We will reply to your message within an hour.
Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.
Designed for use in 1/2" dia. through holes.
Made of plastic, these locks are suitable for damp and humid environments.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.
To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.
Meet U.S. postal service guidelines for mailbox locks.
These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.
A stainless steel shutter blocks rain, snow, and dirt from entering the cylinder where they can cause internal damage.
Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.
Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.
These locks open with their own unique key as well as a master key.
These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.
Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.
A red indicator on the lock face is visible when unlocked and hidden when locked.
Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.
These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
For protection against dust, dirt, and washdowns, these locks are IP65 rated.
Designed for use in 1/4" or 1/2" dia. through holes.
These locks require a hex key to open.
Open multiple locks with the same key.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
The mounting screws on these locks are concealed to prevent tampering.
Open each of these locks with a different key.
A master key opens all of these locks, which also have their own unique keys.
Choose these locks if you need to open several with the same key.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
Open these locks with both a master key and their own unique key.
Choose these locks if you need each one to open with a different key.
With a molded inset grip, the handle remains recessed to stay out of the way.
Fold the ring handle into the recess to stay out of the way when not in use.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Press the button and the handle snaps open; push the handle shut for a secure hold.
Raise the handle and it swings smoothly for easy latching and unlatching.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
The mounting screws on these latches are concealed to prevent tampering.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
With a flat inset grip, the handle is recessed to stay out of the way.
With a finger-grip knob, these latches fit where latches with handles won't.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.
Similar to locks on a hotel safe, each user sets a new combination.
Set a combination and reset it at any time.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.
Secure these latches with a padlock.
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.
An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
To open, push in the knob and pull the tab.
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
Keep doors on refrigerators and industrial enclosures closed.
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.
Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.
Close and open these magnetic latches with a push—there's no need for a handle.
Magnetic force holds doors closed.
Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.
To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.
These latches withstand temperatures up to 480° or 570° F.
Turn the screw on the latch to adjust the gripping force on the strike plate.
These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.
A catch grabs and holds the strike plate to keep doors shut.
Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.
Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.
Close and open these grab latches with a push—there's no need for a handle.
An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.
Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
Close and open these roller latches with a push—there's no need for a handle.
Doors stay closed with the pressure of rollers against the strike plate.
There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.
To prevent doors from slamming, these latches are hydraulic.
Push in the knob to open these latches.
When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.
The low profile means less of the lock is exposed, reducing the potential for damage.
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Operate these padlockable latches from either side of the door—there is a handle on both sides.
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
Use these latches alone for single-point latching, or add latch kits for more holding power.
Choose these locks if you need several that open with the same key.
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.
Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.
Choose these L-handle locks if you need several that open with the same key.
Choose these keyed alike locks when you need several that open with the same key.
The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.
Choose these keyed alike locks if you need several that open with the same key.
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.
Choose these locks if you need several locks that open with the same key.
Choose these locks if you need locks that each open with a different key.
A red indicator on the side of these locks is visible when they are open and hidden when they are locked.
No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.
Push the bolt into the strike plate to secure doors, gates, and cabinets.
Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.
Pull the chain-grip to unlatch hard-to-reach doors and panels.
Bolts are spring-loaded to stay latched until you activate the pull.
A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.
Slide the bolt and drop the knob into the notch to secure.
The strike has angled ends so these latches can accept their bolt even when doors become misaligned.
The mounting screws on these padlockable latches are concealed to prevent tampering.
A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.
These padlockable latches are reversible for right- and left-hand mounting.
These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.
Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.
These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.
Each of these cabinet locks opens with its own key.
Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.
Open multiple cabinet locks with the same key.
With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt cabinet door locks.
Open multiple cabinet locks with their own keys, as well as with a master key.
To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.
These strikes fit most deadbolt-style locks.
Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.
These latches are reversible for right- and left-hand mounting.
In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.
Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.
Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.
To prevent accidental unlatching due to vibration, there's a bushing in the eye.
Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.
Turn the padlock eye to fasten these hasps without a padlock.
Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.
Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.
Choose these hasps if you need hasps that each open with a different key.
Choose this hasp if you need several hasps that open with the same key.
Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.
Choose these cylinders if you need cylinders that each open with a different key.
Choose these cylinders if you need several cylinders that open with the same key.
Choose these cylinders if you need cylinders that each open with a different key and also open with a master key.
In addition to sliding gates, these locks are for use on cantilever and fixed-roller gates.
With a key-locking mechanism, these locks provide more security than other gate locks.
Safeguard sliding doors in wire and chain link partitions.
Push to close and pull up on the latch arm to open these padlockable latches.
A hidden push-button release on the bottom of these latches retracts the latch bolt; this discourages unwanted entry but allows access to those who know it’s there.
Secure swinging doors in wire and chain link partitions.
Hold bathroom doors closed by swinging these latches into a notch in the strike plate.
Slide these latches into the strike plate to secure bathroom doors.
These concealed latches snap together—no mounting fasteners required.
This lock has a latch bolt to secure doors in the closed position.
A guard over the latch prevents tampering.
Gain access from the outside with a combination or an included key. These automatically lock when you close the door.
Often used on restroom doors, a message on the outside of the door changes when the lock is engaged or disengaged. Locks open with a turnpiece inside and an emergency access tool outside.
Designed to withstand vandalism better than other deadbolt locks for double doors, these mortise mount into a cutout in the doors.
Enter a combination and turn the turnpiece to unlock these locks from the outside; they automatically lock when you close the door.
Enter a combination and turn the turnpiece to unlock these locks from the outside; turn the inside or outside turnpiece to manually relock them.
Use the same key to lock and unlock multiple deadbolts, or use the turnpiece on the inside to open the door.
Lock and unlock the deadbolt with a turnpiece on the inside and a key on the outside. These locks each have different keys.
Choose these lock cylinders if you need several lock cylinders that open with the same key.
Choose these lock cylinders if you need lock cylinders that each open with a different key.
Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door.
Choose these lock cylinders if you want individual lock cylinders or groups of lock cylinders that open with their own key, but also open with a master key.
Also known as rim lock cylinders, these are for use in locks that are mounted to the door's surface.
Maintain security by keeping your door latched as you open it up to 3".
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.