Set these lasers on any surface, and they'll level themselves within about 4°. Whether you’re hanging a drop ceiling or aligning bench tops, they project accurate level references to make sure your installation will be at the right height. You can also mount them in a few different ways. They have a threaded insert to attach to a tripod (sold separately). Or use the magnetic base, which is strong enough to hold even on vibrating equipment.

Verify your installation is level using a single reference point. These green lasers appear up to 10 times brighter than red lasers for visibility from farther away and in brightly lit areas, including outdoors. Five bubble vials confirm level, plumb, and a specific angle. One vial is a pitch gauge, which shows slope in _1/8" increments to help check drainage. For quick and easy mounting, these levels have a magnetic base. It's strong enough to hold even on vibrating equipment.

Level equipment with confidence—in addition to a crosshair, these lasers also project plumb dots, so you know the laser is in the right spot. They’re an upgrade from a standard crosshair laser while remaining simpler than lasers with multiple crosshairs. Use these lasers to precisely install square elements, such as doors and windows. The crosshair extends along your wall, so you don’t have to reposition the laser often as you work around your room. If you set them on a surface, these lasers level themselves within about 4° and indicate when they are out of level. You can turn this function off when you want to make sure your crosshair is level with something other than the Earth.

Secure them to a tripod using the threaded mount or use the strong magnetic base to attach them to equipment. They come with a magnetic target, which you can mount in your space to reflect the laser beam to increase its visibility in dim conditions and at far distances.

Project two intersecting lines to ensure equipment is level and plumb. Set these laser levels on any surface and they'll level themselves within about 4°. They’re often used to align bench tops in shops and labs.

Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle. The laser lines are best viewed indoors.

Check that your pulley, gear, or sprocket system is properly aligned. These magnetic lasers stick to equipment made of steel. Project the laser beam down your belt or chain and look to see how it hits the target—you can determine angular and offset misalignment at the same time. The target has a machined surface that sits parallel to the contact surface for precise alignment. Adjust your setup until the laser line overlaps with the reference line on the target. These lasers are portable and battery powered, so they’re easy to use in spaces without outlets.