No need to reposition these lasers as you work around your room—crosshairs on every surface give you all the reference points you need. They are a good choice for level, plumb, and square applications, such as aligning doors and windows on multiple walls. If you set them on a surface, they level themselves within about 4° and indicate when they are out of level. You can turn this function off when you want to make sure your crosshair is level with something other than the Earth.

Secure them to a tripod using the threaded mount or use the strong magnetic base to attach them to equipment. They come with a magnetic target, which you can mount in your space to reflect the laser beam to increase its visibility in dim conditions and at far distances.

Level equipment with confidence—in addition to a crosshair, these lasers also project plumb dots, so you know the laser is in the right spot. They’re an upgrade from a standard crosshair laser while remaining simpler than lasers with multiple crosshairs. Use these lasers to precisely install square elements, such as doors and windows. The crosshair extends along your wall, so you don’t have to reposition the laser often as you work around your room. If you set them on a surface, these lasers level themselves within about 4° and indicate when they are out of level. You can turn this function off when you want to make sure your crosshair is level with something other than the Earth.

Secure them to a tripod using the threaded mount or use the strong magnetic base to attach them to equipment. They come with a magnetic target, which you can mount in your space to reflect the laser beam to increase its visibility in dim conditions and at far distances.

Levels with two laser dots help you verify your installation is plumb with reference points above and below the tool. These red lasers are best for indoor environments, since they’re dimmer than green lasers.

Levels with five laser dots help you verify that your tool is positioned correctly in multiple dimensions with reference points above, below, behind, and to the sides of the tool without repositioning your laser. These green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors or in bright indoor lighting, as well as from far away.

Verify your installation is level using a single reference point. These green lasers appear up to 10 times brighter than red lasers for visibility from farther away and in brightly lit areas, including outdoors. Five bubble vials confirm level, plumb, and a specific angle. One vial is a pitch gauge, which shows slope in 1/8" increments to help check drainage. For quick and easy mounting, these levels have a magnetic base. It's strong enough to hold even on vibrating equipment.

Project a bright, vivid reference point to hang light fixtures, align workbenches, or even guide your machine vision camera. These lasers are small enough to fit on virtually any machine.

Line lasers work well for marking cut lines for saws, aligning rollers on conveyor belts, and checking that the edge on a machined part is straight. They project a line that is even and bright the entire length.

Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.

DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off. Magnetic mounts (sold separately) attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle. Adjustable-angle mounts (sold separately for some items) rotate in any direction, so you can swivel the laser to the correct angle for your job without having to reposition the entire mount.

IP67 rated, these lasers have a lens that's sealed to keep out dust and water. They're often used to create reference points for machine vision cameras and robots.

Dot lasers work well for indicating a drill point and positioning workpieces on lathes, presses, and CNC machines. They come with a magnetic mount that attaches to steel surfaces, so you don't have to drill holes in your machinery. The mount holds the laser at a fixed angle. Line lasers work well for marking cut lines for saws, aligning rollers on conveyor belts, and checking that the edge on a machined part is straight. They project a line that is even and bright along the entire length.

Red lasers are best viewed indoors and at short distances. Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.

Hardwire DC lasers to programmable logic controllers (PLCs) and timer relays to automate when they turn on and off. For 5V and 8V DC lasers, you'll need to cut off their plug to hardwire them. Their plug fits into an AC adapter (sold separately).

Adjustable-angle mounts (sold separately for some lasers) rotate in any direction, so you can swivel the laser to the correct angle for your job without having to reposition the entire mount.

For technical drawings and 3-D models, click on a part number.