Also known as pendant lights, these fixtures hang from a cord.

Install sockets for medium (standard household) screw-in base light bulbs.

Lengthen pull-chain light switches.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Mount lights in recessed spaces so the lens is flush with the wall.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Connect the hooks to a fixture to suspend lights from the ceiling.

A sealed lens keeps moisture out to protect these lights against washdowns.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Also known as wall packs, these lights mount to exterior walls and ceilings.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Bring light to areas that don't have electrical power service.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines.

Illuminate your electronics cabinets and racks with long-lasting LED lights.

Rated for use in damp locations, these lights withstand humidity and moisture.

These lights are UL rated for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

Block the transmission of ultraviolet light.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Hardwire these sockets to a power source.

Fasten lamp pipe to a socket or base.

Convert a fixture that uses medium-base bulbs to accept GU24 bi-pin base bulbs with these adapters.

Use these extenders when bulbs are too short to fit into deep or recessed fixtures.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

Textured surfaces and irregularities are more visible.

Use where electrostatic discharge is a concern.

Lock the adjustable arm into position to maintain a steady view even near vibrating machinery.

Small enough to fit in your pocket, these flashlights are good for detecting leaks in piping systems.

Use for inspection and bug and rodent detection.

Attracted by the bright UV light bulbs, flying insects will receive a lethal shock when they come into contact with the electrified metal grid.

Disinfect objects, surfaces, or entire rooms—these lamps kill viruses, bacteria, and other microbes with ultraviolet germicidal irradiation (UVGI).

Disinfect phones, doorknobs, masks, and other small objects. Using ultraviolet germicidal irradiation (UVGI), these portable lamps kill viruses, bacteria, and other microbes in seconds.

Turn a light socket into a radiant heater. These lamps generate heat with a ceramic element rather than an infrared bulb.

Clamp to the edge of a workbench or table and adjust the arm to direct heat where you need it.

Position these lamps 6"-8" from what you want to heat.

Set the lamp on a bench top and rotate the head 360° to direct light.

Use these cordless lamps for UV curing as well as leak detection, quality control inspection, and testing.

These filters fit over miniature light bulbs with a bulb diameter up to 7/16".